Wusic WombMusic User manual

WombMusic®
Bluetooth®Belly Speaker
User Guide
WombMusic.com
Wusic®Copyright 2021
Version: 2022.02.14

Page 2 of 24
Table of Contents
Page Contents
03 Quick Start Guide
04 Support Contact Info
05 Register –Extended Warranty
06 The Components
08 User Instructions –Belly Speaker
09 User Instructions –Silicone Gel Pad
10 Cleaning the Silicone Gel Pads
11 Cleaning the Belly Speaker
12 Belly Speaker Controller Functions
14 Pre-Loaded Music
Compatible Audio File Type
Audio File Converter Information
15 Audio File Volume or Dead Space
16 Adding or Removing Audio Files
17 Bluetooth®Pairing the Speaker
18 Important Notes to Get the Most
out of using your Belly Speaker
21 Support Contact Info
WombMusic Belly Speaker Specifications
22 Wusic Social Media
23 Other Wusic Products
24 Other Friendly Songs Products

Page 3 of 24
Using the WombMusic Belly Speaker
Welcome to the Wusic®family of products. We're
excited to be part of your growing family. This guide
will show you how to use your WombMusic Belly
Speaker to share the joy of music with your baby.
Quick Start Guide
1) Connect Belly Speaker to your source audio
Memory pulls audio from the Internal Memory
while Bluetooth®pulls audio from your
connected device.
a. Memory plays MP3 files from the memory
add/remove MP3 files to the internal memory
b. Bluetooth®connects with the audio
onyour Phone,Tablet, or other Device
2) Adjust the Belly Speaker Volume
to a comfortable level for your own ears
3) Attach Silicone Pad to Belly Speaker
and save storage case to store pads for later
4) Apply Belly Speaker to Mom’s Belly
in a comfortable location for mom
5) Enjoy Sharing the Audio with Your Baby!
Please read the user guide
fully before using for the first time
(including the Important Notes at the end)!

Page 4 of 24
Thank You for Your
WombMusic Purchase
We hope you are completely satisfied with your
WombMusic Belly Speaker.However, in the unlikely
event you are not 100% satisfied, please contact us
so we can correct the situation.
803-485-1544
[e-mail]
Support videos and product FAQs are available at:
WusicTech.com/pages/product-support
Give us our Feedback
If you are pleased with your Wusic Belly Speaker then
not only would we love to hear about it, but we would
love for you to let our other customers know how you
feel. Give us your feedback at:
www.PersonalizedReview.com

Page 5 of 24
Register Your WombMusic
Registering your WombMusic purchase provides you
free VIP support and extendsyour WombMusic
warranty to one year, so please be sure to register
using the website below.
WusicTech.com/pages/register
Benefits of Registration Include:
·Validates your WombMusic purchase
·Extends your standard 90-day warranty to
a one year warranty (from purchase date)
·Faster customer service including phone
support if you'd like us to call you to assist
·Convenient Screen Share for VIP customers.
Screen Share lets us show you how to do
something on your computer with a LIVE
connection during our phone support call.
·Special offers and discounts exclusive only
to VIP Customers
·Amazing discounts and special promotions
(sometimes free even) on new product releases

Page 6 of 24
The Components
The WombMusic Bluetooth®Belly
Speaker (WMBTBS) is designed to
play music or audio to your baby via
the built-in speaker. This is done
either by using the music stored as
MP3 audio on the internal memory
or by streaming music via Bluetooth®.
·The Speaker Side is designed to place on your
belly so your baby can hear the music or audio
·The Controls Side is used to control the speaker
functions.
·2 Audio Headphone Jacks are located at the top
of the speaker to allow you and a loved one to
listen in with the baby.
·USB Data & Charging Port is located at the
bottom of the speaker.
2 Silicone Gel Pads are included
in a reusable case.
·The Silicone Gel Pad is used
to ensure the Belly Speaker
stays in place on mom’s belly.
·The pads are made of gentle, skin-friendly,
hypoallergenic soft silicone gel which is safe
and leavesno sticky residue.
·Pads are reusable by cleaning (see instructions in
this user guide) and should last the length of your
pregnancy.
·Replacements are available at WombMusic.com

Page 7 of 24
The Components (continued)
Data/Charging USB Cable is used to add
music to, or remove music from, the Belly
Speaker using your computer. It is also
used to charge the Speaker’s battery.
Storage Gift Bag is used to keep all
of your WombMusic Belly Speaker
components neatly organized when
not in use.
Bonus Gift of Personalized Music
for Children (a $20 value) is given to
you to download one free album of
music personalized for your child.
Alert
Carefully inspect each item for signs of damage. If
any item is found to be damaged, please contact
Wusic®Customer Service immediately for assistance.

