Yamaha DV-C6480 - Progressive-Scan DVD Player User manual

(Q)I
I~
000 0
76
70
00c0
OWNER'S MANUAL
(Q)I
I~
000 0
76
70
00c0
OWNER'S MANUAL

IMPORTANT SAFETY INSTRUCTIONS
•Explanation of Graphical Symbols
IMPORTANT
Please record the serial number of this unit in the space
below.
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accor-
dance with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves,
or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. Apolarized plug has two blades with
one wider than the other. Agrounding type plug has two
blades and athird grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, &)
bracket, or table specified by the manufac-
turer, or sold with the apparatus. When a
cart is used, use caution when moving the .
cart/apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing
is required when the apparatus has been
damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled
or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
The exclamation point within an equilateral
triangle is intended to alert you
to the presence
of important operating and maintenance
(servicing) instructions
in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR
MOISTURE.
& &
'------------'
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to
alert you to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute arisk of electric shock
to persons.
MODEL:
Serial No.:
The serial number
is located on the rear of the unit.
Retain this Owner's Manual
in asafe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSETHIS UNITTO RAIN OR
MOISTURE.
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
•Explanation of Graphical Symbols
IMPORTANT
Please record the serial number of this unit in the space
below.
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accor-
dance with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves,
or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. Apolarized plug has two blades with
one wider than the other. Agrounding type plug has two
blades and athird grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, &)
bracket, or table specified by the manufac-
turer, or sold with the apparatus. When a
cart is used, use caution when moving the .
cart/apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing
is required when the apparatus has been
damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled
or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
The exclamation point within an equilateral
triangle is intended to alert you
to the presence
of important operating and maintenance
(servicing) instructions
in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR
MOISTURE.
& &
'------------'
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to
alert you to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute arisk of electric shock
to persons.
MODEL:
Serial No.:
The serial number
is located on the rear of the unit.
Retain this Owner's Manual
in asafe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSETHIS UNITTO RAIN OR
MOISTURE.
CAUTION

IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFYTHIS UNIT! Compliance with FCC regulations does not guarantee
This product, when installed as indicated
in the that interference will not occur
in all installations. If
instructions contained
in this manual, meets FCC this product is found to be the source of interference,
requirements. Modifications not expressly approved by which can be determined by turning the unit "OFF"
Yamaha may void your authority, granted by the FCC, to and "ON", please try to eliminate the problem by using
use the product. one of the following measures:
2. IMPORTANT: When connecting this product to Relocate either this product or the device that is being
accessories and/or another product use only high affected by the interference.
quality shielded cables. Cable/s supplied with this
product
MUST be used. Follow all installation instruc- Utilize power outlets that are on different branch
tions. Failure to follow instructions could void your FCC (circuit breaker or fuse) circuits or install
AC line filter/
authorization to use this product
in the USA.
s.
3. NOTE: This product has been tested and found to
In the case of radio or TV interference, relocate/
comply with the requirements listed
in FCC Regula- reorient the antenna. If the antenna lead-in is 300
tions, Part
15 for Class "8" digital devices. Compliance ohm ribbon lead, change the lead-in to coaxial type
with these requirements provides areasonable level of cable.
assurance that your use of this product
in aresidential
environment will not result
in harmful interference with If these corrective measures do not produce satisfac-
other electronic devices. tory results, please contact the local retailer autho-
This equipment generates/uses radio frequencies and, rized to distribute this type of product. If you can not
locate the appropriate retailer, please contact Yamaha
if not installed and used according to the instructions Electronics Corp., U.S.A. 6660 Orangethorpe Ave,
found
in the users manual, may cause interference Buena Park,
CA 90620.
harmful to the operation of other electronic
devices.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
We Want You Listening For ALifetime
YAMAHA and the Electronic Industries Association's
Consumer Electronics Group want you to get the most out of
your equipment by playing it at asafe
level. One that lets the
sound come through loud and clear without annoying blaring
or distortion -and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association's Consumer
Electronics Group recommend you
to avoid
prolonged exposure from excessive volume
levels.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
1J.4:::::r2d~L __ ---:E:::O:::'''''~~----(1A;;;us;;;;t;;;;ra;;;;lia~mOO'') I
et.:.mllN - ~':5lBU AltO ,I M ffll5l8:.E iASEll AADtAJIJI< WHEN ot>l!Ii
A'it-llD:l'ClSUl'lE11JllE.aN.
VAIWlNG <SYJUlOOl/El.Wllll'lNUGlA!lEllStllAt.MNGNilAOEHHA
DOL AR PfrMo 3Tll4EN M HIlA
V.4l!C! ,wUTAeM OllT ALrntU. PWmIAUf JA ; Tal
PI\IXI'MA'WMA'..lS USER5AlH.YI.\.i Au.;(AWl "T~
VA?;t<I!'£l,SYNo.IG{\C}t'EUBlO5YNlIGl.ASE;lS~No\IlO£I;lI(I;DE,"
1Jl~1l£!1tAI(:t..L.!srIlkiN
VO!'lSlCI(f'SiCHf8AAlU%()!OOU'Il!llSO!TIWlI:U5€IlS~
WENNASDfCKIlNDOEl:JFl'MT '«:HTDEMSTlWlc4l.'SSHU"
AmNf1llt.I·
IWMt1CN V51liU: n ;' 00 ''''':ISIill' LOFtSQl..l L'''UAJl9l
lSI O'~T MTU rovli ~'OON AU ~M'J(;IEA:J
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFYTHIS UNIT! Compliance with FCC regulations does not guarantee
This product, when installed as indicated
in the that interference will not occur
in all installations. If
instructions contained
in this manual, meets FCC this product is found to be the source of interference,
requirements. Modifications not expressly approved by which can be determined by turning the unit "OFF"
Yamaha may void your authority, granted by the FCC, to and "ON", please try to eliminate the problem by using
use the product. one of the following measures:
2. IMPORTANT: When connecting this product to Relocate either this product or the device that is being
accessories and/or another product use only high affected by the interference.
quality shielded cables. Cable/s supplied with this
product
MUST be used. Follow all installation instruc- Utilize power outlets that are on different branch
tions. Failure to follow instructions could void your FCC (circuit breaker or fuse) circuits or install
AC line filter/
authorization to use this product
in the USA.
s.
3. NOTE: This product has been tested and found to
In the case of radio or TV interference, relocate/
comply with the requirements listed
in FCC Regula- reorient the antenna. If the antenna lead-in is 300
tions, Part
15 for Class "8" digital devices. Compliance ohm ribbon lead, change the lead-in to coaxial type
with these requirements provides areasonable level of cable.
assurance that your use of this product
in aresidential
environment will not result
in harmful interference with If these corrective measures do not produce satisfac-
other electronic devices. tory results, please contact the local retailer autho-
This equipment generates/uses radio frequencies and, rized to distribute this type of product. If you can not
locate the appropriate retailer, please contact Yamaha
if not installed and used according to the instructions Electronics Corp., U.S.A. 6660 Orangethorpe Ave,
found
in the users manual, may cause interference Buena Park,
CA 90620.
harmful to the operation of other electronic
devices.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
We Want You Listening For ALifetime
YAMAHA and the Electronic Industries Association's
Consumer Electronics Group want you to get the most out of
your equipment by playing it at asafe
level. One that lets the
sound come through loud and clear without annoying blaring
or distortion -and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association's Consumer
Electronics Group recommend you
to avoid
prolonged exposure from excessive volume
levels.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
1J.4:::::r2d~L __ ---:E:::O:::'''''~~----(1A;;;us;;;;t;;;;ra;;;;lia~mOO'') I
et.:.mllN - ~':5lBU AltO ,I M ffll5l8:.E iASEll AADtAJIJI< WHEN ot>l!Ii
A'it-llD:l'ClSUl'lE11JllE.aN.
VAIWlNG <SYJUlOOl/El.Wllll'lNUGlA!lEllStllAt.MNGNilAOEHHA
DOL AR PfrMo 3Tll4EN M HIlA
V.4l!C! ,wUTAeM OllT ALrntU. PWmIAUf JA ; Tal
PI\IXI'MA'WMA'..lS USER5AlH.YI.\.i Au.;(AWl "T~
VA?;t<I!'£l,SYNo.IG{\C}t'EUBlO5YNlIGl.ASE;lS~No\IlO£I;lI(I;DE,"
1Jl~1l£!1tAI(:t..L.!srIlkiN
VO!'lSlCI(f'SiCHf8AAlU%()!OOU'Il!llSO!TIWlI:U5€IlS~
WENNASDfCKIlNDOEl:JFl'MT '«:HTDEMSTlWlc4l.'SSHU"
AmNf1llt.I·
IWMt1CN V51liU: n ;' 00 ''''':ISIill' LOFtSQl..l L'''UAJl9l
lSI O'~T MTU rovli ~'OON AU ~M'J(;IEA:J
CAUTION

