Yamaha DV-C6860 - DVD Changer User manual

_YAMAHA
DVD CHANGER
LECTEUR
DE DVD CHANGEUR
DV-C6860
OWNER'S MANUAL
MODE D'EMPLOI
DXD ffi]D~@
v IDE 0 [OIGITALVIOEO)
_YAMAHA
DVD CHANGER
LECTEUR
DE DVD CHANGEUR
DV-C6860
OWNER'S MANUAL
MODE D'EMPLOI
DXD ffi]D~@
v IDE 0 [OIGITALVIOEO)

IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
~
The lightning flash with arrowhead symbol,
~
within an equilateral triangle, is intended to alert
you to the presence
of uninsulated "dangerous
voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a
risk
of electric shock to persons.
.&
The exclamation point within an cquilateml
'
triangle is intended to alert you to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Read In.structions
~ All the safety and operating
mstructlons should be read
bdore the product is operated.
2Retain Instructions
~ The safety and operating instructions
should be retained for future reference.
Heed Warnings
~ All warnings on the product and in the
operating instruclions should be adhered to.
Follow Instructions
-_ .. All operating and use instructions
should be followed.
Cleaning
~ Unplug this product from the wall outlet before
cleaning.
Do not use liquid cleaners or aerosol cleaners. Use
adamp cloth for cleaning.
Attachments
~ Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
Water and Moisture
~ Do not use this product near water
- for example, near abath tub, wash bowl, kitchen sink, or
laundry tub; in awet basement; or
near a swimming pool;
and the like.
Accessories
~- Do not place this product on an unstable
cart, stand, tripod, bracket.
or table. The product may fall,
causing serious mjury to achild or adult, and serious
damage to the product. Use only with acart, stand, tripod,
bracket.
or table recommended by the manufacturer, or sold
with the product.
Any mounting
of the product should follow the
manufacturer's instructions, and should use amounting
accessory
recommended by the manufacturer.
Aproduct and
cart combination should be
moved with carc. Quick stops, excessive
<I
force, and uneven surfaces may cause the ."
product and cart combination to overturn. III ...l!
10 Ventilation -Slots and openings in the
cabinet are provided for ventilation and
to ensure reliable
operation
of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings
should never be blocked by placing the product on abcd, sofa,
rug, or other similar surface.
This product should not be placed
in abuilt-in installation such
as abookcase or rack unless proper vcntilation is provided or
the manufacturer's instructions have been adhered to.
11 Power Sources -This product should he operated only
from thc type
of power source indicated on the marking
labe1. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company.
For products intended to operate from battery power, or
other sources, refer to the operating instructions.
12 Grounding or Polarization-This product may be cquipped
with apolarized alternating current line plug (a plug having
one blade
wider than the other). This plug will fit into the
power outlet only one way. This is asafety feature. If you
arc unable to insert the plug fully into the outlet, try
reversing the plug.
If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet.
Do not
defeat the safety
purpose of the polarized plug.
13 Powcr-Cord Protection ~ Power-supply cords should be
routed so that they are not likely to be walked
on or pinched
by
lte~s placed upon or against them, paying particular
attention to cords at plugs, convenience reccptacles, and the
POInt where they exit from the product.
14
L~ight~ing -For added protection for this product during a
IIghtmng
stann, or when it is left unattended and unused for
long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damagc
to the product due to lightning and power-line surges.
15 Power Lines -An outside antenna svstem should not he
located in the vicinity
of overhead po~er lines or other electric
light or power circuits, or whcre
it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken
to keep from touching such
power lines or circuits
as contact with them might be fatal.
16 Overloading - Do not overload wall outlets, extension
cords, or integral
convenience receptacles as this can result
in arisk
of fire or electric shock.
17 Object and Liquid Entry - Never push objects of any kind
into this product through openings as thcy
may touch
dangerous voltagc points
or short-out parts that could result
in afire or clectric shOCk. 'lever spill liquid of any kind on
the product.
18 Servicing ~ Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangcrous voltage or other hazards. Refer all servicing to
qualified service personncl.
19 Damage Requiring Service-Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord
or plug is damaged,
b)
Ifliquid has been spilled, or objects have fallen into the
product,
c)
If the product has been exposed to rain or water,
d) Ifthe product does not operate nonnally by follO\ving the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment
of other controls may result in damage and
will often requirc extensive work by aqualified
technician to rcstore the product to its normal operation,
e)
If the product has been dropped or damaged in any
way, and
1) When the product exhibits adistinct change in
pcrformance -this indicates aneed for service.
20 Replacement Parts
~ When replacement parts are required,
be sure the service technician has used replacemcnt parts
specified by the manufacturer
or have the same characteristics
as the original part. Unauthorized substitutions may result
in
fire, electric shock, or other hazards.
21 Safety
Check - lipan completion of any service or repairs
to this product, ask the service technician
to perform safety
checks to
detennine that the product is in proper operating
condition.
22 Wall or Ceiling Mounting ~ The unit should be mounted to
awall or ceiling only as recommended by the manufacturer.
23 Heat -The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other
products (including amplifiers) that produce heal.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
~
The lightning flash with arrowhead symbol,
~
within an equilateral triangle, is intended to alert
you to the presence
of uninsulated "dangerous
voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a
risk
of electric shock to persons.
.&
The exclamation point within an cquilateml
'
triangle is intended to alert you to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Read In.structions
~ All the safety and operating
mstructlons should be read
bdore the product is operated.
2Retain Instructions
~ The safety and operating instructions
should be retained for future reference.
Heed Warnings
~ All warnings on the product and in the
operating instruclions should be adhered to.
