WilTec 61288 User manual

Instruction Manual
Gas Burner/Flaming Device
61288
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.

© by WilTec Wildanger Technik GmbH Item 61288 Page 2
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: [e-mail]
Phone: [phone]
Fax: [phone]
To return your goods for exchange, repair or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [email protected]o
Phone: [phone]
Fax: [phone])

© by WilTec Wildanger Technik GmbH Item 61288 Page 3
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Use
Gas burners are suited for destroying pest plants. They are especially used for unwanted weeds to be
removed from interstices of flagstones on drives, pavements, and terraces. This is a fast and effective
alternative to manual weeding and a good choice to avoid using chemical herbicides; thus, environment
is also treated with care. Many chemical products like well-known household remedies salt and vinegar
are banned by law because of their polluting effects.
Safety instructions
•Before use, read the manual. Make sure to have understood all notes and instructions
and to be able to obey all safety warnings of this manual.
•Do not use the device near open flames or sparks. While using the gas burner,
do not smoke or use other devices. Other devices might generate flames or sparks that might
cause a fire or an explosion.
•The device may only be used outdoors. It is not suitable for indoor use.
•Neither store nor use petrol or other flammable liquids or vapours near devices oper-
ated by propane gas.
•Remove all debris (e.g., leaves or twigs) from surfaces before using the gas burner. They might
catch fire and are therefore dangerous.
•Wear appropriate protection equipment when using the burner (e.g., flame-re-
tarding gloves, protective goggles, etc.).
•Watch your feet while using the gas burner. Wear sturdy and closed shoes.
•Make sure that no children or animals are in the work area.
•Avoid using the gas burner in immediate vicinity of flammable objects and plants (keep a min.
safety distance of 50 cm). Hedges, fences, shed, and other elements could catch fire and be
damaged. Fire hazard!
•It is recommended to keep a suitable extinguishing agent at hand before beginning to work (e.g.,
a fire extinguisher, water bucket, or garden hose).
•Make sure that the hose and valves are securely screwed together.
•After use, make sure that the gas knob is completely closed.
•Never modify the flaming device or compressed gas cylinder.
•Attention! Certain parts of the flaming device can become very hot. Keep it away from
children and avoid touching the parts heated. Burning hazard!
•Never put down the flaming device during use and never leave it unattended. Make sure that
the device is completely cooled down before putting it on or near flammable material.
•Be careful not to twist the hose and avoid any overheating. Should the hose be damaged, it
must immediately be replaced.

© by WilTec Wildanger Technik GmbH Item 61288 Page 4
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
•Only use the device at an angle below 90°.
•Do not use the device during rain, wind, or other influences that complicate its use. Should the
gas flame be extinguished by wind, immediately close the gas knob.
•Should you not manage to ignite the flame several times, close the valve and wait for the gas
escaped to have dissipated before you re-try to ignite the flame.
•Should gas leak from the cylinder, this must immediately be brought to a well-ventilated place
free from sources of ignition. Make sure that all valves are closed.
Note! One can recognise escaping gas by the typical gas smell. The odorous substance added
to the propane gas is similar to the smell of rotten eggs.
Warning! Risk to your health due to gas contact! Escaping gas that is not ignited might
cause limited injuries when being inhaled or absorbed through the skin. Consult a doctor if
symptoms develop or if you have doubts.
•Only qualified persons should perform repair works. Otherwise, there is a risk of gas leaks and
other risks.
•Store the flaming device and the gas cylinder in a safe place and out of children’s reach. Make
sure that no gas escapes from cylinders. Do not store any flammable material, e.g., cardboard,
paper, or chipped wood, in the immediate vicinity of the flaming device. Make sure that the room
is well ventilated and protected from sunlight.
Attention! This burner may only be used with HD 5 propane gas. The propane gas tank should not
contain more than 20 pounds LP gas. Do not use bulk containers with bigger capacities. Do not use any
other fuel.
Important! To safely connect the burner to a current gas cylinder, you must always use a pressure
reducer that is not included in delivery.

© by WilTec Wildanger Technik GmbH Item 61288 Page 5
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Main parts
№
Name
№
Name
1
Burner
5
Handle connection
2
Gas knob
6
Cylinder connection
3
Handle
7
Hose
4
Trigger
8
Wrench
Assembly
1. Screw the burner and extension tube together. Tighten the connection with the wrench.
2. Connect the flexible hose connection with the handle and the other hose connection with the
pressure reducer.
3. After connecting the gas cylinder, make sure that its valve is closed.
4. Make sure that all gaskets are present and undamaged. Replace them if necessary.
5. Connect the device to the gas cylinder with the help of the valve and tighten the pressure re-
ducer nut with the wrench.
6. Before use, re-check all gaskets.
Operation
1. Open the valve head of the gas cylinder.
2. Slightly turn the gas knob at the handle counter-clockwise.
3. Immediately ignite the gas next to the burner with a match or lighter.
Attention! Should you not manage to ignite the flame several times, close the valve and wait
for the gas escaped to have dissipated before you re-try to ignite the flame.
4. Regulate the burning power with the help of the trigger.
5. If you wish to extinguish the flame, close the gas cylinder valve and wait for to flame to go out.
After that, close the gas knob at the handle.
Attention! Never operate the device if gaskets are damaged or missing. Only check gaskets
outdoors and with the help of leak spray or soapy water. Never search leaks with a flame.

© by WilTec Wildanger Technik GmbH Item 61288 Page 6
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Disassembly
1. Make sure that the gas cylinder valve is closed.
2. Close the gas knob at the handle.
3. Untighten the nut with the help of the wrench and disconnect the device from the gas cylinder.
Technical specifications
Dimensions
Total length (㎜)
850
Nozzle size (㎜)
60
Hose length (m)
5
Diameter of burner (㎜)
60
Length of lance (㎝)
86
Weight (㎏)
1.95
Temperature range (℃)
< 2000
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.