Winston & Olive Dino Super Dome User manual

super DOMe
Congratulations! You must be the proud owner of this extraordinary play
tent! You’re just moments away from an awe-inspiring, exhilarating and
gripping journey back to an age when dinosaurs roamed the earth.
So let’s get started!
ASSEMBLY
A B
Step 1
Lay out tent, face up.
Step 2
Connect poles and slide them
through sleeves of tent (A).
Insert one end of each pole
into fabric pouch (B).
Step 3
Take other end of pole making
an arc shape and lift tent.
Insert end of pole into
corresponding fabric pouch.
Repeat process for other pole.
Step 4
Tie straps located at top of
tent around poles (C - see next
page).
CONTENT
LED lights with
remote control
6 dinosaur
toys
tent bag dome tent with roar
button attached to floor
2 tent poles

• Slide button out of pocket on tent floor and remove the plastic
battery tab at the back of the button;
• For battery replacement use 3x LR44 batteries;
• Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc), or re-chargeable batteries.
ASSEMBLY
Activate Dinosaur ROAR button
NEED MORE HELP?
Scan this QR code or use the link: www.winstonolive.com
- To download & print your Dino Discovery E-Booklet - use code DINO;
- Register your 6 month warranty;
pull tab
C
WINSTON & OLIVE CUSTOMER SERVICE PROMISE: Should you have any questions or concerns
about your dino tent, please don't hesitate to contact us at [e-mail] so we
can resolve any issues straight away.
We look forward to serving you.
Activate LED lights & remote control
• Lights require 3 x AA Batteries (not included);
• Remote Control requires 1 x CR2025 Batteries(not included);
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc),
or re-chargeable batteries.
Activate lights by pressing the ‘ON’ button while pointing at the battery pack.
Select the light mode by pressing either 1-8, see battery pack for description of these
light modes. Use timer option by selecting 4, 6 or 8H. To turn timer off press
‘TIME OFF’. Change the brightness of the lights by pressing - or + ‘DIM’ buttons.