XPOtool 62811 User manual

Operation Manual
Electric Brush Cutter
62811
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.XPOtool.com Item 62811 Page 2
The Tool Experts
01 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 62811 Page 3
The Tool Experts
01 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Signs and symbols
Warning: This device can potentially be dangerous. Carelessness or improper use may
lead to severe injuries and even cause death.
Familiarise yourself with this operation manual before operating the device.
Ensure to wear safety glasses to protect your eyes.
Ensure to wear ear protection to protect yourself against noise.
Always make sure to wear certificated safety gloves.
Immediately disconnect the device from its power source in case the cable should be dam-
aged.
Do not expose the device to rain or other sources of water and avoid using it in environ-
ments with high levels of moisture. Water permeating the device will damage it and greatly
increase the risk of electric shock.
Tool with protection class 2
In accordance with the essential applicable safety standards of European directives.
Keep this manual safe and make sure that it is always accessible. This operation manual contains
important information concerning safety, operation, maintenance, and storage of this product. Carefully
read all the information and familiarise yourself with the device before using it.
Warning! When handling the device, always abide by the information and instructions contained within
the operation manual of its respective accessory. Non-compliance may cause property damage as well
as severe injuries and may even lead to death.
Note that this operation manual cannot possibly cover all the potential scenarios that could occur while
working with this device. Therefore, make sure to be careful, attentive and to use the device with dis-
cernment.
Upon receipt, the device should be removed from its package and checked for completeness.

https://www.XPOtool.com Item 62811 Page 4
The Tool Experts
01 2022-1
Intended use
This device has been designed for the sole purpose of cutting and trimming brushes and hedges. Any
use deviating from this may cause damage to the device as well as its surroundings and may lead to
severe injuries. This device must not be used by children or individuals with reduced physical, sensory,
or mental capabilities, or lack of experience and/or knowledge. Adolescents over the age of 16 may use
the device if they have received instructions concerning the use of the device from and are being super-
vised by a person familiar with the product and responsible for their safety. Children must be always
supervised to ensure that they do not play with it.
Safety instructions
Workplace safety
•Always keep your working area clean and well-lit. Cluttered or insufficiently lit working areas
increase the risk of accident.
•Do not operate the device in explosive environments or near flammable substances, liquids,
gases, or dusts. The use of this device may create sparks that could potentially ignite gases or
dust.
•Keep bystanders away from the working area while operating the device, as distractions may
lead to a loss of control.
•Always make sure to abide by local laws and regulations concerning the use of power tools.
Electric safety
•The power plug of the device must match the power socket and must not be altered in any way.
Matching sockets and original plugs minimise the risk of electric shock.
•Do not use adapter plugs with earthed power tools.
•Avoid physical contact with earthed objects and surfaces such as pipes, stoves, or refrigerators.
An earthed body increases the risk of electric shock, when working with a power tool.
•Do not use the device if it cannot be turned on or off properly.
•Always turn the device off and remove it from its power source if it is not being used.
•Do not pull at the power cord of the device and do not abuse it to lift, carry, or hold the device.
•Do not expose the power cord to heat, oil, sharp edges or moving parts and make sure it is not
bent or pinched. Damaged or entangled cables greatly increase the risk of electric shock.
•Always check the cable for signs of damage or wear before using the device. Do not use the
tool if its power cord or plug are damaged and make sure to have it replaced by a qualified
electrician before the device is operated again. Damaged or worn cables must not be repaired
and must instead be replaced by a qualified electrician.
•When using the device outside, make sure to use an appropriate extension cord suitable for
outdoor use to decrease the risk of electric shock.
•The use of the device in wet environments (e.g., rain) is strictly prohibited. If the use of the
device within an environment with high moisture levels cannot be avoided, make sure to equip
it with a fault-current circuit breaker to decrease the risk of electric shock.
•Repairs and in-depth maintenance must be performed by qualified personnel and spare parts
used must at least be of equal quality and authorised by the manufacturer to guarantee a proper
and safe operation.
•Do under no circumstances attempt to modify the device, its accessories, or its power plug.
Modified devices are dangerous and their use carries a great risk of accidents and electric
shock.
Personal safety
•Always stay alert and do not use this device while being tired or exhausted or under the influ-
ence of alcohol, drugs, or medicine.

