xtra e-fusion User manual

DEAR CUSTOMER,
Thank you for purchasing our product e-FUSION Bluetooth
speaker, please read this instruction manual carefully, before use.
Our company does not accept any responsibility for physical
damage caused by improper use or products which have been
damaged by negligence or willful actions
SAFETY GUIDE
When used in the directed manner, this unit has been designed
and manufactured to ensure your personal safety. However,
improper use can result in potential electrical shock or fire
hazards. Please Read all safety and operating instructions
carefully before installation and use, and keep these instructions
handy for future reference.
WARNING: To prevent any risk of fire or electrical hazard, do not
open or replacement any parts by yourself, if the product is
damaged, please contact qualified service personnel or
designated repair center.

1. Water and Moisture: The unit should not be used water. For
example: near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement
2. Objects and Liquid Entry: Care should be taken so that objects
do not fall and liquids are not spilled into any openings or vents
located on the product.
3. Heat: The unit should be placed away from heat sources such
as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
4. Placement: Placing your product on a stable surface is
advisable for better sound quality.
5. Avoid: Do not keep any hard substance on the product. This will
damage the top keys & may affect the performance of the product.
6. Force: While pressing the buttons on the top, avoid applying
force.
7. Cleaning: The unit should be cleaned only using a warm damp
cloth. Do not use solvents, etc.

PACKING LIST
Accessory:
e-FUSION Speaker - 1 unit
USB Charging Cable - 1 unit
3.5mm Signal Cable - 1 unit
Instruction Manual
SPECIFICATION
Built-in Battery voltage: 3.7 V
Battery Capacity: 1800 mAh
Charging voltage: DC 5V 500mA
Speaker driver: 4Ω3W*2+BASS
Frequency response: 100Hz~16 KHz
S/N Ratio: 75dB
Distortion: 0.5%
Product size: L 220 * W 70 * H 45 mm

OPERATING INSTRUCTION
1. BLUETOOTH MODE:
Turn on the power switch located on the back-side of the speaker.
A Blue light will flash in the front and XTRA BT Speaker (e-
FUSION) will automatically enter pairing mode. Search the device
from a Bluetooth enabled Cell Phone & pair rightfully.
When paired the Blue light will stop flashing & will be stagnant.
This indicates device connected. Bluetooth connectivity is
established after the blue light stops flashing, and the music starts
playing.
e-FUSION (some mobile phone need to enter password, the
original password is 0000 depending on the version of mobile
phone or other Bluetooth Audio transmitter device)
Press for once to play the previous or next music track.
Press Long to adjust volume of music.
Press for once to play or pause music
Press Long to recall recent call
Press for once to refuse or to hang up the call
Press Mto change modes i.e. Bluetooth mode, TF Card mode,
USB mode, FM mode.

2. PLUG ‘N’ PLAY MUSIC:
e-FUSION has another best feature i.e. Plug ‘n’ Play. Take a USB
Pendrive and plug it into the USB port. The speaker automatically
detects the pendrive and will start reading it.
Now you can enjoy your favorite Playlist on the go anywhere,
anytime
3. TF Card Mode
Please insert TF card, Bluetooth mode gets disconnected (if not
connected to any device). e-FUSION automatically detects and
read the TF card. TF card mode is automatically turned on. That’s
it, now enjoy your music.
4. AUX CABLE MODE
Inset 3.5mm audio plug into the 3.5 mm jack of e-FUSION, it
automatically detects the AUX audio signal and mode is
automatically set to AUX input mode. The other end of AUX cable
you can insert into audio jack of PC, Laptop or any other devices
and enjoy your playlist.

FUNCTIONAL FEATURES
1. High capacity polymer lithium battery, standard USB charging
port.
2. Advanced intelligent decoding, can support for external audio
devices such as MP3 players.
3. Noble metals NdFeB strong driver speaker, 3D digital Dynamic
Bass engine technology, and the sound quality is super shocking
5. FM MODE
Insert the USB charging cable or insert 3.5mm AUX cable to
charge the FM Antenna, press the mode button (M) to enter FM
mode.
Press button for 5 seconds to enter FM into search state. FM
automatically search the available FM station, wait until search is
completed.
Single press or to select station one by one and enjoy
the FM radio.

Notice:
The first time you use the product, required special USB cable to
charge long time (not less than 3 hours)