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this
manual carefully. Keep it
in asafe place for future
reference.
2Install this unit in awell ventilated, cool, dry, and clean
place with at least 5cm
above, behind and on the both
sides of this unit -away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
3Position this unit away from other electrical appliances,
motors and transformers to avoid humming sounds, do
not place this unit where it may get exposed to rain or
any kind of liquid to prevent fire or electrical shock.
4Avoid extreme temperature swings or
excessive use of
humidifier
in the room where this unit is installed to
prevent condensation inside this unit, which may cause
an electrical shock, fire damage to this unit, and/or
personal injury.
5
Do not cover this unit with anewspaper, atablecloth, a
curtain, etc.
in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit and/or personal injury.
6 Avoid installing this unit in aplace where foreign objects
and liquid might fall.
It might cause afire, damage to this
unit and/or personal injury.
Do not place the following
objects on this unit:
•Other components, as they may cause damage and/or
discoloration on the surface of this unit.
•Burning objects (I.e., candles), as they may cause fire,
damage to this unit and/or personal injury.
•Containers with liquid in them, as they may cause an
electrical shock to the user and/or damage to this unit.
7
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
S
Do not use force on switches, controls or connection
cables.
Never pull the cables when disconnecting them.
9Only voltage specified on this unit must be used. Using
this unit with ahigher voltage than specified is dangerous
and may result
in fire or other accidents. YAMAHA will not
be held responsible for any damage resulting from the
use of this unit with avoltage other than that specified.
10 Do not attempt to clean this unit with chemical solvents;
this might damage the finish. Use aclean, dry cloth.
11 Disconnect the power cord from the wall outlet when not
planning to use this unit for along period of time, or
during
an electrical storm, as they may cause damage by
lightning.
12 Do not attempt to modify or fix this unit. Contact the
qualified YAMAHA service personnel when any service is
needed. Cabinet should never
be opened for any
reasons.
13 Be sure to read 'TROUBLESHOOTING' section
regarding common operating errors before concluding
that this unit is faulty.
CAUTION
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
DANGER
Visible laser radiation when open. Avoid direct exposure to
beam.
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings
to look into inside.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class
1.
This unit is designed for home use only. Do not use this unit
for business purposes.
Be sure to place this unit on alevel surface. If not so, this
unit will fail to work normally at the PLAYXCHANGE
operation and cause damage to the disc(s) and this unit itself.
Caution for moving this unit
•When moving this unit, first remove all discs from the disc
table and close the table by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the front panel display indicates as follows.
:>2 3 4 5
Never switch off the power if the front panel display is not
pictured as above, otherwise the unitwill break down
during moving because the internal mechanism is not
locked.
•When
moving this unit, be sure to first disconnect the
power cord from the
AC outlet and disconnect all cords
connecting this unit to other equipment.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class Bdigital apparatus complies with Canadian
ICES-003.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this
manual carefully. Keep it
in asafe place for future
reference.
2Install this unit in awell ventilated, cool, dry, and clean
place with at least 5cm
above, behind and on the both
sides of this unit -away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
3Position this unit away from other electrical appliances,
motors and transformers to avoid humming sounds, do
not place this unit where it may get exposed to rain or
any kind of liquid to prevent fire or electrical shock.
4Avoid extreme temperature swings or
excessive use of
humidifier
in the room where this unit is installed to
prevent condensation inside this unit, which may cause
an electrical shock, fire damage to this unit, and/or
personal injury.
5
Do not cover this unit with anewspaper, atablecloth, a
curtain, etc.
in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit and/or personal injury.
6 Avoid installing this unit in aplace where foreign objects
and liquid might fall.
It might cause afire, damage to this
unit and/or personal injury.
Do not place the following
objects on this unit:
•Other components, as they may cause damage and/or
discoloration on the surface of this unit.
•Burning objects (I.e., candles), as they may cause fire,
damage to this unit and/or personal injury.
•Containers with liquid in them, as they may cause an
electrical shock to the user and/or damage to this unit.
7
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
S
Do not use force on switches, controls or connection
cables.
Never pull the cables when disconnecting them.
9Only voltage specified on this unit must be used. Using
this unit with ahigher voltage than specified is dangerous
and may result
in fire or other accidents. YAMAHA will not
be held responsible for any damage resulting from the
use of this unit with avoltage other than that specified.
10 Do not attempt to clean this unit with chemical solvents;
this might damage the finish. Use aclean, dry cloth.
11 Disconnect the power cord from the wall outlet when not
planning to use this unit for along period of time, or
during
an electrical storm, as they may cause damage by
lightning.
12 Do not attempt to modify or fix this unit. Contact the
qualified YAMAHA service personnel when any service is
needed. Cabinet should never
be opened for any
reasons.
13 Be sure to read 'TROUBLESHOOTING' section
regarding common operating errors before concluding
that this unit is faulty.
CAUTION
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
DANGER
Visible laser radiation when open. Avoid direct exposure to
beam.
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings
to look into inside.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class
1.
This unit is designed for home use only. Do not use this unit
for business purposes.
Be sure to place this unit on alevel surface. If not so, this
unit will fail to work normally at the PLAYXCHANGE
operation and cause damage to the disc(s) and this unit itself.
Caution for moving this unit
•When moving this unit, first remove all discs from the disc
table and close the table by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the front panel display indicates as follows.
:>2 3 4 5
Never switch off the power if the front panel display is not
pictured as above, otherwise the unitwill break down
during moving because the internal mechanism is not
locked.
•When
moving this unit, be sure to first disconnect the
power cord from the
AC outlet and disconnect all cords
connecting this unit to other equipment.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class Bdigital apparatus complies with Canadian
ICES-003.

FEATURES
CONTENTS
•5-Disc Auto-changer for playing DVD-Audio, DVD-
Video, audio CD and Video CD
•CD-R and CD-RW play compatibility
•MP3 fomlat supported
•PLAYXCHANGE; Disc changing capability while
playing another
• I OPTICAL and ICOAXIAL digital outputs for Dolby
Digital, DTS, MPEG and PCM
•96 kHz,
24 bit audio DAC for high sound quality
INI;RQDUCI;IQN
FEATURES .....••..•.•••...........................•.•..••.•.. 1
GETTING STARTED 2
Checking the package contents 2
Disc infonnation 2
CONTROL REFERENCE GUIDE 4
Front panel/remote control 4
Display 6
REMOTE CONTROL 7
Installing batteries in the remote control 7
Using the remote control 7
CONNECTIONS 8
Audio connections 8
Video connections 9
Remote control in/out terminals
IO
Power supply cord 10
111\¥BAClU<;
BASIC OPERATION 11
Before starting play 11
Playing adisc 11
Multi-speed play 13
Using adisc's menu 14
Enhancing video quality 14
DVD-Audio features
15
Enhancing audio quality 15
Switching audio tracks, subtitles and angles
................................................................ 16
SPECIFYING THE PLAY SEQUENCE ••. 17
Repeat play 17
Repeat A-B 18
Random play 18
Programmed play 19
Bookmarks 20
•Dolby Digital and DTS decoders
•Compatible with almost all features
of DVD discs
(Multi-angle, Multi-language, Parental control, etc.)
•Easy operation through on-screen menu
•Multi-speed playback capability
•Progressive video output capability (U.S.A. and Canada
models)
•Component Video and S-Video outputs for high picture
quality
ON-SCREEN MENU 21
Operating menu bar 21
Icons for disc menu 22
Shuttle screen 22
Icons for player menu 23
Operating the setup menu 25
Summary
of settings 26
Language selection and language code list
................................................................ 27
Ratings 28
peM down conversion 28
Speaker settings 28
TROUBLESHOOTING 30
SPECIFICATIONS Back cover
•The illustrations of the player and the remote control used in this
manual show U.S.A. and Canada model. Austr,i1ia model is not
equipped with the 'progressive' feature, and the related controls
and printings on the illustrations are not applicable.
I
1
FEATURES
CONTENTS
•5-Disc Auto-changer for playing DVD-Audio, DVD-
Video, audio CD and Video CD
•CD-R and CD-RW play compatibility
•MP3 fomlat supported
•PLAYXCHANGE; Disc changing capability while
playing another
• I OPTICAL and ICOAXIAL digital outputs for Dolby
Digital, DTS, MPEG and PCM
•96 kHz,
24 bit audio DAC for high sound quality
INI;RQDUCI;IQN
FEATURES .....••..•.•••...........................•.•..••.•.. 1
GETTING STARTED 2
Checking the package contents 2
Disc infonnation 2
CONTROL REFERENCE GUIDE 4
Front panel/remote control 4
Display 6
REMOTE CONTROL 7
Installing batteries in the remote control 7
Using the remote control 7
CONNECTIONS 8
Audio connections 8
Video connections 9
Remote control in/out terminals
IO
Power supply cord 10
111\¥BAClU<;
BASIC OPERATION 11
Before starting play 11
Playing adisc 11
Multi-speed play 13
Using adisc's menu 14
Enhancing video quality 14
DVD-Audio features
15
Enhancing audio quality 15
Switching audio tracks, subtitles and angles
................................................................ 16
SPECIFYING THE PLAY SEQUENCE ••. 17
Repeat play 17
Repeat A-B 18
Random play 18
Programmed play 19
Bookmarks 20
•Dolby Digital and DTS decoders
•Compatible with almost all features
of DVD discs
(Multi-angle, Multi-language, Parental control, etc.)
•Easy operation through on-screen menu
•Multi-speed playback capability
•Progressive video output capability (U.S.A. and Canada
models)
•Component Video and S-Video outputs for high picture
quality
ON-SCREEN MENU 21
Operating menu bar 21
Icons for disc menu 22
Shuttle screen 22
Icons for player menu 23
Operating the setup menu 25
Summary
of settings 26
Language selection and language code list
................................................................ 27
Ratings 28
peM down conversion 28
Speaker settings 28
TROUBLESHOOTING 30
SPECIFICATIONS Back cover
•The illustrations of the player and the remote control used in this
manual show U.S.A. and Canada model. Austr,i1ia model is not
equipped with the 'progressive' feature, and the related controls
and printings on the illustrations are not applicable.
I
1