Page 8 of 24
Detailed User Instructions
Please read the full user instructions before first use!
Belly Speaker Directions
First turn on the Belly Speaker by holding the Power
button for 3 seconds. You should hear an audio
announcement of “Wusic is Turning On”.
Using the Mode button select either Memory or
Bluetooth®as your audio source. Memory will play the
MP3 audio files stored in the Belly Speaker.
Bluetooth®will play what ever audio is playing from
your connected device.
Adjust the audio level of the Belly Speaker to a
comfortable listening level. You can control the Belly
Speaker volume by using the Volume Control on the
Speaker. If you are connected via Bluetooth®, your
source device also controls the volume.
Alert
Sound travels easily within your womb so it isn’t
necessary to make the Belly Speaker loud.
The ideal Belly Speaker volume is the volume that is
comfortable for you when you hold the Belly Speaker
to your ear. If the volume is too loud for you, then it is
too loud for your baby.
If you’d like to listen with your baby, connect your own
headset to one of the two headphone connections at
the top of the speaker. Up to two headphones can be
connected.

Page 9 of 24
Silicon Gel Pad Use Directions
The Belly Speaker can be used with, or without the
silicone gel pads. If you plan to use the silicone pads
we recommend applying the pads after you’ve set-up
the speaker, made your adjustments, and are ready
for the baby to listen.
If you don’t wish to use the silicone pads, simply tuck
the Belly Speaker between your belly and your
clothing in a comfortable location. This works fine if
you don’t plan to move around much. If you plan to
get up, walk around, etc. we recommend using the
silicone gel pads to keep the speaker from moving.
To use the Belly Speaker with a silicone gel pad,
simply remove the protective film from one side of the
pad and place the pad on the speaker’s face. Then
remove the second protective film and place the
speaker on your belly in a comfortable location.
We recommend making sure your belly is clean of
lotions or oils and dry before applying the
Speaker/Pad to your belly.
The silicone gel pads are designed to last your full
pregnancy. You should not need to replace them
unless they get damaged. Replacements can be
purchased at WombMusic.com or other retailers.
If they become less sticky, they are easily cleaned.
Just follow the directions on the next page.
Go to WombMusic.com to see helpful videos to assist
you in using the Belly Speaker System.

Page 10 of 24
Cleaning the Silicone Gel Pads
The silicone gel pads are designed to be re-used
many times.
After each use we recommend placing the pad in the
included storage box until your next use.
If the pad is no longer sticking sufficiently, it is
possible some body oil or dust has gotten onto the
pad and reduced its stickiness over time. This is
easily fixed by cleaning the pads. To do so:
Step 1 - Remove the pad from the speaker.
Step 2 - Clean the pad under luke warm water by
lightly rubbing the pad with your fingers while running
water over the pad.
Step 3 - Allow the pad to air dry. After it’s fully dry,
you can return it to your storage tray, or apply it to the
face of the speaker.
If necessary you can lightly clean the pad in Step 2
above using water and mild dish soap to get the pad
even cleaner than with using just water. Do not use
heavy cleaning detergents on the silicone gel pads as
this may damage the sticky surface of the pads.
ALERT
Make sure the pad is dry of all water before applying it
to the Belly Speaker. Do not use alcohol or heavy
detergents to clean the silicone gel padssince this
would damage them.

Page 11 of 24
Cleaning Belly Speaker
We recommend cleaning the Belly Speaker with
adry soft cloth.
You can disinfect the belly speaker using alcohol
wipes and then drying with a soft dry cloth.
DO NOT USE liquids to clean the belly speaker.

Page 12 of 24
Belly Speaker Controller Functions
The WombMusic Bluetooth®Belly Speaker is
designed to be extremely easy to use either with, or
with out,the Bluetooth®features.
ALERT
Please charge the belly speaker
fully before first use.
Power On/Off - Press/hold the PWR button for
3 seconds to turn on or off. The Power LED Indicator
will be lit when the speaker is turned on.
Charging - Use the included charging cable by
connecting the USB-C end to the belly speaker and
connecting the other end to any normal USB charger.

