Williams Piano Overture User manual

Tool required: Phillips screwdriver
Eight large screws
Two small screws Two small self-tapping screws
Check the Package Contents
Assembly
Install the Pedal Cross Bar
Headphone
Holder
A
B
B
C
A
Install the Back Board
Four large self-tapping screws
A
Sideboard (Left) Sideboard (Right)
Pedal Cross Bar
Back Board
B
C
D
Before enjoying your new Williams electronic piano, take a moment to read this simple assembly sheet.
Follow these instructions, and you’ll have your piano up and running in just a few short minutes.

Install the Headphone Holder
Plug in Pedal Cable
Screw Down the Brace Pedal Knob
(to secure Pedal Cross Bar to floor)
Plug in the Power Cord
Attach the Piano Body
AA
D
0707-7958
Piano Body
Now that the piano is fully assembled, make sure to read the enclosed user’s manual to get the most enjoyment
from your new Williams piano.