GETTING STARTED
Check that the following items are included in your package.
Remote control
.-
.-
Batteries (AA, R06, UM-3) RCA
pin cable (audio/video)
'---
\_--
(U.S.A. and Canada models) (Australia model)
In this manual, the type of discs are indicated as below.
DVD-Video DVD-Audio Video CD Audio CD
D[] I DOLBY I
DIGITAL
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks
of
Dolby Laboratories.
DIGITAL
Iclfsl
SURROUND
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No.5,45I,942, 5,956,674,
5,974,380,5,978,762 and other world-wide patents
issued ,md pending. "DTS" ,md "DTS Digital Surround"
are registered trademarks
of Digital Theater Systems,
Inc. Copyright 1996,2000 Digital Theater Systems, Inc.
All Rights Reserved.
[Q][j~
DIGITAL AUDIO
IReWritablel
~
[Q]O~1m
DIGITAL AUDIO
I i-
[Q][j~i
DIGITAL AUDIO
IOVO-AIlovo-vi
2re
t£.. [Q]D~1ill
VIDEO CD I DIGITAL VIDED)
This DVD changer is designed for use with following types
of disc only. Never attempt to load any other type of disc
into this unit because it may damage this unit.
•This unit is not compatible with Photo-CD, CD-ROM, DVD-
ROM, DVD-RAM, SVCD,
CDV, etc. (some DVD-R, DVD-RW
and DVD+RW can
be played).
•Be sure to use only CD-R and CD-RW discs made by reliable
manufacturers. Some discs cannot
be played depending on the
disc characteristics
or recording conditions.
•Do not use any non standard shaped discs (heart, etc.).
•Do not use disc with tape, seals, or paste on it, damage to the unit
may result.
•Some DVD
,md VCD features described in this manual may not
be available or may operate in adifferent way because they are
subject to software producer's design. Check each disc's
instruction.
Example:
,0' appears when you press the skip buttons to move to the next
section.
IDeDil
byFAROUDJA
"DCDi" is atrademark of Faroudia, adivision of Sage
Inc.
This product incorporates copyright protection technol-
ogy that
is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of
this copyright protection technology must be authorized
by Macrovision Corporation, and
is intended for home
,md other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering
or disassembly is prohibited.
2
GETTING STARTED
Check that the following items are included in your package.
Remote control
.-
.-
Batteries (AA, R06, UM-3) RCA
pin cable (audio/video)
'---
\_--
(U.S.A. and Canada models) (Australia model)
In this manual, the type of discs are indicated as below.
DVD-Video DVD-Audio Video CD Audio CD
D[] I DOLBY I
DIGITAL
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks
of
Dolby Laboratories.
DIGITAL
Iclfsl
SURROUND
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No.5,45I,942, 5,956,674,
5,974,380,5,978,762 and other world-wide patents
issued ,md pending. "DTS" ,md "DTS Digital Surround"
are registered trademarks
of Digital Theater Systems,
Inc. Copyright 1996,2000 Digital Theater Systems, Inc.
All Rights Reserved.
[Q][j~
DIGITAL AUDIO
IReWritablel
~
[Q]O~1m
DIGITAL AUDIO
I i-
[Q][j~i
DIGITAL AUDIO
IOVO-AIlovo-vi
2re
t£.. [Q]D~1ill
VIDEO CD I DIGITAL VIDED)
This DVD changer is designed for use with following types
of disc only. Never attempt to load any other type of disc
into this unit because it may damage this unit.
•This unit is not compatible with Photo-CD, CD-ROM, DVD-
ROM, DVD-RAM, SVCD,
CDV, etc. (some DVD-R, DVD-RW
and DVD+RW can
be played).
•Be sure to use only CD-R and CD-RW discs made by reliable
manufacturers. Some discs cannot
be played depending on the
disc characteristics
or recording conditions.
•Do not use any non standard shaped discs (heart, etc.).
•Do not use disc with tape, seals, or paste on it, damage to the unit
may result.
•Some DVD
,md VCD features described in this manual may not
be available or may operate in adifferent way because they are
subject to software producer's design. Check each disc's
instruction.
Example:
,0' appears when you press the skip buttons to move to the next
section.
IDeDil
byFAROUDJA
"DCDi" is atrademark of Faroudia, adivision of Sage
Inc.
This product incorporates copyright protection technol-
ogy that
is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of
this copyright protection technology must be authorized
by Macrovision Corporation, and
is intended for home
,md other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering
or disassembly is prohibited.
2

GETTING STARTED
•Region management information lovo-vi
This DVD player is designed to meet DVD standard that supports region management system. Check the regional code
number marked on the disc packages.
If the number does not match this unit's region number (see the below table or the back
of this unit), this unit refuses to play that disc.
Discs can be played
or amark which includes
the region
number' I '.
or amark which includes
the region number
'4'.
Region number of this unitModel
U.S.A. and Canada models
Australia model
•Notes about handling discs
•Hold discs by touching only the edges or center hole. •Do not
try to clean the disc's surface by using any type
of disc cleaner, record spray, anti-static spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc's surface.
•Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because these
might warp or otherwise d,mlage the disc.
•When adisc is not currently being loaded on the disc
tray, store it
in ,m appropriate case.
•Playback
of discs is generally not affected by small
particles
of dust or fingerprints on their playing surface.
Even so, they should
be kept clean. Wipe by using a
clean, dry cloth. Do not wipe with acircular motion;
wipe straight outward from the center.
No!
•Repeat play
You c,m use chapter repeat or title repeat.
•Programmed play, random play
You c,mnot use programmed play ,md random play.
•On-screen icons for disc information during play
Total chapter number
Title Title
I
(Album)11 (Album) I
~::::::
Cha ter (Track)
•MP3 playback
This unit can play MP3 fomlat audio recorded for personal use with acomputer etc. onto CD-R or CD-RW. Play may not be
possible
in some cases due to the condition of the recording.
Discs recorded using MP3 differ to CDs
in the following ways.
•Structure of the disc (example)
Since the MP3 format
c,m store several albums on adisc,
an album is assigned to a'Title'. ,md atrack is assigned
to a'Chapter'.
•Starting play from aselected chapter
Select achapter using the numeric buttons (see 'To select
aspecific track' in p.13) and press ENTER.
Current chapter Elapsed play time (display
only, you
cannot use 'time index' feature.) I
3
GETTING STARTED
•Region management information lovo-vi
This DVD player is designed to meet DVD standard that supports region management system. Check the regional code
number marked on the disc packages.
If the number does not match this unit's region number (see the below table or the back
of this unit), this unit refuses to play that disc.
Discs can be played
or amark which includes
the region
number' I '.
or amark which includes
the region number
'4'.
Region number of this unitModel
U.S.A. and Canada models
Australia model
•Notes about handling discs
•Hold discs by touching only the edges or center hole. •Do not
try to clean the disc's surface by using any type
of disc cleaner, record spray, anti-static spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc's surface.
•Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because these
might warp or otherwise d,mlage the disc.
•When adisc is not currently being loaded on the disc
tray, store it
in ,m appropriate case.
•Playback
of discs is generally not affected by small
particles
of dust or fingerprints on their playing surface.
Even so, they should
be kept clean. Wipe by using a
clean, dry cloth. Do not wipe with acircular motion;
wipe straight outward from the center.
No!
•Repeat play
You c,m use chapter repeat or title repeat.
•Programmed play, random play
You c,mnot use programmed play ,md random play.
•On-screen icons for disc information during play
Total chapter number
Title Title
I
(Album)11 (Album) I
~::::::
Cha ter (Track)
•MP3 playback
This unit can play MP3 fomlat audio recorded for personal use with acomputer etc. onto CD-R or CD-RW. Play may not be
possible
in some cases due to the condition of the recording.
Discs recorded using MP3 differ to CDs
in the following ways.
•Structure of the disc (example)
Since the MP3 format
c,m store several albums on adisc,
an album is assigned to a'Title'. ,md atrack is assigned
to a'Chapter'.
•Starting play from aselected chapter
Select achapter using the numeric buttons (see 'To select
aspecific track' in p.13) and press ENTER.
Current chapter Elapsed play time (display
only, you
cannot use 'time index' feature.) I
3