Page 13 of 24
Controller Functions (continued)
Battery Charging Indicator - The Charging LED
Indicator will be lit when charging and will go out once
the battery is fully charged. The unit will announce when
the battery is getting low on power so that you can
connect it to the charger before it is fully depleted.
Mode Selector - Press to change the audio mode.
When first turned on it will play audio from the internal
memory. Press once to change to the Bluetooth®mode.
Press again to switch back to internal memory. The
appropriate LED indicator will be lit to correspond to the
mode that is selected.
Volume Up/Down - Pressing will increase or decrease
the audio volume for all of the audio.
Track Pause/Play - Press once to pause the current
audio track. Press again to resume play.
Track Up/Down - Pressing will switch to the next or
previous audio track.
Sleep Mode On/Off - Press once to start sleep mode.
The Sleep LED Indicator will become lit. Once activated,
the unit will continue to play music for 30 minutes and
will then turn off. Volume will automatically be decreased
during the final 4 minutes of playing time.
Headphone Jacks - Insert one or two headphones or
earbuds into either of these 3.5 mm audio jacks so that
you can listen along with your baby.
USB Jack - Insert the USB-C end of the included USB
data/charging cable into this jack for charging or data
transfer.

Page 14 of 24
Pre-Loaded Music
The WombMusic Belly Speaker comes pre-loaded
with a variety of lullaby songsfor you to enjoy with
your child. These songs are the non-personalized
version of the songs you can get
using your Bonus Music Gift Card.
FREE BONUS - Don’t forget to use
your included gift card for one FREE
album of Friendly Songs Personalized Music for your
Child! Friendly Songs has lullabies, fun playful
albums, Christian songs and Birthday songs where
your child’s name is sung throughout the songs.
Download the songs onto your Belly Speaker for your
child to enjoy!
Compatible Audio File Type
All audio files must be in the MP3 audio format to play
correctly. If the file is not in an MP3 format, the belly
speaker WILL NOT play the file.
We recommend using the free tool at Cloud Convert®
to convert your file from your current format into a
compatible MP3 format.
CloudConvert.com/audio-converter
Use These Settings
MP3 Codec, 0 Audio Qscale, 128 kbps Bit Rate

Page 15 of 24
Audio File Volume or Dead Space (Silence)
The WombMusic Belly Speaker is designed to expect
the normal settings of a Professionally Produced
Audio File, like you’d get from services like Apple
Music®, Amazon Music®, etc.
If you find that the audio file you’ve created is NOT
loud enough (or it’s too loud) then you can use the
CloudConvert tool to easily Increase or Decrease your
audio files volume and make it similar to the audio
settings of a professionally produced audio file.
Similarly, customers sometimes find that they have
too much dead space (no sound) or unwanted audio
at the beginning or end of the audio file they have
created.
The CloudConvert tool also has the ability to easily
trim either end of the audio file to make it so that the
sound that you want starts within a half second of the
beginning of the file, and the end of the file ends when
the sound that you want to keep ends.
While CloudConvert is not a studio editor, it does a
good job of easily (and for FREE) editing your audio
files to make themsound really good in the
WombMusic Belly Speaker.
And, if you get stumped or need assistance, please
contact us and we’ll be glad to help you do any of the
above tasks so you can quickly get up and running
with your belly speaker.

Page 16 of 24
Adding or Removing Audio Files
It’s easy to add, remove or change the music files
stored in the internal memory of the WombMusic Belly
Speaker. All audio files must be in the MP3 audio
format to play correctly (see Pages 14 & 15).
Watch the how-to videos on our website to show you how.
Step 1 - Turn on the Belly Speaker, put it into
Memory mode, and Pause the Audio from Playing.
Step 2 - Connect the included USB Data Cable to
your computer & the WombMusic Belly Speaker.
Step 3 - You will see the drive show up as “WUSIC” in
your computer, similar to using a flash drive.
Step 4 - At this point you can now add to, or remove
files from, the belly speaker’s internal memory.
The best way is to open two windows and put them
side by side; one with the files you have on your
computer, and one with the contents of the WUSIC
drive (the belly speaker).
Now, Drag and Drop the MP3 audio files from your
computer to the WUSIC drive. This will make a copy
of the files onto the WombMusic Belly Speaker
internal memory which can then be played.
Step 4 - “Eject” or “Remove” the WUSICdrive from
your computer before disconnecting the USB data
cable from the computer or belly speaker.
ALERT -Please keep a back-up copy of your audio
files on your computer in case of loss or damage to
the belly speaker.