Follow Instructions
-_ .. All operating and use instructions
should be followed.
Cleaning
~ Unplug this product from the wall outlet before
cleaning.
Do not use liquid cleaners or aerosol cleaners. Use
adamp cloth for cleaning.
Attachments
~ Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
Water and Moisture
~ Do not use this product near water
- for example, near abath tub, wash bowl, kitchen sink, or
laundry tub; in awet basement; or
near a swimming pool;
and the like.
Accessories
~- Do not place this product on an unstable
cart, stand, tripod, bracket.
or table. The product may fall,
causing serious mjury to achild or adult, and serious
damage to the product. Use only with acart, stand, tripod,
bracket.
or table recommended by the manufacturer, or sold
with the product.
Any mounting
of the product should follow the
manufacturer's instructions, and should use amounting
accessory
recommended by the manufacturer.
Aproduct and
cart combination should be
moved with carc. Quick stops, excessive
<I
force, and uneven surfaces may cause the ."
product and cart combination to overturn. III ...l!
10 Ventilation -Slots and openings in the
cabinet are provided for ventilation and
to ensure reliable
operation
of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings
should never be blocked by placing the product on abcd, sofa,
rug, or other similar surface.
This product should not be placed
in abuilt-in installation such
as abookcase or rack unless proper vcntilation is provided or
the manufacturer's instructions have been adhered to.
11 Power Sources -This product should he operated only
from thc type
of power source indicated on the marking
labe1. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company.
For products intended to operate from battery power, or
other sources, refer to the operating instructions.
12 Grounding or Polarization-This product may be cquipped
with apolarized alternating current line plug (a plug having
one blade
wider than the other). This plug will fit into the
power outlet only one way. This is asafety feature. If you
arc unable to insert the plug fully into the outlet, try
reversing the plug.
If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet.
Do not
defeat the safety
purpose of the polarized plug.
13 Powcr-Cord Protection ~ Power-supply cords should be
routed so that they are not likely to be walked
on or pinched
by
lte~s placed upon or against them, paying particular
attention to cords at plugs, convenience reccptacles, and the
POInt where they exit from the product.
14
L~ight~ing -For added protection for this product during a
IIghtmng
stann, or when it is left unattended and unused for
long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damagc
to the product due to lightning and power-line surges.
15 Power Lines -An outside antenna svstem should not he
located in the vicinity
of overhead po~er lines or other electric
light or power circuits, or whcre
it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken
to keep from touching such
power lines or circuits
as contact with them might be fatal.
16 Overloading - Do not overload wall outlets, extension
cords, or integral
convenience receptacles as this can result
in arisk
of fire or electric shock.
17 Object and Liquid Entry - Never push objects of any kind
into this product through openings as thcy
may touch
dangerous voltagc points
or short-out parts that could result
in afire or clectric shOCk. 'lever spill liquid of any kind on
the product.
18 Servicing ~ Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangcrous voltage or other hazards. Refer all servicing to
qualified service personncl.
19 Damage Requiring Service-Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord
or plug is damaged,
b)
Ifliquid has been spilled, or objects have fallen into the
product,
c)
If the product has been exposed to rain or water,
d) Ifthe product does not operate nonnally by follO\ving the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment
of other controls may result in damage and
will often requirc extensive work by aqualified
technician to rcstore the product to its normal operation,
e)
If the product has been dropped or damaged in any
way, and
1) When the product exhibits adistinct change in
pcrformance -this indicates aneed for service.
20 Replacement Parts
~ When replacement parts are required,
be sure the service technician has used replacemcnt parts
specified by the manufacturer
or have the same characteristics
as the original part. Unauthorized substitutions may result
in
fire, electric shock, or other hazards.
21 Safety
Check - lipan completion of any service or repairs
to this product, ask the service technician
to perform safety
checks to
detennine that the product is in proper operating
condition.
22 Wall or Ceiling Mounting ~ The unit should be mounted to
awall or ceiling only as recommended by the manufacturer.
23 Heat -The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other
products (including amplifiers) that produce heal.

FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated
in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC,
to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product
in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed In FCC Regulations, Part 15 for Class
"B' digital devices.
Corr.pliance with these requirements provides areasonable level of assurance that your use of this product
in aresidential
environment will not result
in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur
in all installations. If this product is found to be the source of interference, which can be determined by turning
the product "OFF" and "ON", please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that
is being affected by the interference.
Utilize power outlets that are
on different branch (circuit breaker or fuse) Circuits or install AC line filter/s.
In the case of radio or TV interference, relocatelreorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product.
If you can not locate the appropriate retailer. please contact Yamaha Electronics Corp., 6660 Orangethorpe
Ave. Buena Park, CA90622.
