Yada BT532925 User manual

User Manual
Important, retain for future reference:
Read carefully
BT532925
CAR BABY CAMERA
WITH APP CONTROLLED

2
QUICK INSTALLATION GUIDE
1. Mount the Car Baby Camera
Before you begin... Gather these items.
Option 1 Option 2
1 2 3 4
11
3
4

3
2. Connect to Power
2
1

4
PRODUCT SPECIFICATIONS
2.4 GHz
FHD 1080P
FOV(H) 137.4°
14°F~122°F (-10°C~50°C)
DC 5V (USB-C)
33 Feet / 10 Meters
(without interference or obstruction)
Frequency:
Camera Resolution:
Camera Viewing Angle:
Operating Temperature:
Operating Voltage:
Maximum Signal Range:
Please read all of the installation instructions carefully before installing
the product. Improper installation will void manufacturer’s warranty. The
installation instructions do not apply to all types of vehicles, and are
written as guidelines to assist in installing the system.
Consult an experienced technician if you are not comfortable installing
the product. You can also contact YADA at 1.866.294.9244 to speak
to one of our installation specialists if you have any specific questions
regarding the Car Baby Camera with APP Controlled.
BEFORE using the Car Baby Camera with APP Controlled,
please read the safety information provided in this user manual.
ALWAYS use the product as outlined in this user manual.
Please make sure to read and understand all local laws and regulations
regarding cameras and their use in a vehicle. Laws vary by state.
INTRODUCTION

5
1. 1 x Car Baby Camera
2. 1 x 9.8 feet / 3 meters USB-C Cable
3. 1 x Spring Loaded Clamp
4. 1 x Headrest Mount with Straps
5. 1 x User Manual & Quick Installation Guide
PACKAGE CONTENTS
21
3 4 5

6
PRODUCT OVERVIEW
1. Light Sensor
2. LED Indicator
3. Camera Lens
4. USB-C Power Port
1
3
2
4

7
CAMERA DIMENSIONS
INSTALLATION
3.56” / 90.6 mm1.23” / 31.45 mm
1.65”
/ 42.1 mm
We recommend placing the camera at a spot where it can capture your
baby’s entire car seat so you can monitor him/her at all times. However,
for safety measures, please make sure that the camera is not placed
anywhere near the airbag. Please see next page for some installation
options:

8
Option 1: Headrest Mount with Straps
Attach the camera mount to the headrest of your seat using Headrest
Mount with Straps. Secure the mount by pulling both the vertical and the
horizontal straps until they are tight and stable. The rotating knob on the
mount can be used to adjust the angle of the mount.

9
Option 2: Spring Loaded Clamp
Attach the Spring Loaded Clamp mount onto the metal pole under your
headrest, and then attach the camera to the mount. The rotating knob on
the mount can be used to adjust the angle of the mount.

10
CONNECT TO POWER
Connect the camera to any USB port on your vehicle using the USB-C
Power Cable included in the box. To ensure maximum safety, we recommend
tucking the cable under the seat lining, the floor mat, or anything that’ll
prevent the cable from getting into your way. The camera will power on
automatically every time you start your vehicle.
NOTES:
If your vehicle does not come with a USB port, you may use the 12/24V
power socket (“cigarette lighter”) as power source. (Adapter need to be
purchased separately)
In order to make sure the camera can function properly, please make sure
the USB port on your vehicle can provide at least 1A power supply.