XL displays Centro Slatwall User manual

www.xldisplays.co.uk
01733 511 030
Assembly Instructions
Centro Slatwall
2
Affix upper post to lower post by
positioning and rotate until assembly drops
into position, female end centrally over
male fitting (C), continue rotating
clockwise through 90º to secure (D).
A
1
B
Place base plate on the floor, position lower post
centrally over male fitting of base plate (A), and rotate
until assembly drops into position, continue rotating
clockwise through 90º to secure (B).
CD90º
3
Slot clamps of 750mm
profile into post channels
and tighten grub screws
with hex key supplied to
secure.

www.xldisplays.co.uk
01733 511 030
Assembly Instructions
Centro Slatwall
4
Arc and slot rigid footer panel into
innermost channels of posts, and
lower into channel of horizontal
profile assembly.
5
Slot first slatwall panel into
innermost channels of post,
ensuring ‘C’ shaped channel is
lowermost. Slide down posts and
onto footer panel. Repeat for
second slatwall panel.
6
Slot clamps of middle 750mm
profile into post channels and slide
profile onto top of slatwall panel.
Tighten grub screws with hex key
supplied to secure.

www.xldisplays.co.uk
01733 511 030
Centro Slatwall
Assembly Instructions
7
Slot final three
slatwall panels
into posts.
8
Slot clamps of top 750mm
profile into post channels
and slide profile onto top
of slatwall panel. Tighten
grub screws with hex key
supplied to
complete assembly.