The above statements apply ONLY to lhose products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For ALifetime
YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your
equipment by playing
it at asafe level. One that lets the sound come through loud and clear without annoying blaring or
distortion -and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds
is often undetectable until it is too late, YAMAHA and the Electronic Industries
Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
ADVARSEL SY"LIC oc lJW"U(; 1.,\SF3STI<,\1 'v; v'.\) AI1"1"(1
LJN1)tr.'\ i:l)S:l·,·I-n~l.Sl;cF()R STR,'\L;i\;(i
ADVARSEL SY,\'U(, (llj LJ~YNL;(~ [.,\SUo(STJ{:\U;-"(i :"'_,H~ ~)f-K'iU
VAR':I'(~ SYI\'!.[(i on [(lSY:\[j(i 1_.·\SI'~RSTR"\: ,:\"IN(: X\R
DE~N:\ nE[, ,\1-{ (Jrr~A[) BLTR,\:<T;\ USTRA:.F.N
VARO !Av'·\.';T·\l:SSA Ol.f:T ALrllI:-',.\ r.,:;\KYV.\lJ.E J .. '\
:\''!\KYM/\TrO\-lALU~ I.i\SI-~~{ Sl\TEILYLLL AlA K:\fSO SAJTFS1J'.N
VORSICHT SJUJ'["il,\R"l:"D lSSJCHTB,\RE L\SEi{S' ~AJ:I.I:"("
WE;\,:-': .\HDl:(:Kll~(; (if:OIT:'--El N~CHT DEM STRAllt At.;SSU:-;~~;-';
DA'\GER ViSIBLE ""n \"VISJIlU: 1.,\SI'1{ RA''''\TI()~ \\HE"
OPf~N AV(JllJ IJIH.l:.cr !-XllOSUt]' -t'O Bf:.-\M
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE I
KLASS 1 LASER APPARAT I~I:I;
, PRODUIT LASER DE CLASSE 1U
h ... _-
LASER SAFETY
This unit em:Jloys a laser. Due to possible eye
i'ljury, only aqualified service person should
remove
the cover or attempt to service this deVice.
DANGER
l'his ~nit emits Visible laser radiation when open.
Avoid direct eye exposure to beam ..
When ThiS unit is plugged Into awall outlet do rot
place your eyes close to the opening of the disc
tray
and other openings or lOOK inside.
SECURITE LASER
L'appareil utilise un laser. En raison des risques de
blessure
des yeux, Ie retrait du couvercle ou ies
reparations de I'apparell devront etre cOI1fies
excluslvement a. un technicien d'entretien qualifie.
DANGER
Risque d'exposl:~ion au laser en cas d'ouverture.
Eviter
toute exposition au faisceau.
Lorsque cet appareil est branche a
la prise de
courant,
ne pas approcher les yeux de l'ouvert"Jre
du plateau changeur
et des autres ouvertures
pou: regarder al'lnterieur.
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated
in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC,
to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product
in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed In FCC Regulations, Part 15 for Class
"B' digital devices.
Corr.pliance with these requirements provides areasonable level of assurance that your use of this product
in aresidential
environment will not result
in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur
in all installations. If this product is found to be the source of interference, which can be determined by turning
the product "OFF" and "ON", please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that
is being affected by the interference.
Utilize power outlets that are
on different branch (circuit breaker or fuse) Circuits or install AC line filter/s.
In the case of radio or TV interference, relocatelreorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product.
If you can not locate the appropriate retailer. please contact Yamaha Electronics Corp., 6660 Orangethorpe
Ave. Buena Park, CA90622.
The above statements apply ONLY to lhose products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For ALifetime
YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your
equipment by playing
it at asafe level. One that lets the sound come through loud and clear without annoying blaring or
distortion -and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds
is often undetectable until it is too late, YAMAHA and the Electronic Industries
Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
ADVARSEL SY"LIC oc lJW"U(; 1.,\SF3STI<,\1 'v; v'.\) AI1"1"(1
LJN1)tr.'\ i:l)S:l·,·I-n~l.Sl;cF()R STR,'\L;i\;(i
ADVARSEL SY,\'U(, (llj LJ~YNL;(~ [.,\SUo(STJ{:\U;-"(i :"'_,H~ ~)f-K'iU
VAR':I'(~ SYI\'!.[(i on [(lSY:\[j(i 1_.·\SI'~RSTR"\: ,:\"IN(: X\R
DE~N:\ nE[, ,\R (Jrr~A[) BLTR,\:<T;\ USTRA:.F.N
VARO !Av'·\.';T·\l:SSA Ol.f:T ALrllI:-',.\ r.,:;\KYV.\lJ.E J .. '\
:\''!\KYM/\TrO\-lALU~ I.i\SI-~~{ Sl\TEILYLLL AlA K:\fSO SAJTFS1J'.N
VORSICHT SJUJ'["il,\R"l:"D lSSJCHTB,\RE L\SEi{S' ~AJ:I.I:"("
WE;\,:-': .\HDl:(:Kll~(; (if:OIT:'--El N~CHT DEM STRAllt At.;SSU:-;~~;-';
DA'\GER ViSIBLE ""D \"VISJIlU: 1.,\SI'1{ RA''''\TI()~ \\HE"
OPf~N AV(JllJ IJIH.l:.cr !-XllOSUt]' -t'O Bf:.-\M
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE I
KLASS 1 LASER APPARAT I~I:I;
, PRODUIT LASER DE CLASSE 1U
h ... _-
LASER SAFETY
This unit em:Jloys a laser. Due to possible eye
i'ljury, only aqualified service person should
remove
the cover or attempt to service this deVice.
DANGER
l'his ~nit emits Visible laser radiation when open.
Avoid direct eye exposure to beam ..
When ThiS unit is plugged Into awall outlet do rot
place your eyes close to the opening of the disc
tray
and other openings or lOOK inside.
SECURITE LASER
L'appareil utilise un laser. En raison des risques de
blessure
des yeux, Ie retrait du couvercle ou ies
reparations de I'apparell devront etre cOI1fies
excluslvement a. un technicien d'entretien qualifie.
DANGER
Risque d'exposl:~ion au laser en cas d'ouverture.
Eviter
toute exposition au faisceau.
Lorsque cet appareil est branche a
la prise de
courant,
ne pas approcher les yeux de l'ouvert"Jre
du plateau changeur
et des autres ouvertures
pou: regarder al'lnterieur.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
I
Model No.
