XPOtool 60312 User manual

User’s manual
Commercial Tin Can Opener
60312
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.XPOtool.com Item 60312 Page 2
The Tool Experts
04 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 60312 Page 3
The Tool Experts
04 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•Only use the device according to the intended use defined in this manual. Every incorrect use
might lead to injuries and damages.
•Only use the device on a level surface.
•Keep the device away from children. Do not leave children unattended when they are near the
device.
•Never open cans that are under pressure.
•Avoid any contact with the knife. Risk of injuries!
•Never open cans that contain flammable goods (e.g., lighter fuel).
•Keep clothes, hair, and jewellery away from moving parts. Risk of injuries!
•Never remove or shift the knife.
•The device must not be operated if damaged or functionally impaired. If possible, ask a compe-
tent person to repair it.
•Thoroughly clean the device after every use. Risk of damages to persons’ health due to
lacking hygiene!
•To clean the device, never use abrasives, caustics, hard brushes, etc.
•Never reach for the can or lid during operation.
•Do not touch the lid cut off and the can opened directly at the edges cut.
•Pay attention when removing the cut off lid from the opener! The lid will turn as soon as pressure
is applied.
•Keep your fingers, hair, jewellery, and clothes away from the rotating knife.
•Pay special attention when cleaning the knife. It is very sharp.
•No responsibility is accepted for damage caused by improper maintenance or use.
Description
Thanks to its simple and quick operation as well as its robust design (cutting knife made of hardened
steel/casing made of cast iron), the opener is suitable for both private and commercial use. The variable
height allows the user to simply open quite large cans such as sausage cans.

https://www.XPOtool.com Item 60312 Page 4
The Tool Experts
04 2022-1
Operation
1
2
3
1. Before using the opener for the first time, clamp its base to a table or worktop using the screw
clamp, then place the can that you wish to open onto the base.
With the handle put in vertical position, there is a gap between the cutting knife and body. The
can must be placed so that the body can move downwards, allowing the knife to bore itself into
the top part of the can and to cut an opening.
2. Now put the handle to horizontal position until the cutting knife is seated in the can, then turn it
to the right. The can will turn as well until its top part is smoothly cut off. Make sure that the lid,
once lifted, does not fall into the can.
3. Now put the handle to vertical position and remove the open can.
Note: After use, let the handle in the upright position so that the spring remains untightened and
the device serves longer without problems.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.