CONTROL REFERENCE GUIDE
Front Panel
•
(U.S.A. model)
Remote Control
4
(U.S.A. model)
•POWER
Press to tum the power on and off.
8Disc tray
up to 5discs can be loaded on this tray.
f) ~ (OPEN/CLOSE)
Press to open and close the disc tray.
oPLAYXCHANGE (p.12)
o°(STOP)
Press to stop playback.
o DO (PAUSE)
Press to pause.
• [> (PLAY)
Press to start playback.
oPROGRESSIVE ON: front panel
PROGRESSIVE: remote control
[U.S.A. and Canada models
onIYl ... (p.14)
o kJ<J/<J<J, [>[> /[>[>
(SKIP, SLOW/SEARCH): front p~mel
kJ<l, [>[> (SKIP),
<l<J, [>[> (SLOW/SEARCH): remote control
... (p.13)
«!> VIDEO OFF (p.15)
mDISC SKIP
Press to select another disc.
CONTROL REFERENCE GUIDE
Front Panel
•
(U.S.A. model)
Remote Control
4
(U.S.A. model)
•POWER
Press to tum the power on and off.
8Disc tray
up to 5discs can be loaded on this tray.
f) ~ (OPEN/CLOSE)
Press to open and close the disc tray.
oPLAYXCHANGE (p.12)
o°(STOP)
Press to stop playback.
o DO (PAUSE)
Press to pause.
• [> (PLAY)
Press to start playback.
oPROGRESSIVE ON: front panel
PROGRESSIVE: remote control
[U.S.A. and Canada models
onIYl ... (p.14)
o kJ<J/<J<J, [>[> /[>[>
(SKIP, SLOW/SEARCH): front p~mel
kJ<l, [>[> (SKIP),
<l<J, [>[> (SLOW/SEARCH): remote control
... (p.13)
«!> VIDEO OFF (p.15)
mDISC SKIP
Press to select another disc.

f8 GROUP (p.15)
4i) Display panel
~ PLAY MODE
Press to switch among random play, program play, and
normal play.
~ REPEAT (p.17)
~ MARKER (p.20)
(D A-B (p.18)
~ SUBTITLE (p.16)
~ AUDIO (p.16)
@) ANGLE (p.16)
~TOP MENU
Press to go to the initial screen when operating in the menu
screen.
~ MENU (p.14)
Press to call up menu screen contained in the disc.
CONTROL REFERENCE GUIDE
@) Cursor buttons, ENTER
Use to select and determine an item on menu screen, etc.
~ ON SCREEN (p.21)
Press to tum the on-screen icons on and off on the video
monitor.
~ RETURN (p.14, 21, 25)
Press to go back to the previous screen when operating in
the menu screen.
~ Numeric buttons
Use to select atitle, chapter, track, etc.
~CANCEL
Press to cancel aspecific mode or asetting.
~ PAGE (p.15)
@> DISC 1, 2, 3, 4,5
Press to play the disc loaded on the guide of the correspond-
ing number.
G> SET UP (p.25)
Press to call up the setup menu screen.
I
5
f8 GROUP (p.15)
4i) Display panel
~ PLAY MODE
Press to switch among random play, program play, and
normal play.
~ REPEAT (p.17)
~ MARKER (p.20)
(D A-B (p.18)
~ SUBTITLE (p.16)
~ AUDIO (p.16)
@) ANGLE (p.16)
~TOP MENU
Press to go to the initial screen when operating in the menu
screen.
~ MENU (p.14)
Press to call up menu screen contained in the disc.
CONTROL REFERENCE GUIDE
@) Cursor buttons, ENTER
Use to select and determine an item on menu screen, etc.
~ ON SCREEN (p.21)
Press to tum the on-screen icons on and off on the video
monitor.
~ RETURN (p.14, 21, 25)
Press to go back to the previous screen when operating in
the menu screen.
~ Numeric buttons
Use to select atitle, chapter, track, etc.
~CANCEL
Press to cancel aspecific mode or asetting.
~ PAGE (p.15)
@> DISC 1, 2, 3, 4,5
Press to play the disc loaded on the guide of the correspond-
ing number.
G> SET UP (p.25)
Press to call up the setup menu screen.
I
5

CONTROL REFERENCE GUIDE
o
•••
••
• •
••
••
••
•••
• ••
••
••
••
••
••
•••
••• • ••
• • ••
• • • •
• • • •
• • • •
• • • •
••• • ••
••• ••• •••
•••• • •
••••••
••••••
·.... ."
· . . . . .i i
.~~ ._~~.!-___~_ •.i i
'----,--'---------------,---------------
4i)
O:v:g)~
One of these numbers lights up to show the currently
selected disc, which
is loaded on the guide of the corre-
sponding number.
8[>
Lights up during playback.
e DO
Lights up while playback is paused.
GPROG
Lights up during program play.
ORND
Lights up during random-sequence play.
oRepeat mode indicators
oREP and A-B light up when repeating between the two
points you have specified.
oREP and IDISC light up when repeating the cU1Tently
selected disc.
oREP and 5DISC light up when repeating all the discs
loaded on the disc tray.
eAudio type indicators
db, DOD (=dolby digital), MPEG. PCM (=Iinear PCM).
PPCM (=packed PCM):
Indicates the audio format
of adisc. When adisc
contains several different formats, the currently
selected format lights
up.
MLTCH: Lights up when amulti-channel audio track is
playing.
DMIX: Lights
up to show that the currently playing
multi-channel audio track can
be mixed down into
2channels -does not mean that the track
is
actually down-mixed. With some DVD-Audio
discs. 2channels down-mix
is prohibited and the
indicator does not light up while playing the disc.
YSS: Lights up when the virtual surround feature
is
turned on.
6
eDisc type indicators
Indicates the type of disc. For example, DVD and AUDIO
lights up when playing aDYD-Audio disc.
oGROUP IDVD-A I
The current (or programmed) group number appears below
the indicator.
4@ TITLE, CHAP IDVD-VI
The current (or programmed) title number and chapter
number appears below each indicator. TITLE (or CHAP)
also lights up with REP indicator when repeating atitle (or a
chapter).
4D TRACK IDVD·AIi.'i!ill [iD
The current (or programmed) track number appears below
the indicator. It also lights up with REP indicator when
repeating atrack.
~ Multi-information display
Shows various information such as title, chapter or track
number, elapsed playing time etc.
4i) ANGLE
Lights up when the scene currently played contains different
angle(s).
CONTROL REFERENCE GUIDE
o
•••
••
• •
••
••
••
•••
• ••
••
••
••
••
••
•••
••• • ••
• • ••
• • • •
• • • •
• • • •
• • • •
••• • ••
••• ••• •••
•••• • •
••••••
••••••
·.... ."
· . . . . .i i
.~~ ._~~.!-___~_ •.i i
'----,--'---------------,---------------
4i)
O:v:g)~
One of these numbers lights up to show the currently
selected disc, which
is loaded on the guide of the corre-
sponding number.
8[>
Lights up during playback.
e DO
Lights up while playback is paused.
GPROG
Lights up during program play.
ORND
Lights up during random-sequence play.
oRepeat mode indicators
oREP and A-B light up when repeating between the two
points you have specified.
oREP and IDISC light up when repeating the cU1Tently
selected disc.
oREP and 5DISC light up when repeating all the discs
loaded on the disc tray.
eAudio type indicators
db, DOD (=dolby digital), MPEG. PCM (=Iinear PCM).
PPCM (=packed PCM):
Indicates the audio format
of adisc. When adisc
contains several different formats, the currently
selected format lights
up.
MLTCH: Lights up when amulti-channel audio track is
playing.
DMIX: Lights
up to show that the currently playing
multi-channel audio track can
be mixed down into
2channels -does not mean that the track
is
actually down-mixed. With some DVD-Audio
discs. 2channels down-mix
is prohibited and the
indicator does not light up while playing the disc.
YSS: Lights up when the virtual surround feature
is
turned on.
6
eDisc type indicators
Indicates the type of disc. For example, DVD and AUDIO
lights up when playing aDYD-Audio disc.
oGROUP IDVD-A I
The current (or programmed) group number appears below
the indicator.
4@ TITLE, CHAP IDVD-VI
The current (or programmed) title number and chapter
number appears below each indicator. TITLE (or CHAP)
also lights up with REP indicator when repeating atitle (or a
chapter).
4D TRACK IDVD·AIi.'i!ill [iD
The current (or programmed) track number appears below
the indicator. It also lights up with REP indicator when
repeating atrack.
~ Multi-information display
Shows various information such as title, chapter or track
number, elapsed playing time etc.
4i) ANGLE
Lights up when the scene currently played contains different
angle(s).