Seria: No. _
CAUTION
Danger of explosion ifbattery is incorrectly replaced.
Replace only with the
same or equivalent type.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK,
DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
For Customer Use:
Read carefully the information located at the 'ear
panel of this unit and enter below the Serial No.
Retain this information for future reference,
Semiconductor laser GaAIAs
650 nm (DVD)
780 nm (VeD/CO)
7mW (OVD)
10 mW (VCO/CD)
60 degree Beam divergence
Output Power
LASER
Type
Wave length
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result
in hazardous radiation exposure.
FOR CANADIAN CUSTOMERS
To preventelectric shock, match wide blade of plug
to wide slot and fully insert.
This
Class Bdigital apparatus compiles With
Canadian ICES-003.
This digital apparatus does
not exceed the Class B
limits
for radiO nOise emiSSions from digital apparatus
as set out in the Radio Interference Regulations of
the Canadian Department of Communications,
15 Be sure to read the liTroubleshootlng" section on
common operating errors before concluding that
this unit is faulty.
16 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, and then disconnect
the AC power plug from the wall outlet
17 Install thiS unit nearthe wall outlet and where the
AC power plug can be reached easily.
Be sure to place this unit on alevel surface.
Ifyou do not do so, PLA YXCHANGE operation of
this unit will not function correctly, and may damage
the disc(s) and/or this unit itself.
To assure the finest performance, please read this
manual carefully. Keep it
in a safe place for future
reference.
2Install this
unit in awell ventilated, cool, dry, clean
place -away
from direct sunlight, heat sources,
vibration, dust. moisture,
or cold. In acabinet,
allow about 2.5cm
(1 inch) of free space ali
around this unit for adequate ventilation.
3Locate this unit away from otherelectrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature
changes
from cold to hot, nor locate thiS unit in
an environment With high humidity (i.e., a room
with ahumidifier) to prevent condensation inside
this unit, which may
cause an electrical shock, fire,
damage
to this unit, and/or personal injury.
5Avoid installing this unit where foreign objects
may
fall onto this unit and/or this unit may be
exposed
to liquid dripping or splashing. On the
top of this unit, do not place:
-
Other components, as theymay cause damage
and/or discoloration on the surface of this unit.
-Buming objects
(i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
-Containers
with liquid in them, as they may fall,
spilling the liquid and causi,ng an e!ectrical
shock
to the user and/or damage to thiS unit.
6 Do not coverthis unitwith anewspaper, tablecloth,
curtain,
etc. in order not to obstruct heat radiation.
Ifthe temperature Inside this unit
rises, it may cause
fire, damage to this unit, and/or personal inJUry.
7 Do not plug in this unit to awall outlet until all
connections are complete.
8 Do not operate thiS unit upSide-down. It may
overheat, possibly causing damage.
9 Do not use excessive force on SWitches, knobs
and/or cords.
10 When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; thiS
might damage the finish. Use aclean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with ahigher voltage than specified
is dangerous and may cause fire, damage to this
unit, and/or personal injury.
YAMAHA Will not be
held responsible
for any damage resulting from use
of this unit with avoltage otherthan as specified.
13 Do not attempt to modify orfix this unit. Contact
qualified YAMAHA service personnel when any
service
is needed. The cabinet should never be
opened
for any reason.
14 When not planning to use thiS unit for long
periods
of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
iii
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
I
Model No.
Seria: No. _
CAUTION
Danger of explosion ifbattery is incorrectly replaced.
Replace only with the
same or equivalent type.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK,
DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
For Customer Use:
Read carefully the information located at the 'ear
panel of this unit and enter below the Serial No.
Retain this information for future reference,
Semiconductor laser GaAIAs
650 nm (DVD)
780 nm (VeD/CO)
7mW (OVD)
10 mW (VCO/CD)
60 degree Beam divergence
Output Power
LASER
Type
Wave length
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result
in hazardous radiation exposure.
FOR CANADIAN CUSTOMERS
To preventelectric shock, match wide blade of plug
to wide slot and fully insert.
This
Class Bdigital apparatus compiles With
Canadian ICES-003.
This digital apparatus does
not exceed the Class B
limits
for radiO nOise emiSSions from digital apparatus
as set out in the Radio Interference Regulations of
the Canadian Department of Communications,
15 Be sure to read the liTroubleshootlng" section on
common operating errors before concluding that
this unit is faulty.
16 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, and then disconnect
the AC power plug from the wall outlet
17 Install thiS unit nearthe wall outlet and where the
AC power plug can be reached easily.
Be sure to place this unit on alevel surface.
Ifyou do not do so, PLA YXCHANGE operation of
this unit will not function correctly, and may damage
the disc(s) and/or this unit itself.
To assure the finest performance, please read this
manual carefully. Keep it
in a safe place for future
reference.
2Install this
unit in awell ventilated, cool, dry, clean
place -away
from direct sunlight, heat sources,
vibration, dust. moisture,
or cold. In acabinet,
allow about 2.5cm
(1 inch) of free space ali
around this unit for adequate ventilation.
3Locate this unit away from otherelectrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature
changes
from cold to hot, nor locate thiS unit in
an environment With high humidity (i.e., a room
with ahumidifier) to prevent condensation inside
this unit, which may
cause an electrical shock, fire,
damage
to this unit, and/or personal injury.
5Avoid installing this unit where foreign objects
may
fall onto this unit and/or this unit may be
exposed
to liquid dripping or splashing. On the
top of this unit, do not place:
-
Other components, as theymay cause damage
and/or discoloration on the surface of this unit.
