Wulian WL-PBD-SE-60 User manual

Wireless Solar Infrared Electronic Fence User Manual
1
Copyright notation
©2011 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.
Wulian, are the trademarks and registered trademarks of
Nanjing IOT Sensor Technology Co., Ltd. The other products mentioned
in this article or company names may be the trademark or trade name of
their respective owners.
Before installing and using the products, please read user manual
carefully, which will help you use the products better.
The pictures in the manual are just for your information. If some
pictures are different from material object, the material object is final.
The content in the manual is protected by copyright law legislator. It
strictly prohibits any forms of copying, passing, distributing and storing
any content of the manual without prior, written, consent of the
instructor of Nanjing IOT Sensor Technology Co., Ltd.
When using, if the practical situation of the product is different from
that in the manual, or if you want to get more information, or you have
any questions or ideas, please contact us as below:
Service telephone: [phone]
Service website: http://www.wulian.cc/english/

Wireless Solar Infrared Electronic Fence User Manual
2
Ⅰ. Product Introduction
WL-PBD-SE-60 Wireless Solar Infrared Electronic Fence is a solar
wireless infrared electronic product based on ZigBee standard design
and it can be controlled wirelessly.
When there is an object enters IR induction zone, product can send out
alarm signal automatically to mobile intelligent terminal and let users
grasp the information at the first time and take corresponding
measures.
In addition to the smart home, WL-PBD-SE-60 can be also applied to
monitoring system, wisdom hotel, intelligent building and intelligent
hospital etc.
Ⅱ. Features
Support ZigBee HA protocol
ZigBee device type: Terminal
Solar powered, energy saving and environmental protection
Wireless communication with easy installation
Covert defense

Wireless Solar Infrared Electronic Fence User Manual
3
Overall defense in surroundings
Complete defense ability
Good anti-interference ability
Rigorous anti-destroyed ability
Can work 24/7
Ⅲ.Function illustration
Transmitting end Receiving end

Wireless Solar Infrared Electronic Fence User Manual
4
Bracket
Main body
LED light
Solar cell panel
IR area

Wireless Solar Infrared Electronic Fence User Manual
5
Ⅳ. Installation Steps
1. Rotate 90 degree for transmitter and receiver end’s IR area
respectively, load solar battery according to the picture;
Receiving end Transmitting end
Rechargeable Battery
Configuration button
of
ZigBee
network
ZigBee indicator light

Wireless Solar Infrared Electronic Fence User Manual
6
2. Seek a suitable position, fasten the bracket by screws (Picture 4.1);
3. Confirm that transmitter and receiver are in the same height and
corresponding to each other during the installation (Picture 4.2);
4. Fasten main body of the transmitter and receiver on the bracket
(Picture 4.1);
5. Mount the cover (Picture 4.1).
( Friendly remind: Network connection setup first, then mount the cover).
(Picture 4.1)

Wireless Solar Infrared Electronic Fence User Manual
7
(Picture 4.2)
Ⅴ. Application Method
1. Network Connection Setup
(1) The product should match up with WL-GW-A Wireless Gateway;

Wireless Solar Infrared Electronic Fence User Manual
8
(2) After installation, transmitting end and receiving end can check
infrared code automatically;
Receiving end
(Red【LED light】in front lens of the receiver flickers, after code
checking is completed, LED light is constant on 3 seconds and then
goes out.)
(In order to ensure the reliability, the product needs code checking
again after each alarm, repeat above process.)
When checking code, it flickers;
After checking code, it is constant
on 3 seconds and then goes out.

Wireless Solar Infrared Electronic Fence User Manual
9
(3) Quick click【Configuration button of ZigBee network】4 times to
join ZigBee network;
Receiving end
(Green【ZigBee indicator light】flickers continuously in process of ZigBee
network searching)
(After joining ZigBee network, green【ZigBee indicator light】will be on
2 seconds and then goes out.)
Continuously flicker in process of
network searching, after joining
ZigBee network, it will be on 2
seconds and then go out