REMOTE CONTROL
Turn the remote control over and slide the
battery compartment cover in the direction of
the arrow.
fA Insert the batteries (AA, R06, UM-3 type)
according the polarity markings on the inside
of the battery compartment.
~ Close the battery compartment cover.
If the remote control operates only when
it is close to the unit, the batteries are weak. Replace all the batteries with new ones.
•Use only AA, R06 or UM-3 batteries for replacement.
•Be sure the battery polarity is correct. (See the illustration inside the battery compartment.)
•Remove the batteries ifthe remote control will not
be used for an extended period of time.
•
If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with
clothing. etc. Clean the battery compartment thoroughly before installing new batteries.
-
':1
Remote control sensor
o
00 oiS
(0000)0
The remote control transmits adirectional infrared beam. Be
sure to aim the remote control directly at the infrared sensor
during operation. When the sensor
is covered or there is a
large object between the remote control and the sensor, the
sensor cannot receive signals. The sensor may not
be able to
receive signals properly when
it is exposed to direct sunlight
or astrong artificial light (such as afluorescent
or strobe
light). In this case, change the direction
of the light or
reposition the unit to avoid direct lighting.
•Handle the remote control with care.
•Do not spill water, tea
or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave
or store the remote control in the following
conditions:
-high humidity or temperature such
as near aheater, stove or
bath;
-dusty places; or
-extremely low temperature.
I
7
REMOTE CONTROL
Turn the remote control over and slide the
battery compartment cover in the direction of
the arrow.
fA Insert the batteries (AA, R06, UM-3 type)
according the polarity markings on the inside
of the battery compartment.
~ Close the battery compartment cover.
If the remote control operates only when
it is close to the unit, the batteries are weak. Replace all the batteries with new ones.
•Use only AA, R06 or UM-3 batteries for replacement.
•Be sure the battery polarity is correct. (See the illustration inside the battery compartment.)
•Remove the batteries ifthe remote control will not
be used for an extended period of time.
•
If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with
clothing. etc. Clean the battery compartment thoroughly before installing new batteries.
-
':1
Remote control sensor
o
00 oiS
(0000)0
The remote control transmits adirectional infrared beam. Be
sure to aim the remote control directly at the infrared sensor
during operation. When the sensor
is covered or there is a
large object between the remote control and the sensor, the
sensor cannot receive signals. The sensor may not
be able to
receive signals properly when
it is exposed to direct sunlight
or astrong artificial light (such as afluorescent
or strobe
light). In this case, change the direction
of the light or
reposition the unit to avoid direct lighting.
•Handle the remote control with care.
•Do not spill water, tea
or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave
or store the remote control in the following
conditions:
-high humidity or temperature such
as near aheater, stove or
bath;
-dusty places; or
-extremely low temperature.
I
7

CONNECTIONS
emmm
•Ncver connect this unit and other equipmcnt to power supply until all connections have been complcted.
Be sure all connections are made correctly. observing the color-coding
of terminals of both this unit and the equipment to be
connected. Also refer
to the instructions of the equipment to be connected.
Left rear
speaker Right rear speaker
•Digital outputs
This unit has COAXIAL and OPTICAL digital output
terminals. Connect one
of them to your AV amplifier
equipped with Dolby digital, DTS, or MPEG decoder using
each specific cable (separate purchase).
Required Audio settings (See p.25, 26 and 27):
•Digital Audio Output --+ On
•PCM Down Conversion, Dolby Digital, DTS Digital
Surround, MPEG
--+ Verify your AV amplifier's capabil-
ity.
Notes on digital recording
You can record the source from this unit through your AV
center (AV amplifier, etc.) or connecting these ternlinals
directly to your CD recorder, etc.
•With CD, wait for the total play time to appear before
turning on your recording unit's synchro recording
feature. The beginning may be cut off ifyou turn it while
'READING'
is displayed.
•With DVDs, recording may
be interrupted when anew
chapter begins.
If it persists, use analog recording by
making analog connections. These phenomena occur
because DVD player must first determine the audio
format and sampling frequency before switching digital
output.
8
•Analog outputs
(~6CH DISCRETE terminals
This unit incorporates multi-channel decoder and can be
connected to your AV amplifier as an external decoder. With
this connection, you can enjoy a96 kHz
or more sampling
frequency multi-channel audio track on aDVD-Audio disc,
etc. even if the disc
is copyright-protected. However, your
AV amplifier's digital sound processing features have no
effect on the audio signals output from these terminals.
Required Audio settings (See p.25. 26 and 29):
•Speaker settings --+ Multi-channel*
•Digital Audio Output
--+ OfI
*Also make output mode, delay time and speaker
balance adjustments.
@AUDIO OUT (MIXED 2CH) terminals
You can connect this unit to any component that has analog
2channel input terminals using the RCA audio cable
supplied with this unit.
CONNECTIONS
emmm
•Ncver connect this unit and other equipmcnt to power supply until all connections have been complcted.
Be sure all connections are made correctly. observing the color-coding
of terminals of both this unit and the equipment to be
connected. Also refer
to the instructions of the equipment to be connected.
Left rear
speaker Right rear speaker
•Digital outputs
This unit has COAXIAL and OPTICAL digital output
terminals. Connect one
of them to your AV amplifier
equipped with Dolby digital, DTS, or MPEG decoder using
each specific cable (separate purchase).
Required Audio settings (See p.25, 26 and 27):
•Digital Audio Output --+ On
•PCM Down Conversion, Dolby Digital, DTS Digital
Surround, MPEG
--+ Verify your AV amplifier's capabil-
ity.
Notes on digital recording
You can record the source from this unit through your AV
center (AV amplifier, etc.) or connecting these ternlinals
directly to your CD recorder, etc.
•With CD, wait for the total play time to appear before
turning on your recording unit's synchro recording
feature. The beginning may be cut off ifyou turn it while
'READING'
is displayed.
•With DVDs, recording may
be interrupted when anew
chapter begins.
If it persists, use analog recording by
making analog connections. These phenomena occur
because DVD player must first determine the audio
format and sampling frequency before switching digital
output.
8
•Analog outputs
(~6CH DISCRETE terminals
This unit incorporates multi-channel decoder and can be
connected to your AV amplifier as an external decoder. With
this connection, you can enjoy a96 kHz
or more sampling
frequency multi-channel audio track on aDVD-Audio disc,
etc. even if the disc
is copyright-protected. However, your
AV amplifier's digital sound processing features have no
effect on the audio signals output from these terminals.
Required Audio settings (See p.25. 26 and 29):
•Speaker settings --+ Multi-channel*
•Digital Audio Output
--+ OfI
*Also make output mode, delay time and speaker
balance adjustments.
@AUDIO OUT (MIXED 2CH) terminals
You can connect this unit to any component that has analog
2channel input terminals using the RCA audio cable
supplied with this unit.