-Buming objects
(i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
-Containers
with liquid in them, as they may fall,
spilling the liquid and causi,ng an e!ectrical
shock
to the user and/or damage to thiS unit.
6 Do not coverthis unitwith anewspaper, tablecloth,
curtain,
etc. in order not to obstruct heat radiation.
Ifthe temperature Inside this unit
rises, it may cause
fire, damage to this unit, and/or personal inJUry.
7 Do not plug in this unit to awall outlet until all
connections are complete.
8 Do not operate thiS unit upSide-down. It may
overheat, possibly causing damage.
9 Do not use excessive force on SWitches, knobs
and/or cords.
10 When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; thiS
might damage the finish. Use aclean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with ahigher voltage than specified
is dangerous and may cause fire, damage to this
unit, and/or personal injury.
YAMAHA Will not be
held responsible
for any damage resulting from use
of this unit with avoltage otherthan as specified.
13 Do not attempt to modify orfix this unit. Contact
qualified YAMAHA service personnel when any
service
is needed. The cabinet should never be
opened
for any reason.
14 When not planning to use thiS unit for long
periods
of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
iii

Introduction
Region codes 2
Supplied accessories 2
Notes on discs 2
Cleaning
discs 2
Patent information 2
Functional Overview
Front panel 3
Rear panel 4
Remote control 5
Preparation
General notes on connections 6
Digital connection 6
Analog connection 6
Video connections 7
Component video jacks <A> 7
S-video
jack <B> 7
Composite video
jack <C> 7
Getting Started
Inserting batteries into the remote control 8
Using the remote control 8
Turning on the power 9
About the auto standby function 9
Setting a TV type and display 9
Setting acolor system for your TV 9
Setting
an aspect ratio for your TV 10
Setting a language preference 11
Setting the OSD language 11
Setting the audio, subtitle and disc menu languages 11
Disc Operations
Basic playback , 12
General operation 12
Pausing playback 12
Selecting atrack/chapter 13
Searching backward/forward 13
Stopping playback 13
Selecting the various repeat/shuffle functions 13
Repeat : 13
Repeating asection within achapter/track 14
Shuffle (except DVD/VCD/SVCD) 14
Operations for video playback (DVDNCD/SVCD) 14
Using the disc menu 14
Slow motion 14
Zooming
in 15
Resuming playback from the
last stopped point 15
On-screen
display (OSD) 15
Special DVD features 16
Playing by title 16
Camera
angle 16
Audio 17
Subtitles 17
Contents
Special VCD & SVCD features 17
Playback control (PBC) 17
Audio CDs 17
Playing by discs 17
Playing MP3/JPEG/Kodak picture CDs 17
General operation 17
Selecting afolder and track/file 18
Special picture disc features 18
Preview function UPEG) 18
Zooming pictures 18
Playback with multi-angles 18
Scan effect 19
Playing MP3 music and JPEG pictures simultaneously 19
Setup Menu
General setup menu 20
Locking/Unlocking the disc for viewing 20
Dimming the front panel display 20
Programming
disc tracks and discs 20
OSD language 22
Screen saver 22
Sleep timer 22
Audio setup menu 22
Setting the analog output.. 23
Setting the digital output 23
CD upsampling 24
Night mode 24
Video setup menu 24
TV type 24
Setting the
TV display 25
Progressive 26
Picture settings :26
Selecting the
black level 27
Closed caption 27
Switching the yUV/S-video 28
Preference setup menu 28
Audio, subtitle and disc menu 28
Restricting playback with parental control 28
PBC (Playback control) 29
MP3/JPEG menu 29
Changing the password 30
Resetting the system 30
Language Code 31
Troubleshooting 33
Glossary 35
Specifications
37
Introduction
Region codes 2
Supplied accessories 2
Notes on discs 2
Cleaning
discs 2
Patent information 2
Functional Overview
Front panel 3
Rear panel 4
Remote control 5
Preparation
General notes on connections 6
Digital connection 6
Analog connection 6
Video connections 7
Component video jacks <A> 7
S-video
jack <B> 7
Composite video
jack <C> 7
Getting Started
Inserting batteries into the remote control 8
Using the remote control 8
Turning on the power 9
About the auto standby function 9
Setting a TV type and display 9
Setting acolor system for your TV 9
Setting
an aspect ratio for your TV 10
Setting a language preference 11
Setting the OSD language 11
Setting the audio, subtitle and disc menu languages 11
Disc Operations
Basic playback , 12
General operation 12
Pausing playback 12
Selecting atrack/chapter 13
Searching backward/forward 13
Stopping playback 13
Selecting the various repeat/shuffle functions 13
Repeat : 13
Repeating asection within achapter/track 14
Shuffle (except DVD/VCD/SVCD) 14
Operations for video playback (DVDNCD/SVCD) 14
Using the disc menu 14
Slow motion 14
Zooming
in 15
Resuming playback from the
last stopped point 15
On-screen
display (OSD) 15
Special DVD features 16
Playing by title 16
Camera
angle 16
Audio 17
Subtitles 17
Contents
Special VCD & SVCD features 17
Playback control (PBC) 17
Audio CDs 17
Playing by discs 17
Playing MP3/JPEG/Kodak picture CDs 17
General operation 17
Selecting afolder and track/file 18
Special picture disc features 18
Preview function UPEG) 18
Zooming pictures 18
Playback with multi-angles 18
Scan effect 19
Playing MP3 music and JPEG pictures simultaneously 19
Setup Menu
General setup menu 20
Locking/Unlocking the disc for viewing 20
Dimming the front panel display 20
Programming
disc tracks and discs 20
OSD language 22
Screen saver 22
Sleep timer 22
Audio setup menu 22
Setting the analog output.. 23
Setting the digital output 23
CD upsampling 24
Night mode 24
Video setup menu 24
TV type 24
Setting the
TV display 25
Progressive 26
Picture settings :26
Selecting the
black level 27
Closed caption 27
Switching the yUV/S-video 28
Preference setup menu 28
Audio, subtitle and disc menu 28
Restricting playback with parental control 28
PBC (Playback control) 29
MP3/JPEG menu 29
Changing the password 30
Resetting the system 30
Language Code 31
Troubleshooting 33
Glossary 35
Specifications
37

Introduction
Thank you for purchasing this unit. This
Owner's Manual explains the
basic
operation of this unit.