Page 17 of 24
Bluetooth®Pairing the Speaker
The WombMusic Belly Speaker can be paired with
any standard audio device that supports Bluetooth®.
Step 1 - Use the Mode button on the Belly Speaker to
select the Bluetooth®mode to begin pairing the
device. The Bluetooth®LED Indicator light should be
lit indicating it’s in Bluetooth®mode. You should hear
an announcement “Wusic Bluetooth®is ready to pair”.
Step 2 - On your audio device,turn on your
Bluetooth®and then look for “WUSIC” under “Other
Devices” if it’s never been paired with your device
previously.Your device may require you to select
“Pair New Device” to turn on the Bluetooth®
discoverability.
Step 3 - Select “WUSIC” and Save. It may take a few
seconds for the pairing process to complete. You
should then hear an announcement “Wusic
Bluetooth®is now paired”.
Once the WombMusic Belly Speaker has been paired
to your device, it should discover it automatically
when both your device’s Bluetooth®is On and the
belly speaker is in Bluetooth®mode.
Step 4 - Go to your favorite music player, video player
or even social media on your device and hit “Play” in
the app. The audio from your source device will now
be heard from the Belly Speaker instead of from your
device.Use the audio from your phone call to allow
the “Grandparents” to talk to the baby. Simply call
them and then place the speaker on your belly.

Page 18 of 24
Important Notes to Get the Most
out of Using your Belly Speaker
·No Power –Press Power Button for 3 seconds to
turn on. Charge the belly speaker using the included
USB Data/Charging cable. Battery is internal only
and NOT replaceable.
·Not playing Bluetooth®Audio –Change mode to
Bluetooth®mode. Turn Off/On the Bluetooth®mode
on your source device. Make sure the source device
is paired to the Belly Speaker via Bluetooth®.
·Pad Doesn’t Stick –Clean the pad per user guide
directions and let dry. Clean your skin of all oils and
lotions before using the sticky gel pads.
·Pad is Torn/Damaged –Use the second provided
pad. Order replacement pads from WusicTech.com
·The audio files will play in alphanumeric order. If the
play order is important to you, rename the files with
a 01, 02, 03, etc at the front of the file name to
create the play order you’d like.
·To remove a file, delete it from the Belly Speakers
internal memory and it will no longer play.
·Files must be in an MP3 format to play. If the file is
not in a MP3 format, use the information on page 14
to convert the audio file to the MP3 format.
·We recommend using a bit rate of 128 kbps quality
setting (this is the same setting services like Apple
Music®or Amazon Music® use).

Page 19 of 24
Important Notes (continued)
·At a 128 kbps bit rate setting, the belly speaker
should hold about 32 hours of music (depending on
file sizes as well as other factors).
·A higher quality setting can be used but will not be
noticeable in the audio output of the belly speaker.
·You can fit significantly more music onto the belly
speaker by decreasing the quality setting of the
music. However, we do not recommend using a bit
rate any lower than 32 kbps because of the poor
sound quality of the music files. To change the bit
rate of your audio files see pages 14 & 15.
·The total amount of files added to the belly speaker
must be less than 2 Gb as this is the limit of the
memory in the belly speaker.
·The audio files sound level should be at a “normal
production level” similar to a professionally
produced song. If the sound volume is too low, use
the information on page 15 to increase the audio
files volume.
·Do not use the Belly Speaker at a volume higher
than what you’d want to hear if you placed the
speaker next to your ear.
·Always remember to first “Eject” the WUSIC drive
from your computer before you disconnect the USB
connection. This will help prevent possible file
corruption errors.
·Do not use or expose to temperatures above 110°F
or below 25°F. Do not use in wet environments.

Page 20 of 24
Important Notes (continued)
·Do not impact with hard objects. Doing so can
damage the housings, electronics, speaker or
battery.
·Do not repair or attempt to dismantle the speaker
housing. Doing so will void your warranty. If your
unit isn’t working please go to WombMusic.com and
request assistance via the customer service page.
·Wusic® is not responsible for any loss or indirect
loss due to improper use of this device. Maintain a
back-up of the audio files you may add to this
device. Please follow all of the user guide
directions.
·The WombMusic Belly Speaker System is not a
medical device and can not be used for medical
purposes and is not to be used as a substitute for
regular prenatal care by a licensed doctor.
·Stop using and consult a physician if the pads
should cause any skin irritation or if you feel any
pain. If you have silicone allergies, do not use the
pads. Do not use the belly speaker during labor.
·Wusic®expressly disclaims liability for damages of
any nature. Please consult your doctor prior to using
the WombMusic Belly Speaker or any of it's
components if you are concerned about playing
music to your baby using a belly speaker.
·Choking Hazard –Keep away from Children. Not to
be used as a toy.