CONNECTIONS
(U.S.A. model)
COMPONENT SVIDEO VIDEO
VIDEO OUT OUT OUT
COMPONENT
SVIDEO
VIDEO
VIDEO IN IN IN
D
Video monitor
If your AV amplifier has video terminals, connect your
amplitier (and then to your video monitor) so that you can
use one video monitor for several different video sources
(LD, VCR etc.) by simply switching the input source
selector
of your amplitier.
This unit has three types
of video output terminals. Use one
of them in accordance with the input terminals of the
equipment to
be connected.
•Do not connect this unit to avideo monitor through avideo
cassette recorder. Ifyou do so, the picture may not be played back
properly due to the copyright protection technology incorporated
in this unit.
(6JComponent Video terminal
Component video connection achieves high fidelity in
reproducing colors (better performance than S-video
connection), separating video signal into luminance
(Y,
tCffilinal color-coded as green), and color difference (PB,
blue/PR, red). Use commercially available coaxial cables.
Amplifier (and Video monitor) with component input
is
required. Observe the color of each terminal when connect-
ing.
If your amplifier does not have component output
terminals, connecting this unit's component output directly
to your video monitor's component input can reproduce
better video image.
•Do not connect this unit's COMPONENTVIDEO OUT terminals
to component video input terminals special for
HD (High-
Definition)
TV.
(~)S-Video terminal
S(separate) video connection achieves aclearer picture than
composite video connection
by separating color and
luminance when transmitting signals. Use commercially
available S-video cable. Amplifier (and Video monitor) with
S-video input
is required.
(~)Composite Video terminal (1,2)
Use RCA video cable supplied with this unit
when connecting this unit to avideo monitor.
VIDEO 1,2 teffi1inals of VIDEO OUT output the same
signal.
You can connect one to your amplifier's input using
supplied RCA cable, and the other to another amplifier
or a
video monitor.
I
9
CONNECTIONS
(U.S.A. model)
COMPONENT SVIDEO VIDEO
VIDEO OUT OUT OUT
COMPONENT
SVIDEO
VIDEO
VIDEO IN IN IN
D
Video monitor
If your AV amplifier has video terminals, connect your
amplitier (and then to your video monitor) so that you can
use one video monitor for several different video sources
(LD, VCR etc.) by simply switching the input source
selector
of your amplitier.
This unit has three types
of video output terminals. Use one
of them in accordance with the input terminals of the
equipment to
be connected.
•Do not connect this unit to avideo monitor through avideo
cassette recorder. Ifyou do so, the picture may not be played back
properly due to the copyright protection technology incorporated
in this unit.
(6JComponent Video terminal
Component video connection achieves high fidelity in
reproducing colors (better performance than S-video
connection), separating video signal into luminance
(Y,
tCffilinal color-coded as green), and color difference (PB,
blue/PR, red). Use commercially available coaxial cables.
Amplifier (and Video monitor) with component input
is
required. Observe the color of each terminal when connect-
ing.
If your amplifier does not have component output
terminals, connecting this unit's component output directly
to your video monitor's component input can reproduce
better video image.
•Do not connect this unit's COMPONENTVIDEO OUT terminals
to component video input terminals special for
HD (High-
Definition)
TV.
(~)S-Video terminal
S(separate) video connection achieves aclearer picture than
composite video connection
by separating color and
luminance when transmitting signals. Use commercially
available S-video cable. Amplifier (and Video monitor) with
S-video input
is required.
(~)Composite Video terminal (1,2)
Use RCA video cable supplied with this unit
when connecting this unit to avideo monitor.
VIDEO 1,2 teffi1inals of VIDEO OUT output the same
signal.
You can connect one to your amplifier's input using
supplied RCA cable, and the other to another amplifier
or a
video monitor.
I
9

CONNECTIONS
..
To AC outlet
10
These terminals are used for custom installation system that
transmits remote control signals via cables. Connect this
unit's REMOTE CONTROL IN to the Remote control
output
of the control unit of your system.
By connecting this unit's REMOTE CONTROL OUT to
another piece of equipment's Remote control input terminal,
you can also operate that equipment with the system remote
control.
After completing all connections, connect the AC power
cord to
an AC power outlet.
CONNECTIONS
..
To AC outlet
10
These terminals are used for custom installation system that
transmits remote control signals via cables. Connect this
unit's REMOTE CONTROL IN to the Remote control
output
of the control unit of your system.
By connecting this unit's REMOTE CONTROL OUT to
another piece of equipment's Remote control input terminal,
you can also operate that equipment with the system remote
control.
After completing all connections, connect the AC power
cord to
an AC power outlet.

BASIC OPERATION
To playa disc properly, you need to adjust the formats of audio and vidco signals output from this unit in accordancc with the
clJuipment connected to this unit. Sce
p.2S to 27.
~
o If your AV amplificr does not incOlvorate DTS decoder ,md you have connected this unit ,md the amplifier through
digital terminals, pleasc make sure that the 'DTS Digital Surround' at 'Audio' SETUP MENU
is set to peM (factory-
setting). Otherwise, unprocessed digital signals will be output and its noise could damage your ears and your speakers.
1
3Label side
upward
.---'~
Disc tray
4(PLAY)
2•Preparation
Select DVD as the input source on your AV amplifier.
UPress POWER to turn the power on.
fJ Press ~ (or OPEN/CLOSE) to open the disc
tray.
mLoad discs.
Use the disc guides (numbered, Ito 5) to align the
discs correctly.
o Press> (PLAY).
The disc tray closes ,md playback starts. This unit plays
all discs on the tray in sequence.
•If necessary, select adesired disc using DISC SKIP or one ofthe
DISC J, 2, 3, 4or 5buttons.
oWhen amenu screen appears IDVD-A II DVD-V ii!liD:
See 'Using aDisc's Menu' in p.14.
oWhen this unit finishes playing aDVD, this unit stops playback or
shows the menu screen and does not start playing the next disc.
oThis unit cannot playa CD-R or CD-RW disc unless the disc has
been finalized. Please make sure to finalize the disc on the CD
recorder before playing
it on this unit.
I
11
BASIC OPERATION
To playa disc properly, you need to adjust the formats of audio and vidco signals output from this unit in accordancc with the
clJuipment connected to this unit. Sce
p.2S to 27.
~
o If your AV amplificr does not incOlvorate DTS decoder ,md you have connected this unit ,md the amplifier through
digital terminals, pleasc make sure that the 'DTS Digital Surround' at 'Audio' SETUP MENU
is set to peM (factory-
setting). Otherwise, unprocessed digital signals will be output and its noise could damage your ears and your speakers.
1
3Label side
upward
.---'~
Disc tray
4(PLAY)
2•Preparation
Select DVD as the input source on your AV amplifier.
UPress POWER to turn the power on.
fJ Press ~ (or OPEN/CLOSE) to open the disc
tray.
mLoad discs.
Use the disc guides (numbered, Ito 5) to align the
discs correctly.
o Press> (PLAY).
The disc tray closes ,md playback starts. This unit plays
all discs on the tray in sequence.
•If necessary, select adesired disc using DISC SKIP or one ofthe
DISC J, 2, 3, 4or 5buttons.
oWhen amenu screen appears IDVD-A II DVD-V ii!liD:
See 'Using aDisc's Menu' in p.14.
oWhen this unit finishes playing aDVD, this unit stops playback or
shows the menu screen and does not start playing the next disc.
oThis unit cannot playa CD-R or CD-RW disc unless the disc has
been finalized. Please make sure to finalize the disc on the CD
recorder before playing
it on this unit.
I
11

BASIC OPERATION
•This function may not work with some DVDs.
•Canceling resume function will also clear the chapter review
function.
•Selecting another disc cancels the resume function.
•This function may not work with some discs
or on some part of
adisc.
• To stop playback
Press C(STOP).
This unit memorizes where C(STOP) was pressed as long
as this unit
is turned on (~ indicator flashes on the display).
When you press
l> (PLAY) in this status, playback resumes
from where
it was stopped.
To clear the memory, press C(STOP) once more so that the
~ indicator goes off.
This function plays the first few seconds
of each chapter
from the beginning
of the title up to the memOlized point so
that you can review previous chapters.
Press
1:-> (pLAY) while the message for chapter review is
displayed on the screen.
• To select aspecific disc
Press DISC 1,2,3,4 or 5.
• You can select another disc by pressing DISC SKIP.
PLAY
PLAY STOP
DISC
1-5
DISC SKIP
DISC SKIP PLAYXCHANGE
STOP
POWER
By pressing PLAYXCHANGE, you can open the disc tray
~U1d load or replace discs without interrupting play.
However, never load adisc on the guide halfhidden
inside the unit
bec~1Use the disc currently being played is
to be placed there.
•After operation
When this unit is not in use, remove discs and press
POWER.
12
BASIC OPERATION
•This function may not work with some DVDs.
•Canceling resume function will also clear the chapter review
function.
•Selecting another disc cancels the resume function.
•This function may not work with some discs
or on some part of
adisc.
• To stop playback
Press C(STOP).
This unit memorizes where C(STOP) was pressed as long
as this unit
is turned on (~ indicator flashes on the display).
When you press
l> (PLAY) in this status, playback resumes
from where
it was stopped.
To clear the memory, press C(STOP) once more so that the
~ indicator goes off.
This function plays the first few seconds
of each chapter
from the beginning
of the title up to the memOlized point so
that you can review previous chapters.
Press
1:-> (pLAY) while the message for chapter review is
displayed on the screen.
• To select aspecific disc
Press DISC 1,2,3,4 or 5.
• You can select another disc by pressing DISC SKIP.
PLAY
PLAY STOP
DISC
1-5
DISC SKIP
DISC SKIP PLAYXCHANGE
STOP
POWER
By pressing PLAYXCHANGE, you can open the disc tray
~U1d load or replace discs without interrupting play.
However, never load adisc on the guide halfhidden
inside the unit
bec~1Use the disc currently being played is
to be placed there.
•After operation
When this unit is not in use, remove discs and press
POWER.
12

