Williams MIRADA LK0480 Operating instructions

MIRADA™ LIGHT FRAME KIT
MOUNTING INSTRUCTIONS FOR 24V DC LIGHT FRAME
LK0480 / LK0640 / LK0760
250 West Laurel Street, Colton CA 92324 • WWW.WILLIAMSCOMFORT.COM • 1-888-444-1212
OWNER’S MANUAL
INSTALLATION INSTRUCTIONS
VISITEZ NOTRE SITE WEB POUR LA VERSION FRANÇAISE DE CE MANUEL
VISITE NUESTRA PÁGINA WEB PARA LA VERSIÓN EN ESPAÑOL DE ESTE MANUAL
https://www.williamscomfort.com/product/mirada-infrared-heated-mirror/
Includes:
• Light Frame
• 115 V Connection set for one LED light frame - ON/OFF/dimming operation with transformer/dimmer/
switch (CK0400)

2MIRADA HEATED MIRROR
SAFETY AND GENERAL INFORMATION
RECYCLING AND DISPOSAL
• Do not dispose of the light frame/heater or the associated components in the household waste.
• Instead, return the components to a collection point for waste electrical or electronic equipment.
• Read all instruction before use.
• In the event of improper use or use not in accordance with the intended purpose, the manufacturer accepts no
responsibility for safety or functionality.
• All electrical connections must be made by a trained and certified electrician
• The LED bulb is not replaceable.
• Remove the unit from it’s packaging and check to make sure it is in good condition before using.
• Do not let children play with parts of package (such as plastic bags).
• Check the household voltage to ensure it matches the heater’s rated specification.
• Check the power cord and plug carefully before used, to make sure that they are not damaged.
• Before unplugging the power cord, be sure to turn off the power, when energizing the unit, be sure your hands are
dry to prevent from electric shock.
• To protect against electric shock, do not immerse cord or plug in water or any other liquid.
• Connect to properly grounded outlets only.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap
(outlet/power strip).
• Do not allow cord to overhang the counter top where it can be easily pulled by children.

MIRADA HEATED MIRROR 3
Main connection side L/N
14-18 AWG
230V AC (IN)
Transformer
Wireless dimmer
Connection
cover unscrew Double socket for
connection with the light
frame 24V DC (OUT)
OPERATING UNIT TRANSFORMER TF0400
(ON/OFF /DIMM operation via voltage sink)
Double socket for
connection to the light
frame 24V DC (OUT)
Main connection side L/N
14-18 AWG
230V AC (IN)
Unscrew connection cover
OPERATING UNIT TRANSFORMER WITH DIMMER
DM0400 AND RADIO SWITCH (RS0400)
(ON/OFF /dimming operation via radio switch)
CONNECTION SCHUKO PLUG
(ON/OFF / dimming operation via radio switch)
Connect the LI00060 power cable to the transformer
(L/N) and screw the cover back on.
or
Connect wall/ceiling cable to transformer (L/N) and screw
cover back on (Caution: connection cables must be
voltage-free/connect only by a trained electrician!)
MOUNTING OF THE LIGHT FRAME KIT
The light kit is attached to the ceiling or wall
before the mirror is mounted. To do this, the holes for
heater installation must first be drilled in the ceiling/wall.
The positions of the drill holes can be found in the
operating instructions for the Mirada Heated Mirror.
Dowels and screws for the drilled holes can also inserted
at this time.
Example of ceiling mounting:
It is recommended to mount the kight kit in one of the
two suggested positions.
Peel off the foil of the adhesive strip
Attention: After one-time contact with surfaces, this will
no longer be removable!
On rough surfaces, fastening with screws and dowels is
recommended (not included). Unit hole diameter: .12“
Ceiling
Recommended position of the light kit
Operating unit
Recommended position of the light kit
Recommended position of the light kit

4MIRADA HEATED MIRROR
Attach the light kit (as shown) to the ceiling or wall according to option A or option B using the adhesive strips and
connect it to the main voltage.
If the light kit is positioned differently, please check the maximum length of the socket cable (secondary side) before-
hand and observe the (hatched) areas must be observed!
MOUNTING THE HEATER
Information on the installation of the heater can be found in the operating instructions of the respective heater!
Programming the radio switch (RS0400) with the radio dimmer:
Remove the cover on the back of the wireless switch and pull
off the safety strip between the battery and the switch. Slide
the cover back on.
Connect the operating unit to a power source
(then the programming must be completed within
15 seconds).
Briefly press the programming button on the wireless dimmer.
(Reset: press and hold the program button for 5 seconds).
Briefly press the power button on the wireless switch.
Switch and dimmer are now programmed and ready for operation.
Ceiling
Attention: The light kit must not be fixed
within the hatched area! Temperature
problems could occur!
Option A
min. 2“
Socket cable
Wireless
dimmer
Transformer
min. 2“
min. 2“
min. 2“
Option B
Safety strip
Wireless switch
(back side)
Battery
Program button of the
wireless dimmer
Wireless switch
(front side)
Heating
ca.
70 mm
Drilling holes for heating
1.
2.
3.
4.
MOUNTING OF THE LIGHT FRAME KIT

MIRADA HEATED MIRROR 5
MOUNTING AND CONNECTION OF THE
LIGHT FRAME KIT
Caution: The light kit must be disconnected from the
power supply again for the next steps.
Hanging the light frame
Connect plug
Magnets can be pivoted on this side.
Magnets are in fixed position on this side.
90°
Turn 2x/3x swiveling
magnets and place/
position frame on heater.

D113412_A 1/24
www.williamscomfort.com | 888-444-1212 | 250 West Laurel Street, Colton CA 92324 USA
Subject to change without notice | © 2023