Xtreme Power 95513 User manual

IMPORTANT SAFEGUARDS
Gas: When installing or using the gas stove, please pay attention to
whether the gas source is the same as the gas source of the gas stove you
purchased.;
Ventilation: The gas stove should be installed in a well ventilated place, but
should avoid strong wind blowing;
Fire prevention: Flammable and explosive materials shall not be placed
around the stove, and the stove shall not be used to dry towels, clothes,
etc.;
Anti-scald: After using or just turning off the fire, the rack, burner and
other parts are still very hot, please avoid touching then with your hands;
Keep away from children to avoid accidents;
The stove is hot when using. When using the stove, avoid putting heating
units on the stove. Metal objects such as knives, forks, spoons, lids, etc.,
should not be placed on the stove because they can be heated;
When the stove and hose leak, the air reaches a certain level, it is easy to
cause an explosion. At this time, please do not use any electrical appliances.
Immediately close the propane tank valve, open windows and doors to
keep ventilate, check the leak position after the gas is exhausted. And
contact the seller maintenance department in time;
If there is something wrong about the sotve, it must be solved by
professional technicians.
INSTRUCTION MANUAL
95513 Deluxe Glass Top Gas Stainless Steel Stove

CONSTRUCTION OF STOVE
OPERATION
1. Slowly open propane tank valve;
2. Press the Range Knob and turn it counterclockwise to the 90 degree “ON”
position. When you hear a click, observe the fire. If it is already lit,
continue to press the Range Knob for 3-4 seconds before letting your hands
out. If the fire goes out after letting hands out. Please repeat the above
ignition method;
.
3. When the knob is turned to the 90 degree position, the firepower is the
maximum. You can continue to adjust the firepower counterclockwise or
clockwise.
4. Turn the Range Knob to "OFF " position, and you can extinguish the fire.
NOTES:
CONNECTING NEW GAS SOURCE OR STOVE HAS NOT BEEN USED
FORALONG TIME, THERE MAY BE AIR INSDE THE HOSE. YOU
MAY NOT IGNITE THE STOVEAT THE FIRST TIME. AT THIS TIME,
THE OPERATION CAN BE REPEATED TILLAIR INSDIE THE HOLE
IS EXHAUSTED. NEVER PUT THE HEAD CLOSE TO THE BURNER
WHEN IGNITION TO AVOID ACCIDENTS.
HOW TO HANDLE ABNORMALSITUATION
Abnormal Situation
Reasons
You can try to
Ignition Problem
Gas tank valve is closed
Open Gas tank valve
Hose is blocked or out of
shape
Clean the hose and make it
with normal shape, or
change new hose
Air inside the hose
Repeating ignition till air
inside the hose is exhausted
No gas insdie the gas tank
Change the new gas tank
Gas leaking
Hose isn’t connected well
or broken
Re-connect the hose or
change new hose
Range Knob is not in OFF
position
Put the Range Knob in
OFF position