XM Warrior G1SA User manual

Quick Start Guide
Warrior G1SA
Thank you for purchasing the Full HD Warrior sports action camera. The
Warrior camera can be mounted with the Bike & Helmet Kit or the Board Kit for
the ultimate adventure HD recording experience.
Getting to know your Warrior camera
✔Warrior camera is a Professional, High Quality Digital Video
Recorder that records in Full HD video by using a simple button
operation.
✔It also has the latest Mega Pixel Sensor for you to take great digital
photographs.
✔Your camera can capture color video & picture in low illumination (for
Warrior G1S only).
✔Your camera has a MicroSD card slot(up to 32GB), which allows you
to take video in 1080p@30fps for about 6～12 Hours according to image
quality and bit rate.
✔The embedded 3400mAh Lithium-ion Battery can last for 6 Hours,
standby for 12 months and be recharged quickly.
✔The Waterproof Housing lets the camera perform up to 5 meters under
water.
✔Warrior camera is light than 5.2 ounces or 145g.

1. Getting to Know Your Camera

1
Main Button
Photo/Video/Power
1. Turn the camera on
2. Take single photograph by short-press
3. Take video by long-press
2
LED Indicator
Show the camera status
Flashing green once: Take a photo
Flashing green continuously: Recording video
Always green: Camera turn on
No light: Camera turn off
Flashing blue continuously: WiFi turn on
Flashing red continuously after power off: Remote control pending
3
WiFi & Remote
control
Turn WiFi on/off by long-press
Turn remote control on/off by short-press
4
Lens
High quality lens
5
USB Port
1. Connect to computer for data transfer
2. Charge your camera
6
SD card slot
Insert Micro SD card, up to 32GB
7
LED indicator
Camera charging status
Red: camera is charging
Green: charging finished
8
Reset Button
Restore to factory default setting
9
WiFi Antenna
Extend WiFi distance
2.Using Your Camera
2.1 Charging up Your Camera
Open the back cover, charge your camera with the USB cable and DC 5V/2A
or 5V/1A adapter. The red LED lights up to indicate the camera is charging and
turns green as soon as the camera has been fully charged. It takes about
5hours to fully charge the camera.
2.2 Power on/off Your Camera
Power on: The Warrior camera can startup within 1 second by short-press
main button ; If the Warrior camera is already mandatory power off, press
main button and WiFi button at the same time to mandatory
power on.

Power off: The Warrior camera can be automatically power off after 30
seconds if no recording video, you can also mandatory power off by pressing
main button and WiFi button at the same time. ( you can setup
Auto Power off time by Home7 App, MainMenu->Setting->General Setting)
2.3 Recording Video
Long-press the main button to start / close recording video, default
resolution and frames is 1080p@30fps.
If you want to change video resolution and frames, please follow below steps:
1. Open WiFi and connect to mobile phone
2. Open Home7 App
3. Change the camera resolution(1080p & 720p) in the main menu or frames
by slow motion(720p@60fps & 1024*576@120fps)
Notes
1. Default video compression is H.264 and video format is mp4. If you want to
use H.265 video compression to save 40% more storage space, please go
to Home7 App->MainMenu->Setting->Encode Configuration, then the
video format will be H.265 and only can be played by H.265 player like
VLC.
2. Changing video resolution and compression are disabled during video
recording.
3. Default recording mode of the Warrior camera is Stop Recording after
memories are fully filled. You can also change it into Loop Recording through
Home7 App(MainMenu->Setting->Memory)
2.4 Taking Photos
1. Short-press the main button
Notes
Change photo resolution and shot mode(Single shot, Burst Mode, Time Lapse
and Countdown) through main menu of Home7 App.

3. Connecting Your Camera
3.1 Connecting Your camera to iOS or Android App
1. Open the Warrior camera WiFi,long-press the WiFi button at back.
2. Mobile phone search and connect with WiFi hotspot(default name is
xmjp_spt_xxxx)
3. Open Home7 App, then you can see the realtime video.
Notes
It requires iOS 7.4 and Android 4.0 version or above
Home7 App
iOS Android
3.2 Connecting Your camera to a PC
1. Connect your camera to a PC via the USB cable included.
2. Turn on the Warrior camera, make sure WiFi, remote control and recording
video are all OFF.
3. Find and Open the "NO NAME" folder.
4. You can see all video files here by date.
photo: Photos of Single, Burst ,Time lapse and Countdown mode.
video: Mp4 video file, which can be played by most of video players. If the
camera record in H.265 format, then the video file is H.265 format and only can
be played by H.265 player like VLC.
xm_video: H.264 video file, only can be played by H.264 player.
Notes
1. If you cannot find "NO NAME" folder, unplug the cable from PC and connect
the PC again, then turn the camera on.
2. H.265 video compression could save 40% more storage space than H.264,
default video compression is H.264, you can select H.265 at Home7
App->MainMenu->Setting->Encode Configuration

4. Specification
Model
Warrior G1SA
Sensor
2 Mega Pixel Sony Starlight CMOS sensor
Lens
165°ultra wide angle field of view
Video
1080p@30fps
720p@60fps
720p@30fps
1024*576@120fps
Photo
Resolution: 2 Mega Pixel in JPEG format
Capture Modes: Single,Burst,Time lapse,Countdown
Audio
Built-in high quality microphone
Storage
Up to 32GB, Average Recording time: about 12 hours
(SD card not included)
Connection
USB2.0 (for data connection and battery charging)
Power
Built-in 3400mAh Rechargeable Lithium-ion Battery
Battery Life: Approx. 6 hours
Housing
High quality ABS
Waterproof up to 16 feet / 5 meters
Dimension
4.53x1.73x1.73 inch
Weight
5.2 ounces(145g)
*Settings can be changed through Home7 App.
FAQ
1. Does this camera record audio?
Yes, the camera has microphone on top of the housing.
2. How to live view my camera in mobile phone?
Long-press WiFi button at back, then mobile phone search and connect
with WiFi hotspot xmjp_spt_xxxx, open Home7 App to live view.
3. How to power off the camera?
The camera will automatically power off after 30 seconds(factory default
setting), you can also mandatory power off by pressing main button
and WiFi button at the same time, in this case, you have to mandatory
power on in the same way.
4. How to download photos and videos to my phone and share to
Facebook,Twitter,Whatsapp etc…
First, your mobile phone need to connect with the camera by WiFi, open
the photo and share, download the video and press it to share.
5. What’s meaning of red LED flashing when recording?

Battery has no enough power or Memory card is fully filled.
6. Why the camera’s LED is red after power off?
Because remote control function is pending, you need to close remote
control function through short-pressing WiFi button.
7. How to reset to factory default setting?
Pressing reset button at back until hearing a voice.
Cautions
1. Do not leave the camera in places where the temperature may rise
significantly such as inside a car.
This may adversely affect the case or the parts inside.
2. The camera is a precision instrument. Do not drop, strike, or use
excessive force when handling the camera.
This may cause damage to the camera
3. Before you move the camera, disconnect USB cable.
Failure to do this may damage USB cable.
4. This is a sports action video product.
Please be careful when using the product, take care not to fall on the
camera as this may cause bodily injury.
5. There are no user serviceable parts for the camera: DO NOT
DISSASSEMBLE!
For repair, please call our customer services team for assistance.
6. Do not place the camera on unstable surfaces.
This may cause the camera to fall or tilt over, causing damage.

FCC STATEMENT
IMPORTANT INFORMATION
FCC ID: 2AEP6XM-JPG1-2
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.