DVD discs must be labeled ALL
regions
or Region 1(U.S.A.
model)
in order to play on this
unit. You cannot
play discs
labeled for other regions.
Remote control
-
Two batteries (AA, R06, UM-3) for the
remote control
-
AudioNideo cable
-Owner's Manual
-This unit
is designed for use with the
following
discs: DVD-Video, Video CD,
Super Video CD, Audio CD, CD-R,
CD-RW, DVD+RW, DVD+R, DVD-R
and DVD-RW.
This unit can play:
-MP3 and picture (Kodak, JPEG) files
recorded on CD-R(W).
-:J PEG/ISO 9660 format
-Maximum 30 characters per display
CD-R and CD-RW cannot be played
unless finalized.
Some
discs cannot be played depending
on the recording conditions,
such as the
PC environment
and application
software.
The characteristics and
conditions of some discs (materials,
scratches, curvature, etc.) may result
in
playback failure.
Be sure to use only CD-R and CD-RW
discs made by reliable manufacturers.
Do not use any non-standard shaped
discs (heart-shaped, etc.).
2
Do not use discs with tape, seals, or
paste on their surface. Doing so may
damage this unit.
-
Do not use discs affixed with labels
p-rinted by acommercially available label
printer.
•
When a disc becomes dirty, clean it
with acleaning cloth.
Wipe the disc
from the center out. Do not wipe in a
circular motion.
•
Do not use solvents such as benzine,
thinner, commercially available cleaners,
or antistatic spray intended for analog
records.
()[] IDOLBYI Manufactured under license from
DIG I TAL Dolby Laboratories. "Dolby" and
the double-D symbol are
trademarks
of Dolby
Laborato ri es.
"DTS" and "DTS Digital Out" are
trademarks
of Digital Theater
Systems, Inc.
This productincorporates copyright protection
technology
that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and
other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation,
and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Introduction
Thank you for purchasing this unit. This
Owner's Manual explains the
basic
operation of this unit.
DVD discs must be labeled ALL
regions
or Region 1(U.S.A.
model)
in order to play on this
unit. You cannot
play discs
labeled for other regions.
Remote control
-
Two batteries (AA, R06, UM-3) for the
remote control
-
AudioNideo cable
-Owner's Manual
-This unit
is designed for use with the
following
discs: DVD-Video, Video CD,
Super Video CD, Audio CD, CD-R,
CD-RW, DVD+RW, DVD+R, DVD-R
and DVD-RW.
This unit can play:
-MP3 and picture (Kodak, JPEG) files
recorded on CD-R(W).
-:J PEG/ISO 9660 format
-Maximum 30 characters per display
CD-R and CD-RW cannot be played
unless finalized.
Some
discs cannot be played depending
on the recording conditions,
such as the
PC environment
and application
software.
The characteristics and
conditions of some discs (materials,
scratches, curvature, etc.) may result
in
playback failure.
Be sure to use only CD-R and CD-RW
discs made by reliable manufacturers.
Do not use any non-standard shaped
discs (heart-shaped, etc.).
2
Do not use discs with tape, seals, or
paste on their surface. Doing so may
damage this unit.
-
Do not use discs affixed with labels
p-rinted by acommercially available label
printer.
•
When a disc becomes dirty, clean it
with acleaning cloth.
Wipe the disc
from the center out. Do not wipe in a
circular motion.
•
Do not use solvents such as benzine,
thinner, commercially available cleaners,
or antistatic spray intended for analog
records.
()[] IDOLBYI Manufactured under license from
DIG I TAL Dolby Laboratories. "Dolby" and
the double-D symbol are
trademarks
of Dolby
Laborato ri es.
"DTS" and "DTS Digital Out" are
trademarks
of Digital Theater
Systems, Inc.
This productincorporates copyright protection
technology
that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and
other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation,
and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.

Functional Overview
CD ®
G)YAMAHAI~II ~~l,=~~~=v,.~.o ~~~~~=II 1~
CD Disc tray
Loads up to 5discs in the disc tray.
® ~ (OPEN/CLOSE)
Opens or closes the disc tray.
® PLAYXCHANGE
Reloads or unloads discs without
interrupting current disc playback.
@ • (STOP)
Stops playback.
® ~/II (PLAY/PAUSE)
Starts or pauses playback.
®~/~
Searches forward.*
Moves
to the next chapter or track.
(J) , .... / ....
Searches backward.*
Moves
to the previous chapter or track.
® Front panel display
Shows the current status of this unit.
®DISC (1, 2, 3, 4, 5) /LEDs
Selects and directly plays back the preferred
disc.
Each LED lights up in orange when this unit
recognizes
that the corresponding disc has
been loaded.
@ STANDBY/ON
Turns on this unit or sets it to the standby
mode.
While this unit
is in the standby mode, it
consumes asmall amount of power.
* Press the button for about two seconds.
