YachtSafe G31 User manual

YachtSafe GPS Alarm Manual
G31 & G32
N 30 32.89’
E 114 18.04’
Version 2018 l VETEL AB [e-mail] lwww.yachtsafe.se lGothenburg l Sweden

Installation of the alarm unit
Glass Plastic Wood
1. Mount the alarm unit standing vertically or lying
horizontally according to the picture. The GPS signal
passes normally through wood, plastic and glass but
not solid metal. Try to place the alarm unit in an open
environment to get a strong GPS signal. The GPS
signal also gets stronger with fewer layers of materials.
If the alarm is used in a metal boat the alarm unit
should be placed close to a window. Also note that
computers and transformer may jam the GPS signal.
If you don’t get any GPS reception with the app, or if
the app often shows an old position, then the alarm
unit has to be moved. However, note that it may take
several hours to get the GPS position for the rst time
when the alarm is new.
2. Connect the alarm unit to a voltage source (red cable
= positive, black cable = ground). See more information
below regarding the white cable.
+ 12 / 24volt (GPS alarm version HW003):
White conductor output extends to ground when
active. Load max 3A at the output, it will turn o at high
load / current. Fuse the feed to the load. If load current
exceeds 1A, a relay on output between output and load
should be used.When connecting a siren, red cable goes
to red and black cable to the white on the G32.
Red conductor, fuse alarm, 3A.
Black leader, ground. Out 0V
+12/24 VDC
0V/Ground
Connect fuse,
see info above
Technical specications
Size:
Weight:
Temperature:
External supply (VDC):
Power consumption:
GSM/GPS antennas:
GSM band:
Internal battery:
Enclosure:
Tracking time on
internal battery:
Alarm detection on
internal battery:
Additions or adjustments to this manual can be found at
www.yachtsafe.se under the Manuals tab.
74x48x28 mm
150 g
-30 to +70°C*
12-24 V
2 or 7 mA
built-in
850/900/1800/1900
2 Ah
IP68
up to 2 weeks
up to 3 months
(Up to 3 months applies when activating low power function.
The function is set via the remote control. Please note: when
the alarm is set to low power mode, it is not possible to com-
municate with the alarm via the app or by SMS commands. The
alarm returns to normal mode in case of Sabotage or Movement
alarm and an SMS will be sent to the alarm receiver.)

Enter country code fol-
lowed by your phone
number.
Enter the information
about your alarm and
press Save in the top right
corner.
Enter the phone numbers
to contact when the alarm
is triggered and press
Update in the top right
corner.
Activation is complete!
Registration and activation
Thank you for purchasing a YachtSafe GPS
Tracker! First of all you have to register the
alarm and buy the GSM-traffic app.
Please visit our website, www.yachtsafe.eu.
1. Click on the Register alarm tab in the
top menu. Register your product by
filling out the form. Be sure to fill in all
fields with an asterisk (*) correctly.
2. When registration is done:
Click on the: Administer Alarm tab.
Login with the alarm’s serial no. and
your e-mail address. After login – Click
on Web Shop to buy GSM-traffic. You
will receive an order confirmation of
your purchase. Then please wait until you
receive another e-mail including your
alarm’s phone number and PIN code (this
e-mail will arrive within 24 hours).
3. Download the app from App Store or
Google Play Store and follow the steps
shown in the screenshots for iOS and
Android in this manual.
iOS instructions
Android instructions

Accessories and settings
IMAGE 1 Select Alarm accessories & Relay
IMAGE 2 Add & congure accessories
IMAGE 3 iOS:New accessory
Android: Choose alarm accessory
IMAGE 4 Choose the accessory to connect.
Enter a name for the accessory and
then press Connect and follow the
instructions.
iOS: After connection of the
accessory, go to the tab Alarm ac-
cessories & Relay, press Update in
the top right. Choose to activate/
Inactivate the alarm accessory
by the button Edit in the top left.
Choose your setttings and press
Save.
Android: After connection of the
Alarm Accessory, go to the tab
Alarm accessories & Relay, press
Update. Choose to activate/inac-
tivate the alarm accessory by the
symbol in the top right (press
Edit). Choose your settings and
press Save.
iOS instructions
Android instructions
IMAGE 1 IMAGE 2 IMAGE 3 IMAGE 4

Control your alarm by SMS
SMS coMMand
Pin ALARM On/O
Pin CONFIGURE NewPin
AlarmNumber1
(AlarmNumber2)
Pin GPS (NEXT)
Pin OUT NotUsed/
On/O/Siren
Pin SHUTDOWN
Pin STATUS
PIN VOLTAGE TRIGGER
TriggLevel/O
deScription
Activate/Deactivate burglary and
intrusion alarm.
Congure the alarm unit with one or
two alarm receivers and possibly also a
new PIN code..
Read current GPS position with map
link. The parameter NEXT can be used
when there is poor GPS coverage, then
the alarm unit does not respond until a
new position is available.
Activate/deactivate output or use it as
a siren (only YachtSafe Boat Alarm).
The alarm unit shuts down after the
external power supply is disconnected.
Read status information like battery
voltage, etc.
Activate/Deactivate monitoring of the
external driving voltage. Trigger level
must be in steps of 0.1V (for example
110 = 11.0 volts).
SMS usage
Communicate with the alarm
Note that the alarm unit needs to be connected to a voltage
source. SMS commands are sent from a regular mobile phone
to the alarm’s phone number. All commands begin with the
alarm unit’s four-digit PIN, space, and then the name of the SMS
command.
For example: 1111 gps or 1111 status
All SMS commands are answered with an SMS from the alarm
device.