Wirata SP-25A User manual

Model No.
SP-25A
Output Power
5W+2Wx2(RMS)
S/N
≥75dB
Conteller
Volume/ Bass
Woofer unit
4” speaker magnetically shielded
Woofer impedance
3 Ω
Subwoofer Dimension
W150 * H207 * D200mm
Satellite Dimension
W70 * H195 * D72mm
INSTRUCTION MANUAL
Model No.:
SP-25A
Please read Instruction Manual before use
& Follow ALL the instructions carefully.

1. Front view of woofer:
2. Back view of woofer:
WHAT’S IN THE BOX
PARTS DESCRIPTION
1. Subwoofer –1set
2. Satellite –2pc
3. Input cable –1pc
4. Instruction Manual –1pc

1. Connect the satellites to the audio output jack on the rear
panel (R &L). As shown in diagram below:
2. Connect an auxiliary source to the audio input jacks in rear
panel.
3.
(1) LED will indicate that the power is on, when you turn the
switch "on" and then accordingly adjust volume to
desired level.
(2) To increase or decrease Bass, kindly use the Bass control
to set Bass level.
(3) Turn up the volume control to adjust main volume.
Notice: High volume can damage your hearing.
(4) Try with different sound equipment, e.g., VCD, DVD,
computer, CD etc.
(5) Press "mode" button to "Bluetooth" function, and open
the Bluetooth function of your phone. The Bluetooth
name is the product's model and then can connect.
HOW TO OPERATE

•High voltage inside, cannot privately.
•Keep dry, cannot expose to water or put flowerpot on speaker.
ENVIRONMENT PROTECTION
Dispose the appliance according to the local garbage
regulations.
Never throw it away to the rubbish, so you will help to the
improvement of the environment.
WARNING