Functional Overview
CD ®
G)YAMAHAI~II ~~l,=~~~=v,.~.o ~~~~~=II 1~
CD Disc tray
Loads up to 5discs in the disc tray.
® ~ (OPEN/CLOSE)
Opens or closes the disc tray.
® PLAYXCHANGE
Reloads or unloads discs without
interrupting current disc playback.
@ • (STOP)
Stops playback.
® ~/II (PLAY/PAUSE)
Starts or pauses playback.
®~/~
Searches forward.*
Moves
to the next chapter or track.
(J) , .... / ....
Searches backward.*
Moves
to the previous chapter or track.
® Front panel display
Shows the current status of this unit.
®DISC (1, 2, 3, 4, 5) /LEDs
Selects and directly plays back the preferred
disc.
Each LED lights up in orange when this unit
recognizes
that the corresponding disc has
been loaded.
@ STANDBY/ON
Turns on this unit or sets it to the standby
mode.
While this unit
is in the standby mode, it
consumes asmall amount of power.
* Press the button for about two seconds.

Functional Overview
G) AUDIO OUT (L/R) jacks
Connect to the audio input jacks of your
AV receiver or stereo system.
® DIGITAL OUT - COAXIAL jack
Connect to the coaxial input jack of your
AV receiver.
® VIDEO OUT - COMPONENT
(Y/PB/PR) jacks
Connect to the component input jacks of
your AV receiver.
@ VIDEO OUT - S VIDEO jack
Connect to the S-video input jack of your
AV receiver.
® VIDEO OUT - VIDEO jack
Connect to the composite video input jack
of your AV receiver.
® AC power cord
Connect to astandard AC outlet.
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.
Electrostatic discharge
may cause permanent damage to this unit.
4
Functional Overview
G) AUDIO OUT (L/R) jacks
Connect to the audio input jacks of your
AV receiver or stereo system.
® DIGITAL OUT - COAXIAL jack
Connect to the coaxial input jack of your
AV receiver.
® VIDEO OUT - COMPONENT
(Y/PB/PR) jacks
Connect to the component input jacks of
your AV receiver.
@ VIDEO OUT - S VIDEO jack
Connect to the S-video input jack of your
AV receiver.
® VIDEO OUT - VIDEO jack
Connect to the composite video input jack
of your AV receiver.
® AC power cord
Connect to astandard AC outlet.
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.
Electrostatic discharge
may cause permanent damage to this unit.
4

®VAMAHA
G) <!>/I
Turns on this unit or sets it to the
standby mode.
® TOP MENU/RETURN
Displays the top-level disc menu (DVD).
Moves back
to the previous menu (DVD*/
VCD).
®MENU
Accesses the menu of adisc (DVD).
Switches PBC
on or off (VCD).
® "'/~/"/T
Selects an item in the currently displayed
menu. Search
or slow playback.
ENTER/OK
Confirms the menu selection.
®~
Searches backward.*
Moves to the previous chapter or track.
Functional Overview
® STOP (.)
Stops playback.
(j) SUBTITLE
Selects the subtitle language.
® ANGLE
Selects the DVD camera angle.
® REPEAT
Repeats the chapter, track, title, disc or
all discs.
@A-B
Repeats aspecific segment.
@ Numeric buttons (0-9)
Selects numbered items in the currently
displayed menu.
@ ON SCREEN
Accesses
or exits from the on-screen
display (OSD) menu of this unit.
@ SETUP
Accesses or exits from the setup menu
of this unit.
@~
Searches forward.*
Moves
to the next chapter or track.
@) PLAY (~)
Starts playback.
@ PAUSE (II)
Pauses playback temporarily.
Frame-by-frame playback.
@ AUDIO
Selects the audio language or format.
@ZOOM
Enlarges the video image.
@ DISC SKIP
Selects another disc.
@ SHUFFLE
Plays tracks in arandom order.
* Press and hold the button for about two
seconds.
5
®VAMAHA
G) <!>/I
Turns on this unit or sets it to the
standby mode.
® TOP MENU/RETURN
Displays the top-level disc menu (DVD).
Moves back
to the previous menu (DVD*/
VCD).
®MENU
Accesses the menu of adisc (DVD).
Switches PBC
on or off (VCD).
® "'/~/"/T
Selects an item in the currently displayed
menu. Search
or slow playback.
ENTER/OK
Confirms the menu selection.
®~
Searches backward.*
Moves to the previous chapter or track.
Functional Overview
® STOP (.)
Stops playback.
(j) SUBTITLE
Selects the subtitle language.
® ANGLE
Selects the DVD camera angle.
® REPEAT
Repeats the chapter, track, title, disc or
all discs.
@A-B
Repeats aspecific segment.
@ Numeric buttons (0-9)
Selects numbered items in the currently
displayed menu.
@ ON SCREEN
Accesses
or exits from the on-screen
display (OSD) menu of this unit.
@ SETUP
Accesses or exits from the setup menu
of this unit.
@~
Searches forward.*
Moves
to the next chapter or track.
@) PLAY (~)
Starts playback.
@ PAUSE (II)
Pauses playback temporarily.
Frame-by-frame playback.
@ AUDIO
Selects the audio language or format.
@ZOOM
Enlarges the video image.
@ DISC SKIP
Selects another disc.
@ SHUFFLE
Plays tracks in arandom order.
* Press and hold the button for about two
seconds.
5

Preparation
Never make or change connections with
the power of this unit turned on.
•Depending
on the component you wish
to connect, there are various ways to
make connections. Possible connections
are described below.
•Refer
to the manuals of your other
components as necessary to make the
best connections.