BASIC OPERATION
SKIP
PLAY PAUSE
SKIP /SLOW/SEARCH
Cursor buttons
«J, I»
PLAY
PAUSE
SLOW/SEARCH
Numeric buttons
• To select aspecific track i!liilliD
Enter adesired track number using numeric buttons.
To select atwo-digit number, press ~IO and then enter the
upper figure and the last figure successively.
Example (to
sele<':l track 17):
1Press ~1O.
2Press I.
3Press 7.
•Search
Press SLOW/SEARCH c>{> (or ~-:'r<:J) on the remote control
to search forward (or backward).
or
Press and hold l>i>/f>I>, (or
1<.1<J/<1<1) on the front panel to
search forward (or backward).
•To increase the speed, press SLOW/SEARCH on the remote
control repeatedly or keep pressing
»f», '<KJ/<Y-J on the front
panel.
•Pause
Press nn (PAUSE).
o To resume play, press c--'> (PLAY).
•Frame advance/reverse
IDVD-AllDVD-VI ~
1Press nn (PAUSE) during playback.
2Press the cursor buttons (<1, [».
Each press advances (or reverses) still picture by one frame.
oTo return to normal play, press [> (PLAY).
oWith Video CD, you cannot move backward.
•Skip
Press SKIP C--ot>, (or 'c::J<1) on the remote control to skip
forward (or backward). or
Press
L>I>,fL>C>j (or "-:'r<:J/<J<J) on the front panel to skip
forward (or backward).
Press once for each chapter (track) to
be skipped.
•When playing aYCD with playback control, skip operation may
not function as described above.
•Slow IDVD-A II DVD-vi WiD
1Press on (PAUSE) during playback.
2Press SLOW/SEARCH I>l> (or <1<1) on the remote
control. or
Press and hold
C>f>/c>1>1 (or 1<.1<1/<1<.1) on the front panel.
o To return to normal play, press [> (PLAY).
\"
~(j)~
• To increase the speed, press SLOW/SEARCH on the remote
control repeatedly
or keep pressing f>JVf», '<KJ/<J<J on the front
panel.
•With Video CD, you cannot move backward.
I
13
BASIC OPERATION
SKIP
PLAY PAUSE
SKIP /SLOW/SEARCH
Cursor buttons
«J, I»
PLAY
PAUSE
SLOW/SEARCH
Numeric buttons
• To select aspecific track i!liilliD
Enter adesired track number using numeric buttons.
To select atwo-digit number, press ~IO and then enter the
upper figure and the last figure successively.
Example (to
sele<':l track 17):
1Press ~1O.
2Press I.
3Press 7.
•Search
Press SLOW/SEARCH c>{> (or ~-:'r<:J) on the remote control
to search forward (or backward).
or
Press and hold l>i>/f>I>, (or
1<.1<J/<1<1) on the front panel to
search forward (or backward).
•To increase the speed, press SLOW/SEARCH on the remote
control repeatedly or keep pressing
»f», '<KJ/<Y-J on the front
panel.
•Pause
Press nn (PAUSE).
o To resume play, press c--'> (PLAY).
•Frame advance/reverse
IDVD-AllDVD-VI ~
1Press nn (PAUSE) during playback.
2Press the cursor buttons (<1, [».
Each press advances (or reverses) still picture by one frame.
oTo return to normal play, press [> (PLAY).
oWith Video CD, you cannot move backward.
•Skip
Press SKIP C--ot>, (or 'c::J<1) on the remote control to skip
forward (or backward). or
Press
L>I>,fL>C>j (or "-:'r<:J/<J<J) on the front panel to skip
forward (or backward).
Press once for each chapter (track) to
be skipped.
•When playing aYCD with playback control, skip operation may
not function as described above.
•Slow IDVD-A II DVD-vi WiD
1Press on (PAUSE) during playback.
2Press SLOW/SEARCH I>l> (or <1<1) on the remote
control. or
Press and hold
C>f>/c>1>1 (or 1<.1<1/<1<.1) on the front panel.
o To return to normal play, press [> (PLAY).
\"
~(j)~
• To increase the speed, press SLOW/SEARCH on the remote
control repeatedly
or keep pressing f>JVf», '<KJ/<J<J on the front
panel.
•With Video CD, you cannot move backward.
I
13

BASIC OPERATION
•Video CD's playback control
If 'PBC' appears on the display while playing aVideo CD,
this unit
is in playback control mode and amenu screen
appears on the video monitor.
You can operate menu screens
using the following buttons.
fJ Press the cursor buttons (6, V, <1, L» to select
the desired item.
Numeric buttons: Press to select the desired item.
RETURN: Press to go back to the previous screen
>(PLAY): Press to play the selected item
".O{:."i: Press to show the next screen
<1<]: Press to show the previous screen
D(STOP): Press while amenu screen appears on the video
monitor to cancel the playback control.
!J Press ENTER to go to the screen of the
selected item or to start playing the selected
item.
You may also use the numeric buttons to operate
steps 2and
3.
Numeric buttons
MENU
RETURN
[> (PLAY)
U(STOP)
<J<J, ~.,{>j (SKIP)
TOP MENU
Cursor buttons,
ENTER
Discs may contain multiple audio tracks, subtitles, index and bonus matetials such as movie trailers and cast infoffilation, etc.
And many
of them have menu screens that enable you to control these features. This section gives you general instruction
about how to operate these screens. However, the operation methods may differ depending on the disc.
UPressTOP MENU or MENU during playback to
show menu screen.
With some discs, menu screen appears automatically
when you start playback.
•Playback control is automatically canceled during program play
or random-sequence play.
PROGRESSIVE ON This unit's component video outputs are capable
of output
progressive signals. You can enjoy even higher quality
picture if you have connected this unit to amonitor that can
receive progressive signals.
Press PROGRESSIVE (or PROGRESSIVE ON on the front
panel).
The PROGRESSIVE indicator lights
up.
• To c,mcel this feature, press PROGRESSIVE again.
PROGRESSIVE indicator
PROGRESSIVE
• If the screen shifts offcenter when using progressive output, see
'Adjusting the screen position' on p.24.
•When playing 4:3 aspect software with a 16:9 aspect wide-screen
monitor using progressive output, the picture may appear
horizontally stretched to fill the screen.
In that case, change the
aspect to the correct one
at your monitor, If the monitor cannot
change the aspect,
it is recommended to tum the progressive
feature off.
14
BASIC OPERATION
•Video CD's playback control
If 'PBC' appears on the display while playing aVideo CD,
this unit
is in playback control mode and amenu screen
appears on the video monitor.
You can operate menu screens
using the following buttons.
fJ Press the cursor buttons (6, V, <1, L» to select
the desired item.
Numeric buttons: Press to select the desired item.
RETURN: Press to go back to the previous screen
>(PLAY): Press to play the selected item
".O{:."i: Press to show the next screen
<1<]: Press to show the previous screen
D(STOP): Press while amenu screen appears on the video
monitor to cancel the playback control.
!J Press ENTER to go to the screen of the
selected item or to start playing the selected
item.
You may also use the numeric buttons to operate
steps 2and
3.
Numeric buttons
MENU
RETURN
[> (PLAY)
U(STOP)
<J<J, ~.,{>j (SKIP)
TOP MENU
Cursor buttons,
ENTER
Discs may contain multiple audio tracks, subtitles, index and bonus matetials such as movie trailers and cast infoffilation, etc.
And many
of them have menu screens that enable you to control these features. This section gives you general instruction
about how to operate these screens. However, the operation methods may differ depending on the disc.
UPressTOP MENU or MENU during playback to
show menu screen.
With some discs, menu screen appears automatically
when you start playback.
•Playback control is automatically canceled during program play
or random-sequence play.
PROGRESSIVE ON This unit's component video outputs are capable
of output
progressive signals. You can enjoy even higher quality
picture if you have connected this unit to amonitor that can
receive progressive signals.
Press PROGRESSIVE (or PROGRESSIVE ON on the front
panel).
The PROGRESSIVE indicator lights
up.
• To c,mcel this feature, press PROGRESSIVE again.
PROGRESSIVE indicator
PROGRESSIVE
• If the screen shifts offcenter when using progressive output, see
'Adjusting the screen position' on p.24.
•When playing 4:3 aspect software with a 16:9 aspect wide-screen
monitor using progressive output, the picture may appear
horizontally stretched to fill the screen.
In that case, change the
aspect to the correct one
at your monitor, If the monitor cannot
change the aspect,
it is recommended to tum the progressive
feature off.
14

