Woodbridge Dreams Solid Slats User manual

WOODBRIDGE DOUBLE
BED
Solid Slats
Sleepmotion
DREAMS
Tow person
assembly
1 hour approx
assembly time
Woodbridge Double Bed - Assembly - Page 1
Sprung Slats
Solid Slats
Woodbridge Sinlge Bed - Assembly Guide - Page 1
Woodbridge Single Bed
Two person
assembly
30 minute approx
assembly time

Thank you
Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best
ever night's sleep. Before you begin building your bed, please take a moment to read through the
instructions and make sure that you've got all the relevant parts listed on the following pages.
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please visit our website
at www.dreams.co.uk/help
Safety and care
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
kept away from children and animals to prevent any risk of suocation.
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
We recommend that you build your new bed in the room you’d like it to be
located - this will help prevent any risk of damage to your newly built bed
whilst moving it.
Top tip
Woodbridge Single Bed - Assembly Guide - Page 2

Parts
Important infomation
Please identify which base you have purchased with your bed frame as the assembly method
may change. Once you have identified you have all of the relevant parts fittings, please
follow the instruction for your chosen base below;
Solid Slats Page (7)
Sprung Slats Page (8,9,10)
A
D
c
E
B
A.
Head -End 1
Parts List
B. Foot -End 1
C. Side Rails 2
D. Support Slat 1
E. Middle Legs Support 2
Woodbridge Double Bed - Assembly - Page 3
Parts
Please identify which base you have purchased with your bed frame as the assembly method may
change. Once you have identified you have all of the relevant parts and fittings, please follow the
instructions for your chosen base below;
Solid Slats Page (6)
Sprung Slats Page (7)
Important infomation
Parts
Head -End
Foot - End
Side Rails
A. 1
B. 1
C. 2
Woodbridge Single Bed - Assembly Guide - Page 3

0 1 2 3 4 5 6 7 8 9 1010 11 12 13 14 15 16 17 18
20 21 22 23 24
cm
Flathead
screwdriver
SpannerScissors Cross head
screwdriver
Tape measure
M6x45mmx 6pcs M6x20mmx6pcs Flat washer 6pcs Allen key 4mmx 2pcs
Fittings
Please check you have all the parts listed below with your product:
Tools required
Please check you have all these below:
FGH
Note: The following fitting will be found in the box which contains the Sprung Frame, NOT with the bed
frames Assembly Kit
I
Woodbridge Single Bed - Assembly Guide - Page 4

ASSEMBLY
A
D
c
E
B
I
Woodbridge Double Bed - Assembly - Page 5
ASSEMBLY
Woodbridge Single Bed - Assembly Guide - Page 5
Fix the side rails "C" to the head - end "A" and foot- end "B" .
Tighten the bolts which are pre- fitted on Head & Foot End
using allen key "I".
A
I
Use Pack:
1

Solid slat assembly
Use Pack 'X'
1
Identify the slat system you have purchased...
Standard wooden slat system.
Place the fixed wood slats onto the slat holders
on side rails "C".
Fix the slats at both ends and the middle using
bolts "F" , sleeve nuts "G", tighten with ke "I".
F
H
G
I
I
Woodbrige Double Bed - Assembly - Page 7
Solid slat assembly
Identify the slat system you have purchased...
Standard wooden slat system
Place the fixed wood slats onto the slat holders on side
rails"C".
Fix the slats at both ends and the middle using bolts "F",
sleeve nuts "G", tighten with allen key "I"
Woodbridge Single Bed - Assembly Guide - Page 6
Use Pack: GHI
1

Sprung slat assembly
Use Pack 'X'
3
Turn the metal slat frame falling upward and
carefully lower the slat frame into the bed.
Ensure that the frame sits on the guides located
on the side rails "C".
Position the slat frame so that the holes in the
side rail "C".
Position the slat frame to the side rails "C" by
threading bolt "F" through the holes in the frame
and the side rails "C".
Finally, tighten bolt "F" into the sleeve nut "G"
from the top of slats frame with allen key "I".
F
H
G
I
I
Woodbrige Double Bed - Assembly - Page 10
Sprung slat assembly
Turn the metal slat frame falling upward and carefully lower
the slat frame into the bed.
Ensure that the frame sits on the guides located on the side
rails "C"
Position the slat frame so that the holes in the side rail "C".
Secure the frame to the side rails "C" by threading bolt "F"
through the holes in the frame and the side rails "C".
Finally, tighten the bolt "F" into the sleeve nut "G" from the
top of slats frame with allen key 'I".
Woodbridge Single Bed - Assembly Guide - Page 7
Use Pack: FGHI
1

Care and maintenance
Here are some tips to keep your new bed in tip-top condition
Cleaning
To clean your new bed, we'd advise using a warm damp cloth - please do not
use abrasive chemicals or bleach as this may damage the product.
Fabric
Please note depending on the lighting, positioning and surroundings of your
room, the shade of the colour can sometimes appear slightly dierent. Over a
period of time, the colour might lighten or fade slightly due to light exposure.
Wood
Please note each of our wooden pieces are unique, meaning that markings and
shade can vary slightly between beds. Over a period of time, the wood might
lighten or fade slightly due to light exposure.
Metal
Metal tends to be more resilient to everyday wear and tear. We recommend to
gently dust your metal furniture and keep it dry to maintain its look.
Periodically we recommend you check that the screws or fixtures haven't been
become loose, over time. To move your new bed, we recommend lifting it where
possible, as dragging or pushing it could cause damage to your flooring.
Checking and moving
Thank you for shopping with us - we hope you have
a great night's sleep
Sleep we
Woodbridge Single Bed - Care and maintenance - Page 8

Little dreamers
Keep the little ones entertained while
you assemble your new purchase.