Wicksteed LSW24BN User manual

PAG E OF 1 3
Wicksteed Leisure Ltd, Digby Street, Kettering, Northants NN16 8YJ Tel [phone] Fax [phone]
www.wicksteed.co.uk E [e-mail]
No part of this document may be copied or used without the express written permission of WICKSTEED LEISU E LTD (c) 2016
TRADITIONAL
BIRDS NEST SWING
LSW24BN
FFH
SIZE
AGE RANGE
PROD. CODE
L:3.06M W:3.0M H:2.57M
2.0M
3 MONTHS +
TECHNICAL DATA
MINIMUM SPACE REQUIRED
SUPERVISED PLAY
EQUIPMENT TYPE
LARGEST PART
RECOMMENDED
HEAVIEST PART
8.11M X 3.0M
LOW LEVEL
3.6m x Ø150mm (VERTICAL BEAM)
45KG (HORIZONTAL BEAM)
INSTALLATION DETAILS
1. READ INSTALLATION INSTRUCTIONS THOROUGHLY BEFORE COMMENCING INSTALLATION OF UNIT
2. EXCAVATE FOUNDATIONS USING THE DETAIL AS SHOWN ON PAGE 2 OF THIS DOCUMENT
3. ENSURE TO CHECK AND TIGHTEN ALL FIXINGS USING PROTECTIVE CAPS WHERE NECESSARY
4. BACKFILL FOUNDATIONS WITH CUBIC M CONCRETE ALLOWING TO SET FOR 48 HOURS
5. REMOVE ALL ASSEMBLY AIDS BEFORE THE EQUIPMENT IS USED
0.2
THIS PRODUCT CONFORMS WITH BS EN1176- :20081
Date:
Version: D
07/04/16
& BS EN1176- 2 :2008

PAG E OF 2 3
67.0°
SURFACE LEVEL
623.0
TO U/S
2565.0
100.0
2385.0
600.0
ALL FOUNDATIONS 1000 X 400 X 500 DEEP UNLESS OTHERWISE SPECIFIED
2400.0
3400.0
3400.0
2550.0 2850.0
4342

PAG E OF 3 3
17.1 SQ METRES WETPOUR SURFACING
19.1 LINEAR METRES WETPOUR EDGING
19.5 SQ METRES LOOSEFILL SURFACING
21.1 LINEAR METRES LOOSEFILL EDGING
15 GRASS SAVER MATS 1.5M X 1.0M)
8110.0
2400.0
7500.0
3000.0

PAGE OF 1 2
Wicksteed Leisure Limited, Digby Street, Kettering, Nort amptons ire NN16 8YJ Tel: [phone] Fax: [phone] ttp://www.wicksteed.co.uk Email:[email protected]
No part of t is document may be copied or used wit out t e express written permission of WICKSTEED LEISURE LIMITED (c) 2016
3rd Angle
Projection
Date:
Drawn By:
Drawing Number:
S eet:
Issue Date:
Sign:
Issue:Code:
High Level 1000 Birds Nest Swing Installation/Assembly LSW24
LSW24BN
LSW24BN-IN-AY
AK
OF
12
25/11/09
Parts List
ITEM QTY PART NUMBER DESCRIPTION
1 1 FRTB00535 BIRDS NEST SWING TIMBER SET
2 1 BNS ASSY BIRDS NEST SWING ASSEMBLY
3 2 M12X280CB M12 x 280 COACH BOLT
4 4 M12X300CB M12 x 300 Coac Bolt
5 6 M12WASH 32MM 12G WASHER
Parts List
ITEM QTY PART NUMBER DESCRIPTION
6 6 M12NYLOC M12 NYLOC NUT
74 M16NYLOC M16 NYLOC NUT
8 4 M16SWASH M16 32MM PLAIN WASHER
9 10 PLC480DCAP POLY CAP 48
B
20/05/11
AK
NOTE:
READ INSTRUCTIONS THOROUGHLY BEFORE COMMENCING INSTALLATION OF UNIT
ENSURE ALL INSTALLATION AIDS ARE REMOVED AND PROTECTIVE CAPS IN PLACE BEFORE FIRST USE
12/03/12
C
AK
D E
08/11/13 09/01/14
AK AK
F
07/11/14
AK
G
08/04/16
AK

PAGE OF 2 2
B
D
SWING FRAME ASSEMBLY
Excavate t e foundations as detailed on page 2 of t e document LSW24BN-SPEC. For Barkpit Installation ensure t e unit is 300mm ig er to account for t e surfacing.
As illustrated in Detail View A, create bot of t e A-Frame support sections of t e swing frame by positioning t e two posts labelled A & B toget er and securing wit t e
supplied Coac Bolt. Wit bot A-Frames secured and propped in t e foundation ole, position post labelled 'C' on top securing in place wit t e supplied Coac Bolts.
DETAIL VIEW A
NOTE: Lift with extre e caution as unit is heavy and ay require heavy lifting apparatus.
Wit t e main frame now complete, ensure all fixings ave been tig tened and security caps in place. Backfill foundation oles wit concrete and allow to set for 48 ours.
DETAIL VIEW B
Wit t e main frame set in place, attac t e Birds Nest swing assembly set to t e top beam using t e supplied fixings as illustrated above in Detail View B. As illustrated in
Detail View C, ensure t e safety c ain is installed on t e inside of t e main c ain.
NOTE: Use Loctite to prevent the fixings co ing loose
Use t e reference dimensions s own on Page 2 of LSW24BN-SPEC to ensure t e swing seats are level and positioned at t e correct eig t. If required, cut t e c ain and
re-attac to ac ieve to correct distance. Ensure all fixngs ave been tig tened and all protective caps are in place.
DETAIL VIEW C
9 6 5
4
3
96
5
POST A
POST C
POST B
POST A
POST C
POST B
POST B
8
7
9
USE 6MM D-SHACKLE TO ATTACH
SAFETY CHAIN TO MAIN CHAIN
(ENSURE SELOC PIN IS FITTED) SAFETY CHAIN ON INSIDE