https://www.XPOtool.com Item 62811 Page 5
The Tool Experts
01 2022-1
•Take all necessary precautions to prevent an accidental operation of the device. Do not push
the trigger when carrying the device and make sure it has been turned off, before connecting it
to a power supply. A loss of control can lead to property damage and severe injuries.
•Always wear appropriate protective gear including, but not limited to safety goggles, ear protec-
tion, safety gloves, and non-skid safety shoes when operating the device.
•Ensure that all adjusting tools or wrenches have been removed from the device before switching
it on. Adjusting tools might get caught up in moving parts and cause damage to the device as
well as severe injuries.
•Do not overreach and always ensure a safe stand.
•Always make sure to treat power tools with care, to keep them clean, sharp, and in pristine
condition by performing maintenance on a regular basis to ensure a proper functionality. Sharp
and clean tools are easier and safer to handle while poorly maintained tools increase the risk of
accidents.
•Make sure that moving parts can move without any kind of obstruction before starting the device.
•Only use tools for their intended purpose and always operate them at a speed appropriate for
them. Forcing a tool decreases its efficiency and increases the risk of accidents.
•Always store the device in a dry and safe place inaccessible to children and unauthorised indi-
viduals.
Special safety information concerning brush cutters
•Ensure to check the integrity of the device before every use. Damaged or worn power tools
must not be operated as their condition greatly affects their performance and safety. Have dam-
aged parts repaired or replaced by a qualified electrician and do not use the device unless it is
in pristine condition.
•Do not leave this device unattended.
•Keep all parts of the body away from the cutting blades. Do under no circumstances attempt to
remove cuttings from the blade or hold material that is to be cut while the device is running.
Cuttings should only be removed after the device has been turned off and if it is ensured that it
cannot be started by accident.
•Only use this device for its intended purpose and always operate it at a speed appropriate for
it. Do not use this device to mow lawns or shred organic components for composting.
•Only carry the device by its handle and only while its blades are not moving. If storing or trans-
porting the device, make sure to secure the blades with the appropriate protective cover.
•Only use the insulated gripping surfaces to hold and operate the device, since its blades and
metallic parts might make contact with hidden current sources or its own power cord. Making
contact with a live power source involves the risk of electric shock.
•Always make sure to keep cables away from the blades of the device. Keep track of the power
cord of the device as well as nearby cables to avoid cutting them by accident.
Safety of maintenance
•Repair and in-depth maintenance work always must be performed by qualified personnel to
ensure a proper and secure operation.
•Before cleaning the device or performing repair and maintenance work, always make sure to
turn the device off and to disconnect it from its power supply.
•Allow the device to cool down before beginning any kind of cleaning, repair, or maintenance
work to minimise the risk of injury.
•Only use wet and clean pieces of cloth or a brush to avoid damaging the device while cleaning
it. Do not use solvents, detergents, or other chemical substances to clean the device.
•Air inlets and outlets should always be kept clean to ensure that air flow us unobstructed.
•Make sure to clean the device and its blades after every single use.
•Regularly lubricate the blades of the device.
Safety of storage
•Always store the device in a secure and dry environment inaccessible to children.
•Make sure to secure the blades of the device with the protective cover before storing the device.

https://www.XPOtool.com Item 62811 Page 6
The Tool Experts
01 2022-1
•Clean the device before storing it for longer periods of time and also clean it after it has been
stored for longer periods of time.
Main components
№
Name
№
Name
1
Protective blade cover
5
Rear handle with trigger
2
Blades
6
Cable holder
3
Hand guard
7
Power plug
4
Front handle with trigger
8
Fastening screw
Scope of delivery
Please check the content of the package upon arrival to ensure that the following items are included
and in pristine condition. Please contact us in case of missing or damaged contents:
•Electrical hedge trimmer
•Protective blade cover
•Hand guard
•Operation manual
Use
1. First place the hand guard (3) in the designated grooves located below the front handle (4) and
safely attach it with help of the fastening screw (8).
Attention: The device must not be used without the hand guard (3) being safely attached.
2. Connect the device to a suitable wall outlet or extension cord.
3. Simultaneously press the front handle trigger (4) and rear handle trigger (5) to start the device.
4. To stop the movement of the blades, simply release one of the two triggers (4 or 5).
Use notes
•Before the trimming of the hedge can begin, ensure to cut all branches exceeding a diameter of
16 mm with hedge shears.
•It is recommended to work on hedges in a trapezoidal manner as this cutting technique complies
with the natural growth of the hedge and prevents the lower branches from being thinned out
too much.

https://www.XPOtool.com Item 62811 Page 7
The Tool Experts
01 2022-1
•It is further recommended to begin by cutting the edges of the hedge. Thereby move the device
from the bottom to the top before tending to the upper part of the hedge and shaping.
•Immediately turn the device off if its blades should jam or be obstructed by clippings. Disconnect
the device from its power source before checking the condition of the blades and potentially
removing stuck clippings.
•Ensure that the blades of the device do not come into contact with metal as they might otherwise
be damaged in the process.
•Further make sure to always be aware of the location of the power cord of the device and safely
keep it behind you. It is recommended to plan work in a manner that leads away from the power
outlet. Use the cable holder of the device to ensure a secure placement of the power cord.
Specifications
Power supply
230 V, 50 Hz
Idling speed (r⁄min)
1.700
Input power (W)
520
Noise level (dB (A))
105
Cutting length (㎜)
450
Max. cutting diameter (㎜)
16

https://www.XPOtool.com Item 62811 Page 8
The Tool Experts
01 2022-1
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE-
registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European Un-
ion and other European countries with a separate col-
lection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equipment.
By contributing to the correct disposal of this article you
protect the environment and the health of your fellow
men. Environment and health are threatened by inap-
propriate disposal.
Material recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local community, municipal waste
disposal facilities, or the store where you purchased the article.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.