10
Cordless Limbing and Trimming Chain Saw
EN
TECHNICAL DATA
Type WG329E WG329E.5 WG329E.9 (3- designation of machinery, representative of
Jaw Saw)
WG329E WG329E.5 WG329E.9
Voltage 20V Max*
No load speed 1350/min
Guide bar length 6” (150 mm)
Oil tank capacity 30 ml
Chain pitch 1/4’’ (6.4 mm)
Chain gauge 0.05’’ (1.3 mm)
Chain speed 2.54 m/s
Number of chain links 42
Charging time 5hr approx. 1hr approx. /
Weight 3.6kg 3.2kg
* Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
NOISE AND VIBRATION DATA
A weighted sound pressure LpA = 72,2dB(A)
A weighted sound power LwA = 82dB(A)
KpA&KwA 3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value ah= 0,52m/s² ah1 = 0,46m/s²
Uncertainty K=1.5 m/s2
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING:The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
