wuma WDTA-120N User manual

Wireless Digital Torque Adapter
WARNING
Manual
• Directions & Accuracy : C.W. ± 1% / C.C.W. ± 1.5%
• Memory : 100 Readings
• Unit Selection : kg-m, N-m, ft.lb, in.lb
• Operating Temperature : -10℃~55℃
• Storage Temperature : -40℃~85℃
• Humidity : 0~90%
• Battery : 1.5V UM-4 (AAA) x 3
( Do not use low self-discharge battery )
• Operating Mode : Auto Reset & Track
(By Tolerance Setting)
• Warranty : 1 year in normal statement.
SPECIFICATIONS
BEFORE STARTING
PANEL
BATTERY INSTALLATION & MAINTENANCE
POWER
MAINTENCE AND STORAGE
CONTENTS
1. Before operating this torque adapter study carefully these instructions.
Main usage & application digital torque adapter is different from general torque wrench.
It is easy to operate, it reduce the requirements for the operator by install the digital display.
It is widely used for the automotive industry, machinery industry, such as bolt fastening and control.
3. Over-torquing could cause damage or lose of accuracy.
4. Keep this digital torque adapter away from magnets. If the adapter gets wet, wipe it with a dry towel soon.
The salt in seawater can damage the adapter.
5. Do not apply excessive force to the LCD screen .
6. The plastic body is not affected by petroleum products but may be damaged by some industrial solvents.
Clean it by clean cloth soaked in mineral spirits or denatured alcohol. Never immerse this adapter or any
part of it in any liquid.
1 Buzzer
2 LED indicator (Yellow)
3 LED indicator (Green)
4 LED indicator (Red)
5 LCD panel
6 Set
7 Memo
8 Plus ; Up
9 Minus ; Down
Cancel
Power
Mini-USB Communication
10
11
12
Battery
Communication
Memo
Setting
Tolerance
Direction
Values
Units
Units
Units
Units
1. Please take the battery out if you do not use product for a long time .
2. Do not mix battery types or combine used batteries with new ones.
3. Sweat, oil and so on can prevent a battery’s terminal from making
electrical contact.
To avoid this, wipe both terminals before loading a battery .
4. Dispose of batteries in a designed disposal area.
Do not throw batteries into a fire.
1. Clean this tool by wiping with a clean cloth after operation and storage in a dry environment.
Do not dip any type of liquid in this tool. This may damage the internal of this tool.
2. This tool should be recalibrated a period of 1 years, or 5,000 cycles, whichever occurs first.
To contact with local vendor, an authorized repair center for supporting.
1 Years
5000 Times
Manual
Digital torque adapter
ON
OFF
low self-discharge
UM-4 (AAA)
TORQUE
3/8”
1/2”
Paper Box
OPERATION MANUAL
Blinking
USB CONNECTION
To USB port
5
6
7
9
3
2
1
8
12
10
11
4
Blinking

EDIT PRE-SET VALUE RESET
PRECAUTIONS
100 SETS OF HISTORICAL TORQUE VALUES
DIRECTION
TRACK MODE
AUTO RESET MODE
DIMENSIONS
Notice Idle 65 Sec.
Press the Button 1 times
LCD Blinking Beep sound LED Power OFF
Press the Button 1 Sec.
Operation mode
Unit Select
Update settings into the memory
Update settings into the memory
0% : Track mode
1%~9% : Auto Reset mode
STATUS ICON DESCRIPTION
Slow Rapid
Beep speed
Torsion
Red
Green
Yellow
Over the range
Within the range
Lower then the range
Torque
Time
0
Tolerance：1%~9%
Tolerance：0%
105Nm
100Nm
95Nm
65Nm
Ex. : 100Nm±5％
Back to main screen
E-mail:[email protected]om
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : [phone]
Manufacturer Aug. 2021
01
Edition
Unit : mm
L L1
WDTA-120N
WDTA-200N
12~120 Nm / 9~90 ft-lb
20~200 Nm / 15~150 ft-lb
3/8”
1/2”
3/8”
1/2”
19
22
110
114
78.5
78.5
293.0
316.5
G
H
46
46
WB
45
45
ITEM NO. Range
AOutput
Square
Output
Square
Before using the products, please
confirm the wrench, digital torque
adapter and socket which is a mutually
vertical state, and then you can use the
wrench.
INPUT DRIVE
C.C.W.
C.W.
Also suitable for combination
wrench, ratchet handle, swivel
handle.
Select
Blinking
Blinking Blinking Blinking
Blinking Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking Blinking
Blinking
Blinking
Blinking
Tolerance
Values
Update settings into the memory
90°
L
L1
H
A
W
B