WilTec 61328 User manual
Operation Manual
Parts Washer/Standing Degreaser
61328
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.
© by WilTec Wildanger Technik GmbH Item 61328 Page 2
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: service@wiltec.info
Phone: +49 2403 55592-0
Fax: +49 2403 55592-15
To return your goods for exchange, repair or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [email protected]o
Phone: +49 2403 55592-0
Fax: (+49 2403 55592-15)
© by WilTec Wildanger Technik GmbH Item 61328 Page 3
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•Modifications due to technical progress can be made by the manufacturer without advance no-
tice and may not be considered yet in this user’s manual.
•Before use, check the device for completeness, functionality, and tightness.
•Never us a damaged or dysfunctional device. Contact the manufacturer or have the device
controlled by a qualified repairman.
•Always work with care and the attention required.
•Never apply excessive force when using the device.
•Fill in cleaning agent up to the level marked inside the tank.
•Do not use cleaning agents with a flashpoint below 65 ℃.
•Only use cleaning agents on petroleum base or those being biodegradable. Only cleaning
agents approved for use in electric parts washers are permitted.
•Keep children and casual bystanders away from your work zone.
•Only use the parts washer in well-ventilated rooms.
•Do not smoke near the device and do not operate it near sources of heat such as heaters, open
flames, and sparks.
•Should the parts washer begin to burn, do not try to move it. The cover, having a melting pro-
tection, closes automatically and extinguishes the fire. Never modify in any way the cover and
do not try to fix it by hand in open position.
•Only use the device with earthed mains of 230 V / 50 Hz.
•Do not perform work with this product when being tired or influenced by alcohol, drugs, or med-
icine.
•When performing any kind of work with the parts washer, wear a suitable protection clothing
such as safety gloves, safety shoes, safety goggles, etc.
•Only keep packing material (films, plastic bags, polystyrene, etc.) out of children’s, in particular
babies’ reach. Packing material hold dangers that might not be visible (e.g., risk of suffocation).
Intended use
•The device is appropriate for cleaning parts and assemblies of parts.
•The device is not suitable for use together with any cleaning agent the flashpoint of which is
below 65 ℃.
Assembly instructions
1. Remove the device from its packaging and check it for damages or missing parts.
2. Remove all parts that may be inside the device.
3. Place a clean, solid sheet of cardboard on the ground and the machine thereon. (Make sure
that the lid is closed when placing the machine onto the cardboard.)
4. Fix the four legs to their supports with the help of the M6×12 cross-head screws and M6 union
nuts. Note! Do not tighten them yet!
5. Place the lower tray between the legs with the flat surface facing upwards and fix it to the legs
with the help of the M6×12 cross-head screws and M6 union nuts.
6. Firmly press the legs against the lower tray and tighten all screws of the lower tray.
7. Tighten all screws fixed during step 4.
8. Place the machine upright. Make sure that the lid remains closed.
© by WilTec Wildanger Technik GmbH Item 61328 Page 4
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
9. Place the trays and basket into the machine.
10. Fixe the pump assembly to its lateral slot, then connect the sieve to its designated spot.
11. Connect the machine to an earthed power supply (240 V, 50 Hz). After that, fill in the correct
quantity of liquid.
Technical specifications
Total dimensions (㎝)
79 × 55 × 32
Tank dimensions (㎝)
75 × 54 × 27.4
Maximum capacity (ℓ)
75
Flow rate (ℓ⁄min)
12
Electric requirements
240 V/50 Hz/0.5 A
Power consumption (W)
26
Temperature range (℃)
0–35 (liquid)
Weight (㎏)
23
Cleaning agents
Approved cleaning agents: water/household cleaner (pH 6–8)
Warning! The pump of the parts washer can be damaged in case you use other solvents than
those stated above, e.g., methyl ethyl ketone (MEK), tetrachloroethene, or trichloroethylene.
Attention! Do not use any nitro-cellulose combination thinner!
Troubleshooting
The only problem you might meet when using the parts washer is a reduced flow rate or missing flow of
cleaning agent through the flexible hose nozzle. The most probable reason is a foreign body inside the
flexible hose.
Solution
•Check if the control lamp of the control box is lit.
•Slightly touch the upper part of the motor housing with an isolated screwdriver. A slightly oscil-
lating magnetic pull indicates that the motor is supplied.
•Disconnect the parts washer from the mains and pull out the plug. Then disconnect the flexible
hose from the discharge line to the pump.
•Remove the front part of the pump housing. Clean the zone of the impeller by removing any
foreign body.
•Re-assemble the parts washer in reversed order.
© by WilTec Wildanger Technik GmbH Item 61328 Page 7
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
№
Name
Qty.
№
Name
Qty.
1
Cover
1
21
Screen
1
2
Basket
1
22
Interrupter
1
3
Spring holder
4
23
Switch cover
1
4
Safety splint
4
24
Flexible hose
1
5
Safety plate
1
25
Lateral holder
1
6
Work plate
1
26
Pump
1
7
Tank
1
27
Pump cover
1
8
Spring washer
24
28
Filter cover
1
9
Nut
24
29
Cover
1
10
O-ring
1
30
Water intake
1
11
Drain screw
1
31
Plastic washer
1
12
Tray
1
32
Adapter
1
13
Rack
4
33
Pump bearing
1
14
Fixing screw
24
34
Filter
1
15
Nut
5
35
Gasket
1
16
Spring washer
5
36
Impeller
1
17
Screw
5
37
Gasket
2
18
Admission line
2
38
Sealing ring
1
19
Power cable and plug
1
39
Impeller holder
1
20
Pump housing
1
© by WilTec Wildanger Technik GmbH Item 61328 Page 8
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was
implemented in the German law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed-
out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the
domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung Elektro-
Altgeräte Register) under the WEEE-registration number DE45283704.
Disposal of used electrical and electronic devices (in-
tended for use in the countries of the European Union
and other European countries with a separate waste
collection system for these devices).
The symbol on the packaging or the product itself indi-
cates that this product must not be treated as normal
domestic waste but must be disposed of at a recycling
collection station for electrical and electronic waste.
By disposing of this product correctly, you contribute to
the protection of the environment and the health of your
fellow people. Inappropriate disposal threatens the en-
vironment and health.
Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by your local commune, the
municipal waste disposal facilities, or the store where you purchased the product.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
Table of contents
Other WilTec Washer manuals
