WinFast ck804k8ma series User manual

This manual is the intellectual property of Foxconn Inc. Although the
information in this manual may be changed or modified at any time,
Foxconn does not obligate itself to inform the user of these changes.
Statement:
All trademarks are the property of their respective owners.
User’s Manual V1.0 in English for CK804K8MA series motherboard.
P/N: 91-181-CK8-M1-0E
Symbol description:
Note: refers to important information that can help you to use motherboard
better.
Attention: indicates that it may damage hardware or cause data loss,
and tells you how to avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists.
More information:
If you want more information about our products, please visit the following
website: http://www.foxconnchannel.com
Version:
Trademark:

Item Checklist:
Thank for your purchasing WinFast CK804K8MA series motherboard. Please
check the package; if there are missing or damaged items, contact your distribu-
tor as soon as possible.
CK804K8MA series motherboard (x1)
WinFast Utility CD (x1)
User’s Manual (x1)
IDE Ribbon cable (x1)
FDD Ribbon cable (x1)
I/O Shield (x1)
S-ATA Signal Cable (x2)
S-ATAPower Cable (x1)
Retention Mechanism (x1)
USB 2.0 Cable (x1) (optional)

Declaration of conformity
HON HAI PRECISION INDUSTRYCOMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard
CK804K8MA
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
 EN 55022/A1: 2000 Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
 EN 61000-3-2/A14:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
 EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current <= 16A
 EN 55024/A1:2001 Information technology equipment-Immunity characteristics limits
and methods of measurement
Signature : Place / Date : TAIPEI/2004
Printed Name : James Liang Position/ Title : Assistant President

Declaration of conformity
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2004

MainFeatures .............................................................................................. 2
Motherboard Layout .................................................................................... 4
Installation Instructions
CPU.............................................................................................................. 7
Memory .......................................................................................................11
Power Supply ............................................................................................ 13
RearPanel Connectors .............................................................................. 14
OtherConnectors ...................................................................................... 16
ExpansionSlots ......................................................................................... 20
Jumpers..................................................................................................... 22
BIOS Description
EnterBIOSSetup ....................................................................................... 26
Mainmenu ................................................................................................. 26
StandardCMOSFeatures .......................................................................... 28
BIOSFeature ............................................................................................. 31
Advanced BIOS Features .......................................................................... 32
Advanced Chipset Features ...................................................................... 34
IntegratedPeripherals ................................................................................ 36
PowerManagement Setup ......................................................................... 39
PnP/PCIConfigurations............................................................................... 41
PCHealthStatus ........................................................................................ 42
Load Fail-Safe Defaults ............................................................................. 43
LoadOptimized Defaults ............................................................................ 43
Set Supervisor/User Password ................................................................. 43
Save & Exit Setup ...................................................................................... 44
ExitWithout Saving .................................................................................... 44
Table of Contents
Chapter
Chapter
Chapter
Product Introduction

DriverCD Introduction
UtilityCD content........................................................................................
Start to install drivers .................................................................................
Table of Contents
Chapter

1. Attach the CPU and heatsink using silica gel to ensure full contact.
2. It is suggested to select high-quality, certified fans in order to avoid
damage to the motherboard and CPU due to high temperature.
3. Never turn on the machine if the CPU fan is not properly installed.
4. Ensure that the DC power supply is turned off before inserting or re
moving expansion cards or other peripherals, especially when you
insert or remove a memory module. Failure to switch off the DC power
supply may result in serious damage to your system or memory
module.
Warning:
We cannot guarantee that your system will operate normally while
overclocked. Normal operation depends on the overclock capacity of
your device.
Warning:
Attention:
Since BIOS programs are upgraded from time to time, the BIOS de-
scription in this manual is just for reference. We do not guarantee that
the content of this manual will remain consistent with the actual BIOS
version at any given time in the future.
Attention:
The pictures of objects used in this manual are just for your reference.
Please refer to the physical motherboard.

This manual is suitable for motherboard of CK804K8MA series.
Each motherboard is carefully designed for the PC user who
wants diverse features.
-L with onboard 100M LAN
-K with onboard 1G LAN
-6 with 6-channel audio
-8 with 8-channel audio
-E with 1394
-S with SATA
-R with RAID
You can find PPID label on the motherboard. It indicates the
functions that the motherboard has.
For example:
On the blue mark of the PPID label, it means the
motherboard supports 6-channel Audio (-6), 1394 port (-E),
onboard 100M LAN (-L), SATA function (-S).

Chapter
Thank you for buying WinFast CK804K8MA series
motherboard. This series of motherboard is one of our new
products, and offers superior performance, reliability and
quality, at a reasonable price. This motherboard adopts the
advanced nForce4 chipset, providing users a computer plat-
form with a high integration-compatibility-performance price
ratio.
This chapter includes the following information:
Main Features
Motherboard Layout
1
1
CK804K8MA-manual-V1.0-111704.p65 2004-11-19, 14:511

Chapter 1 Product Introduction
2CK804K8MA Series User Manual
Main Features
Size:
mATX form factor of 9.6” x 9.6”
Microprocessor:
Supports AMD AthlonTM 64, AthlonTM 64FX family processors
Supports HyperTransport technology
Chipset:
nVIDIA chipset: nForce4
System Memory
Two 184-pin DDR DIMM slots
Supports PC3200/2700/2100 memory
Supports 128/256/512/1024Mb technology up to 2GB
USB 2.0 Port
Supports hot-plug
Eight USB 2.0 ports (four rear panel ports, two onboard USB headers
providing four extra ports)
Supports wake-up from S1 and S3 mode
Supports USB 2.0 protocol up to 480Mbps transmission rate
Onboard Serial ATA
150MBps transfer rate
Supports four S-ATA devices
Onboard LAN (-L/-K) (optional)
Supports10/100/1000 (-K optional) Mbps Ethernet
LAN interface built-in on board
Onboard Audio
AC’ 97 2.3 Specification Compliant
Supports S/PDIF output
Onboard Line-in jack, Microphone-in jack, Line-out jack
Supports 6-channel audio (setting via software)
CK804K8MA-manual-V1.0-111704.p65 2004-11-19, 14:512