Winter Wonder Lane Lighted Tinsel Shark Use and care manual

Lighted Tinsel Shark
Operation and Safety Instructions
- FOR INDOOR AND OUTDOOR USE -

PARTS:
Part
Description
Illustration
Qty
A
Head
1
B
Tail
1
C
Caudal Fin
1
D
Dorsal Fin
1
E
Pectoral Fin
2
F
Plastic Ties
8
G
Ground Stakes
2
To Assemble
1. Remove all the parts from the box carefully and lay out the components.
2. Insert the prongs of the Tail (B) into the corresponding rings on the Head (A).

3. Insert the prongs of the Caudal Fin (C), Dorsal Fin (D) and Pectoral Fins (E) into the
corresponding rings on assembled shark body.
4. Secure the installing points with plastic ties and secure the base to the soft ground by fully
inserting 2 stakes into the ground.
To Use

1. To illuminate, plug the power cords into a standard 120-voltAC electrical outlet.
2. To shut off, unplug the power cord from the outlet.
WARNING: To reduce the risk of fire or electric shock, if one or more bulbs do not
illuminate, replace the bulb(s) according to the "User Servicing Instructions" section of the
included "Important Safety Instructions" sheet.
Distributed By:
Big Lots Stores, Inc.
PO Box 28523
Columbus, OH
43228-0523