YachtSafe G31 User manual
Manual
YachtSafe GPS-alarm G31, G32 & G33
1. Mount the alarm unit standing vertically or lying horizontally
according to the picture. The GPS-signal passes normally through
wood, plastic and glass but not solid metal. Try to place the alarm
unit in an open environment to get a strong GPS-signal. The
GPS-signal also gets stronger with fewer layers of materials. If the
alarm is used in a metal boat the alarm unit should then be placed
close to an window. Also note that computers and transformer
may jam the GPS-signal. If you don’t get any GPS-reception with
the app, or if the app often shows an old position, then the alarm
unit has to be moved. However, note that it can take some
hours to get the GPS-position for the rst time
when the alarm is new.
Installation of the alarm unit
2. Connect the alarm unit to a
voltage source (red cable = Plus,
black cable = ground). G33 has
a different cable and has to be
installed by an authorized tter.
The white cable (The output of the
alarm) goes to ground when it’s
active. With installation of a siren
red cable goes to red and black
cable the white on G32.
Out 0V
8-29VDC
0V/Ground
Connect fuse 3A
Technical specication
Size:
Weight:
Temperature:
External supply (VDC):
Power consumption:
GSM/GPS antennas:
GSM band:
Internal battery:
Enclosure:
Tracking time on internal battery:
Alarm detection time in low power
consumption mode:
74x48x28 mm
150 g
-30 to +70 °C*
9-28 V
2 or 7 mA
built-in
850/900/1800/1900
2 Ah
IP68
up to 3 weeks
up to 6 weeks
*The GSM-function is working from -20°C to +55°C
Glass Plastic Wood
wireless alarm and control solutions
R
Version 01 l VETEL AB linfo@vetel.se lwww.yachtsafe.se lGothenburg l Sweden
N 30 32.89’
E 114 18.04’
1. Download the Yachtsafe app &
add your cell phone number
Open up App Store and search for the
YachtSafe app. Download it for free. First of
all you need to add your cell phone number
according to the pictures to the right
2a. Add an alarm you have registered on the web
Click on the plus button in the upper right corner. Add all required
information. You should have received the Pin code and Alarm
phone number in an email or on the website after you registrated
the alarm. Number means the alarm phone number. (Don’t
mix this up with you own cell phone number)
1. Click on Settings in the upper left corner.
3. Add an alarm name of your choice. It’s easy
to change this later. Then choose OK and ll out
the online registration form. You nd the serial
number on the sticker in the upper right corner
on the next page.
iPhone
2b. Registrate your alarm with
help of the app
2. Then choose Register new alarm to continue.
Registration and activation
First of all you have to register the alarm and buy GSM-trac. You do this easily on our website, www.
yachtsafe.se, by choosing Register Alarm in the top menue. It’s also easy to do this directly in your app and
all the alarm information will then be added automatically. If the registration is done with a computer you
have to add all the alarm information manually. Note that you don’t need to have the app to use the alarm
because you can SMS communication. See back page for more information about this.
3. Add cell phone numbers that
should receive alarms
1. Click on Status in the bottom of the app.
2. Scroll down and choose Alarm settings.
3. Addthecellphonenumbersthatyouwish
to receive alarms.
wireless alarm and control solutions
R
Version 01 l VETEL AB linfo@vetel.se lwww.yachtsafe.se lGothenburg l Sweden
1. Download the Yachtsafe app & add your cell
phone number
Open up Google Play and search for the YachtSafe app. Down-
load it for free. First of all you need to add your cell phone
number according to the pictures to the right
2a. Add an alarm you have registered on the web
Click on the menu button on the Android phone to see the
“box of alternatives”. Chose then New Alarm Prole och add
the information. You should have received the Pin code and
Alarm phone number in an email or on the website after you
registered the the alarm. Number means the alarm phone
number. (Don’t mix this up with you own cell phone number).
1. Click on the menu button on the Android
phone to see the “box of alternatives”. Then
choose More.
3. Add an alarm name of your choice. It’s easy
to change this later. Then choose OK and ll out
the online registration form. You nd the serial
number on the sticker in the upper right corner
on this page.
Android
2b. Registrate your alarm with
help of the app
2. Choose Register your alarm.
3. Add cell phone numbers that should receive
alarms
1. Choose Alarm Settings in the“box of alternatives”.
2. Add the cell phone numbers that you wish to receive alarms.
wireless alarm and control solutions
R
Version 01 l VETEL AB linfo@vetel.se lwww.yachtsafe.se lGothenburg l Sweden
You nd a sticker here on the
manual that you got together with
the alarm. The information is used
during the registration.
wireless alarm and control solutions
R
Version 01 l VETEL AB linfo@vetel.se lwww.yachtsafe.se lGothenburg l Sweden
SMS communication
Set the cell phone number to be alarmed
To activate the alarm you have to send the folowing SMS to the telephone
number of the alarm:
Pin Congure Pin Alarm number1 (Alarm number 2)
Note that the alarm unit needs to be connected to a voltage source
to be able to communicate with it. You see an example to the right
about how
Communicate with the alarm
SMS-commands are sent from cell phones to the telephone number
of the alarm unit. All commands start with the alarm unit’s four numbered
pincode, space and the name of the SMS-command. One or several
parameters separated by space may also follow. Uppercase or lowercase
letters can be mixed. All SMS-commands respond with an SMS from
the alarm unit.
Description
Activate/Deactivate theft- and burglary protection.
Congure the alarmunitwithone ortwo alarm receivers and
eventually new pincode.
Read current GPS-position with map link.The parameter
NEXT can be used when there is bad GPS-coverage, then the
alarm unit does not respond until a new position is available.
Activate/deactivate output or use it as a siren (only YachtSafe
Boat Alarm).
The alarm unit shuts down after the external power supply is
disconnected.
Read status information like battery voltage, etc.
Activate/Deactivate monitoring of the external driving volt-
age. Trigger level must be in step of 0.1V (for example 110 =
11.0 volt).
SMS commands
Pin ALARM On/O
Pin CONFIGURE NewPin AlarmNumber1 (AlarmNumber2)
Pin GPS (NEXT)
Pin OUT NotUsed/On/O/Siren
Pin SHUTDOWN
Pin STATUS
PIN VOLTAGE TRIGGER TriggLevel/O
Summary of all SMS commands
See website for further information about SMS communication
This manual suits for next models
2
Table of contents
Other YachtSafe GPS manuals
