Xtrend ET8000 Setup guide
How to set TV model
1. TV model set-up 1 (Enter TV brand codes)
a. Press and for 3 seconds, then the LED of turns bright.
b. When LED of turns bright. Enter TV brand codes with reference to the TV brand
list.
(If there are many codes, repeat the entering TV brand codes until TV turns off.)
c. If TV turns off, Press
d. LED of blinks 3 times after successful implementation.
2. TV model set-up 2 (Auto search)
a. Press and for 3 seconds, then the LED of turns bright.
b. When LED of turning bright. Press keys until TV turns off.
c. If TV turns off, Press
d. LED of blinks 3 times after completed.
3. TV model set-up 3 (ID Recall)
a. Press and for 3 seconds, then the LED of turns bright.
b. While LED of turns on, press , then the stored TV brand code stored on
the remote control unit can be confirmed once the LED of starts to blink.
Example)
“0 “–LED of blink 10 times quickly.
“1 “–LED of blink once slowly.
“2 “–LED of blink 2 times slowly.
“9 “–LED of blink 9 times slowly.