BASIC OPERATION
This section explains about some features particular to DVD-Audio. Though most of the content selection can be controlled
using adisc's menu like DVD-Video, there exists
in aDVD-Audio the unit called 'group' that is something equivalent to
DVD-Video's'title'.
Cursor buttons,
ENTER
GROUP
Numeric buttons
PAGE
• To playa track on aspecific group
DPress GROUP.
The group and track icons appears on the video
monitor.
fJ Press the cursor buttons (lI, v) to select a
group number and press ENTER.
~Press the cursor buttons (lI, v) to select atrack
number and press ENTER.
The selected track starts to play.
•
You can also use the numeric buttons to select agroup
and atrack.
• To playa bonus group
Some discs contain bonus groups. If it requires 4digit
password. consult the disc jacket, etc.
~md enter the
password using the numeric buttons and then press ENTER.
• To change pages
DVD-Audio may contain some information screens called
'pages'that show photo galleries, artist biographies and
lyrics, etc. When it appears, you can move to another page
by pressing PAGE (page number appears on the display
when you change pages.).
•Some discs may navigate you to press the cursor buttons
(<J, :» to turn pages.
VIDEO OFF
VIDEO OFF indicator
You can enjoy even higher quality sound by turning off the
video signal output.
Press VIDEO OFF.
Picture
is turned offand the VIDEO OFF indicator lights
up.
• To cancel this feature, press VIDEO OFF again.
•While you pause or search play, this unit outputs the
video signal and the picture
is shown on the video
monitor.
VIDEO OFF
15 I
BASIC OPERATION
This section explains about some features particular to DVD-Audio. Though most of the content selection can be controlled
using adisc's menu like DVD-Video, there exists
in aDVD-Audio the unit called 'group' that is something equivalent to
DVD-Video's'title'.
Cursor buttons,
ENTER
GROUP
Numeric buttons
PAGE
• To playa track on aspecific group
DPress GROUP.
The group and track icons appears on the video
monitor.
fJ Press the cursor buttons (lI, v) to select a
group number and press ENTER.
~Press the cursor buttons (lI, v) to select atrack
number and press ENTER.
The selected track starts to play.
•
You can also use the numeric buttons to select agroup
and atrack.
• To playa bonus group
Some discs contain bonus groups. If it requires 4digit
password. consult the disc jacket, etc.
~md enter the
password using the numeric buttons and then press ENTER.
• To change pages
DVD-Audio may contain some information screens called
'pages'that show photo galleries, artist biographies and
lyrics, etc. When it appears, you can move to another page
by pressing PAGE (page number appears on the display
when you change pages.).
•Some discs may navigate you to press the cursor buttons
(<J, :» to turn pages.
VIDEO OFF
VIDEO OFF indicator
You can enjoy even higher quality sound by turning off the
video signal output.
Press VIDEO OFF.
Picture
is turned offand the VIDEO OFF indicator lights
up.
• To cancel this feature, press VIDEO OFF again.
•While you pause or search play, this unit outputs the
video signal and the picture
is shown on the video
monitor.
VIDEO OFF
15 I

BASIC OPERATION
DVD-Video
Press AUDIO during play.
The Audio track icon appears on the video monitor.
•Pressing the button repeatedly toggles through all audio
tracks recorded on the disc.
You can also use the cursor
buttons
(6,\7) or the numeric buttons to change tracks.
•
You can also use the button to tum the vocals on and off
on karaoke discs. See the instruction
of each disc.
Some discs are encoded with several audio tracks, multilin-
gual subtitles or multiple camera angles. Refer to disc jacket
etc. to see which feature
is supported.
•Play restarts from the beginning of the current track if you change
audio track while playing DVD-Audio, other than video section.
•With DVD-Audio, track number 2may appear even if the disc
does not support multiple audio tracks.
•Audio tracks
Different audio track languages and/or fOI111ats can be
selected ifavailable on the disc.
•Subtitles
Press SUBTITLE during play.
The subtitle icon appears on the video monitor.
•Pressing the button repeatedly toggles through
aU
subtitles recorded on the disc. You can also use the cursor
buttons
(6, \7) or the numeric buttons to change subtitles.
To turn on/off the subtitles:
fJ Press the cursor button (».
oPress SUBTITLE.
ANGLE
6,V,l>
RETURN
Numeric buttons
1 r~
Selected audio track number
-can be switched to 2
even if the
audio track does not recorded on
the disc.
SUBTITLE
AUDIO
AUDIO
DVD-Audio
Currently playing audio track
number 6Press the cursor buttons
(6,\7) to select ON
and OFF.
SUBTITLE
Subtitle language number being played
ANGLE
Angle number being played
• .- -' appears if the disc does not have asubtitle.
•Subtitles may not change immediately after you press the bulton.
•Angles
Some DVDs have scenes encoded with multiple camera
angles so that different viewpoint can be selected during
playback. ANGLE lights up on the front p,mel display while
ascene encoded with multiple angles
is being played.
Press ANGLE while ANGLE on the front panel display
lights up.
The angle icon appears on the video monitor.
•Pressing the button repeatedly toggles through all angles
recorded on the disc.
You can also use the cursor buttons
(6, \7) or the numeric buttons to change angles.
• To turn the icon off
Press RETURN.
•With some discs, you cannot change audio tracks, subtitles or
angles
in the way described above. In that case, go to the disc
menu and change them.
16
BASIC OPERATION
DVD-Video
Press AUDIO during play.
The Audio track icon appears on the video monitor.
•Pressing the button repeatedly toggles through all audio
tracks recorded on the disc.
You can also use the cursor
buttons
(6,\7) or the numeric buttons to change tracks.
•
You can also use the button to tum the vocals on and off
on karaoke discs. See the instruction
of each disc.
Some discs are encoded with several audio tracks, multilin-
gual subtitles or multiple camera angles. Refer to disc jacket
etc. to see which feature
is supported.
•Play restarts from the beginning of the current track if you change
audio track while playing DVD-Audio, other than video section.
•With DVD-Audio, track number 2may appear even if the disc
does not support multiple audio tracks.
•Audio tracks
Different audio track languages and/or fOI111ats can be
selected ifavailable on the disc.
•Subtitles
Press SUBTITLE during play.
The subtitle icon appears on the video monitor.
•Pressing the button repeatedly toggles through
aU
subtitles recorded on the disc. You can also use the cursor
buttons
(6, \7) or the numeric buttons to change subtitles.
To turn on/off the subtitles:
fJ Press the cursor button (».
oPress SUBTITLE.
ANGLE
6,V,l>
RETURN
Numeric buttons
1 r~
Selected audio track number
-can be switched to 2
even if the
audio track does not recorded on
the disc.
SUBTITLE
AUDIO
AUDIO
DVD-Audio
Currently playing audio track
number 6Press the cursor buttons
(6,\7) to select ON
and OFF.
SUBTITLE
Subtitle language number being played
ANGLE
Angle number being played
• .- -' appears if the disc does not have asubtitle.
•Subtitles may not change immediately after you press the bulton.
•Angles
Some DVDs have scenes encoded with multiple camera
angles so that different viewpoint can be selected during
playback. ANGLE lights up on the front p,mel display while
ascene encoded with multiple angles
is being played.
Press ANGLE while ANGLE on the front panel display
lights up.
The angle icon appears on the video monitor.
•Pressing the button repeatedly toggles through all angles
recorded on the disc.
You can also use the cursor buttons
(6, \7) or the numeric buttons to change angles.
• To turn the icon off
Press RETURN.
•With some discs, you cannot change audio tracks, subtitles or
angles
in the way described above. In that case, go to the disc
menu and change them.
16