Whitmor 6037-7037-WHT User manual

Page 1
©2021 Whitmor, Inc.
Part Reference
A
B
C
D
E
F
G
H
I
J
F11673
F11674
F11675
F11676
F11677
F11678
F11679
F11523
F11680
F11681
No additional tools required
if hanging over the door.
Hex wrench provided.
Phillips screwdriver and drill
needed if wall-mounting.
G1 ea
Mesh Shelves
H1 ea
Hex Wrench
I4 ea
Wall Screws
J4 ea
Wall Anchor
E28 ea
Hex Screws
F2 ea
Over the Door Brackets
C2 ea
Top Vertical Frames with Push Tab
A14 ea
Horizontal Poles
B4 ea
Middle Vertical Frames
D2 ea
Bottom Vertical Frames
NOTE: Part (J & K) is for
optional mounting of frame.
6037-7037-WHT | 36-Pair Over the Door Shoe Rack
STYLE NO:

Page 1
©2021 Whitmor, Inc.
STEP 1:
Place one of each frame sections (C,D) and two of
middle frame section (B) on a flat hard surface and clip
together with the push tabs.
Attach thirteen horizontal poles (A) to frame sections
using thirteen hex screws (E).
Tighten with hex wrench (H).
Install over the door bracket (F) by sliding onto the top
vertical frame pole (C) past the first hole.
STEP 2:
Attach remaining horizontal pole (A) and hex screw
(E) behind the bracket (F).
Tighten with hex wrench (H).
Unfold the mesh shelves (G) and install onto
horizontal poles.
NOTE: Make sure the tag is at
the top of mesh shelves. This
tag denotes the top of the rack.
C
F
E
E
E
E
E
E
B
A
A
A
A
A
A
E
E
E
B
A
A
A
E
E
EE
D
A
A
AA
C
F
E
A
G
6037-7037-WHT | 36-Pair Over the Door Shoe Rack
STYLE NO:

Page 1
©2021 Whitmor, Inc.
E
E
E
E
E
E
E
E
E
E
E
E
E
STEP 3:
Clip together remaining frame sections (B,C,D) with
the push tabs.
Install over the door bracket (F) by sliding onto the top
vertical frame pole (C) past the first hole.
STEP 4:
Align assembled side frame section with horizontal poles
(A) and attach using hex screws (E).
Tighten with hex wrench (H).
A
A
A
A
A
A
A
A
A
A
A
A
A
A
F
C
B
D
B
E
F
C
B
D
B
6037-7037-WHT | 36-Pair Over the Door Shoe Rack
STYLE NO:

Page 1
©2021 Whitmor, Inc.
Rev#6 | 9.7.21 Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part, please call Whitmor’s Consumer Care Team, 1-888-944-8667 between 8 a.m. and 4:30 p.m.
(Central Standard Time) Monday through Friday, or email: [email protected]. Visit us online at www.whitmor.com
STEP 4:
Lift the assembled shoe rack and place over an interior door.
INSTRUCTIONS FOR WALL-MOUNTING:
Calculate and measure where the shoe rack will be
placed on the wall.
Insert wall anchors (J).
To use the over the door brackets (F) break off at
perforation.
Use a Phillips screwdriver to tighten screws (I) into wall.
WALL WALL
J
F
I
I
F
6037-7037-WHT | 36-Pair Over the Door Shoe Rack
STYLE NO: