Xitrix XPN-GX27165QC2 User manual

INSTRUCTION MANUAL
Please read this manual thoroughly before use and keep it handy for future reference.
XPN-GX27165QC2

2/10
1. GENERAL INFORMATION
Dear Customer,
Thank you for having purchased this product. This document describes how to install and use the LED
backlit LCD color monitor. Read this manual which contains information for correct, safe use. Keep this
manual at hand so that you can refer to it when needed.
1.1 PRODUCT DESCRIPTION AND TYPE OF USE
The LED backlit LCD color monitor presents a very rugged structure. It is designed for continuous
operation and can be used in closed circuit TV systems without risk of excessive fatigue. The Flat Panel
Display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD).
1.1.1 GENERAL FEATURES
DC 12V Power Input
Display area
DP Input video input Interface
HDMI Input video input Interface
Audio Input Interface
Multilingual OSD menu for easy setting and optimization of the display
1.2 OPENING THE BOX
Check that the packing and the contents are not visibly damaged. Contact the reseller immediately
if parts are either missing or damaged. Do not attempt to use the device in this case. Send the product
back in its original packing if it is damaged.
1.2.1 CONTENTS OF THE BOX
Monitor
Power Adapter
Power cable
DP cable
User’s manual
Important Note: Accessories may be changed without prior notice.
1.3 WARNINGS
1.3.1 POWER
Only use the power unit provided to power the device. Check mains rating before
plugging the power unit in.
Do not pull the cable to unplug the device.
1.3.2 SAFETY PRECAUTIONS

3/10
Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not
introduce material (solid or liquid) inside. If this should accidentally occur, disconnect the device from the
mains and have it inspected by qualified personnel.
Never open the device. In all cases, contact the qualified personnel or authorized service
center for repairs.
Keep the device away from children, to prevent accidental damage.
Do not touch the device with wet hands to prevent electrical shock or mechanical
damage.
Do not use the device if it should fall or the external casing is damaged. Risk of
electrocution if the device is used in such conditions. Contact the reseller or your installer.
It is advisable to disconnect the power wire if the monitor is not used for an extended
period.
1.3.3 INSTALLATION PRECAUTIONS
To prevent overheating the device, arrange it in a position allowing the flow of air through the
slots in the casing. Ensure at least 5 cm of free space when installing inside a rack. For the same reason,
do not install sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not
install in areas subject to excessive dust, mechanical vibrations or shocks.
Do not arrange this device on an unstable surface, such as a tottering or slanted table.
The device could fall causing injury or mechanical failures.
Do not install the device in a place where it could be exposed to humidity or water. Do not
direct a jet of water onto the device: risk of fire, electrocution or mechanical failure.
Stop using the device if water or other material should penetrate inside: risk of fire and
electrocution. Contact the retailer or authorized installer.
Slots and openings in the cabinet are provided for ventilation. These openings must not be
blocked or covered.
Do not place heavy or heat generating objects on top of the device: this could damage the
casing and/or increase internal temperature causing faults.
Do not cover the device with a cloth while it is running to prevent deforming the external
casing and overheating the internal parts: risk of fire, electrocution and mechanical failure.
Keep magnets and magnetized objects away from the device to prevent faults.
Do not use the device in the presence of smoke, vapor, humidity, dust or intense vibrations.
Wait for a while before operating a device immediately after transporting it from a cold place to
a warm place and vice versa. Wait on average for three hours: this will allow the device to adapt to the
new ambient temperature and/or humidity, etc.
The monitor is provided with a plastic base and rubber feet. It can be positioned on a horizontal
surface, such as a desk or a table. Make sure that the device is fastened firmly and that it is not resting on
unstable supports or surfaces. Dropping could cause severe injury and damage the device.
Remember to adjust the brightness and contrast to obtain a perfect image.
The monitor can also be installed on the wall by means of a bracket (not provided).
1.3.4 CLEANING THE DEVICE
Rub delicately with a dry cloth to remove dust and dirt.
Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
Do not use volatile liquids (such a petrol, alcohol, solvents, etc.) or chemically treated cloths
to clean the device to prevent deformation, deterioration or scratches to the paint finish.
1.3.5 PRIVACY AND COPYRIGHT
The monitor is a device for CCTV systems. Recording of images is subject to the laws in force
in your country. Recording of images protected by copyright is forbidden.
Product users shall be responsible for checking and respecting all local rules and regulations
concerning monitoring and recording video signals. The manufacturer SHALL NOT BE LIABLE for use of
this product not in compliance with the laws in force.

4/10
2. INTERFACES, CONTROLS & SETTINGS
DC 12V
DP1
HDMI1
HDMI2
DP2
AUDIO OUT
5
6
User manual Power supply Power cable DP cable
PACKAGE INCLUDES
Accessories
65

5/10
Controls&Se�ng
VIDEO SOURCE SELECTION BUTTON
To select the desired signal ("Auto Select","DP1,DP2.HDMI1,HDMI2",) press the button"+" and"-" to select the
desired item. Press the button "MENU" to confirm.
DP1
HDMI1
HDMI2
DP2
1. POWER
UP
Press the middle button to boot, and then clickto enter the menu option mode.
2.
3.
Change the value on selected menu/Switch a menu on OSD.
4.
DOWN
Change the value on selected menu/ Switch a menu on OSD.
LEFT
Change the value on selected menu/ Switch a menu on OSD.
Change the value on selected menu/ Switch a menu on OSD.
5. RIGHT

6/10
OSD MENU
A . View Mode
Standard
Enter standard mode.
Game
The game mode is divided into FPS1,FPS2,RTS,Night,
Vision,Gamer1, Gamer2, Gamer3.
Movie
Enter movie mode.
Web
Enter web mode.
Text
Enter text mode.
B . Manual Image Adjust
View
Mode Manual lmage Adjust
Standard
Game
Movie
Web
Text
Game Off 2560X1440@165Hz
Color
Adjust Audio Adjust Input Select Setup Menu
View
Mode Manual lmage Adjust
Sharpness
Blue Light Filter
Advanced DCR
Response Time
MPRT
Game Off 2560X1440@165Hz
Color
Adjust Audio Adjust Input Select Setup Menu
Sharpness
Change the sharpness from 0 to 100.
Blue Light Filter
Change the display blue light from 0 to 100.
Aspect Rao
Change the image aspect raon to 4:3, 5:4,16:9,16:10.
Advanced DCR
Turn the Dynamic Contrast Rao Feature On or Off.
Response Time
Change the response me to low,middle,high.
Adapve-Sync
Turn the Adapve-Sync feature On or Off.
MPRT
Turn the MPRT feature On or Off.

7/10
Volume
Change the audio volume from 0 to 100.
Mute
Turn the Mute On or Off.
C . Color Adjust
D . Audio Adjust
View
Mode Manual lmage Adjust
Contrast/Brightness
Color Temperature
Color Range
HDR
Game Off 2560X1440@165Hz
Color
Adjust Audio Adjust Input Select Setup Menu
View
Mode Manual lmage Adjust
Volume
Mute
Game Off 1920X1080@280Hz
Color
Adjust Audio Adjust Input Select Setup Menu
Contrast/Brightness
Adjust the display brightness and contrast value
from 0 to 100.
Color Temperature
Change the color temperature to cool, standard,
warm, user.
Color Range
Change the Color Range to Auto,Full Range,Limited Range.
HDR
Turn the HDR On or Off.

8/10
E . Input Select
F. Setup Menu
View
Mode Manual lmage Adjust
DP1
HDMI1
HDMI2
DP2
Game Off 2560X1440@165Hz
Color
Adjust Audio Adjust Input Select Setup Menu
View
Mode Manual lmage Adjust
Language Select
OSD Size
OSD Timeout
OSD Background
LED Effect
Auto Power Off
Sleep
Auto Detect
Reset
Game Off 2560X1440@165Hz
Color
Adjust Audio Adjust Input Select Setup Menu
Swith the signal input to DP1,HDMI1,HDMI2,DP2.
Language Select
Change the OSD Menu display language.
Resoluon Noce
Turn the Resoluon Noce feature On or Off.
Informaon
Resoluon: 2560x1440 Horizontal frequency:
213.3Khz Vercal frequency: 144.0 Clock
frequency: 580.1MHz.
OSD Size
Change the OSD size to nave or large.
OSD Timeout
Change the OSD Timeout from 0 to 100.
OSD Background
Turn the OSD Background feature On or Off.
LED Effect
Turn the LED effect feature On or Off.
Auto Power Off
Turn the Auto Power Off feature On or Off.
Sleep
Change the sleep me to 30, 45, 60, 120, off.
Auto Detect
Turn the Auto Detect feature On or Off.
Reset
Restore factory default seng.

HDMI*2
9/10
4.SPECIFICATION
Important Note: The specification may be changed without prior notice.
Size & Type 27”
LCD
Panel Type 27” LED Backlit Monitor
Panel Dot pitch 0.2331(H) ×0.2331(V)
Brightness (Max) 300cd/m2
Contrast Ratio 3000:1 (Typ.)
Display Color 16.7 Million Colors
Viewing Angle R/L: 89°/89°U/D: 89/89°
Response Time 25ms
Resolution 2560(H) *1440(V)
Case Type Black Plastic
Active Display Area 596.736(W)×335.664(H)
Aspect Ratio 16:9
Color Temperature
Medium
Warm
User
Cool
Operating Humidity 5-90% RH
INTERFACE
DP*2
Electrical Ratings 12V DC, 5A (AC 100-240V, 50/ 60 Hz)
Power Consumption ≤34W
Accessories HDMI cable, Power Supply & Cable, User’s Manual, Screws, table stand

Email us: [email protected]