•
Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
•
Do not connect the audio out jack of
this unit to the phono in jack of your
audio system. .
This unit has acoaxial digital
out jack.
Connect DIGITAL OUT -COAXIAL jack
of this unit to your AV receiver equipped
with aDolby Digital, DTS,
or MPEG
decoder using acommercially available
cable.
D~DDDu
6
You need to set "DIGITAL
OUTPUT" to "ALL" (see "DIGITAL
OUTPUT" on page 23).
Notes:
-" Ifthe audio format of the digital output
does not match the capabilities of your
receiver, the receiver produces a distorted
sound or no sound at all. Make sure to
select the appropriate audio format from
the menu screen on the disc.
Pressing AUDIO on the remote control once
or more may change not only the audio
language but also the audio format. The
selected format appears in the front panel
display for several seconds.
-If you wish to enjoy Dolby Digital, D TS, and
MPEG formats, you must connect this unit
to an AV receiver that supports these
formats.
This unit has analog output jacks.
Connect AUDIO OUT (L/R) jacks of this
unit
to the corresponding input jacks of
your audio component (such as a stereo
amplifier) using the supplied audio cable.
Preparation
Never make or change connections with
the power of this unit turned on.
•Depending
on the component you wish
to connect, there are various ways to
make connections. Possible connections
are described below.
•Refer
to the manuals of your other
components as necessary to make the
best connections.
•
Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
•
Do not connect the audio out jack of
this unit to the phono in jack of your
audio system. .
This unit has acoaxial digital
out jack.
Connect DIGITAL OUT -COAXIAL jack
of this unit to your AV receiver equipped
with aDolby Digital, DTS,
or MPEG
decoder using acommercially available
cable.
D~DDDu
6
You need to set "DIGITAL
OUTPUT" to "ALL" (see "DIGITAL
OUTPUT" on page 23).
Notes:
-" Ifthe audio format of the digital output
does not match the capabilities of your
receiver, the receiver produces a distorted
sound or no sound at all. Make sure to
select the appropriate audio format from
the menu screen on the disc.
Pressing AUDIO on the remote control once
or more may change not only the audio
language but also the audio format. The
selected format appears in the front panel
display for several seconds.
-If you wish to enjoy Dolby Digital, D TS, and
MPEG formats, you must connect this unit
to an AV receiver that supports these
formats.
This unit has analog output jacks.
Connect AUDIO OUT (L/R) jacks of this
unit
to the corresponding input jacks of
your audio component (such as a stereo
amplifier) using the supplied audio cable.

If your AV receiver has video output jacks,
connect
your receiver and then your TV
so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching
the input source selector
of your AV receiver.
This
unit has three types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be
connected.
Preparation
Component video jacks <A>
Component video connections achieve
higher fidelity
color reproduction than
S-video connections by transmitting video
signals on separate wires
for luminance
(Y: green) and chrominance
(PB: blue,
PR: red).
Connect VIDEO OUT - COMPONENT
(Y IPB/PR) jacks of this unit to component
inputjacks of your AV receiverand then to
those of your TV using acommercially
available
component cable. Observe the
color of each jack when you make
connections.
If your AV receiver does not
have component output jacks, you can
achieve a better video image by connecting
the component output jacks of this unit
directly to the component input jacks of
your TV.
S-video jack <8>
S-video connections achieve aclearer
picture than composite video connections
by transmitting video signals on separate
wires
for luminance (Y) and chrominance
(C).
Connect VIDEO OUT - S VIDEO jack of
this unit to S-video input jack of your AV
receiver and then to that of your TV using
acommercially available S-video cable.
Note:
- In the default setting, the S VIDEO jack
does not output video signals. Set "YUVIS"
to "S-VIDEO" (see "Switching the YUVIS-
video" on page 28).
Composite video jack <C>
Connect VIDEO OUT - VIDEO jack of this
unit to the video input jack of your AV
receiver and then to that of your TV using
the supplied video cable.
7
If your AV receiver has video output jacks,
connect
your receiver and then your TV
so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching
the input source selector
of your AV receiver.
This
unit has three types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be
connected.
Preparation
Component video jacks <A>
Component video connections achieve
higher fidelity
color reproduction than
S-video connections by transmitting video
signals on separate wires
for luminance
(Y: green) and chrominance
(PB: blue,
PR: red).
Connect VIDEO OUT - COMPONENT
(Y IPB/PR) jacks of this unit to component
inputjacks of your AV receiverand then to
those of your TV using acommercially
available
component cable. Observe the
color of each jack when you make
connections.
If your AV receiver does not
have component output jacks, you can
achieve a better video image by connecting
the component output jacks of this unit
directly to the component input jacks of
your TV.
S-video jack <8>
S-video connections achieve aclearer
picture than composite video connections
by transmitting video signals on separate
wires
for luminance (Y) and chrominance
(C).
Connect VIDEO OUT - S VIDEO jack of
this unit to S-video input jack of your AV
receiver and then to that of your TV using
acommercially available S-video cable.
Note:
- In the default setting, the S VIDEO jack
does not output video signals. Set "YUVIS"
to "S-VIDEO" (see "Switching the YUVIS-
video" on page 28).
Composite video jack <C>
Connect VIDEO OUT - VIDEO jack of this
unit to the video input jack of your AV
receiver and then to that of your TV using
the supplied video cable.
7

Getting Started
1 Open the battery compartment.
2Insert
the two supplied batteries (AA, R06,
UM-3) following
the indications (+/-)
inside
the compartment.
3Close the cover.
Notes:
Insert batteries correctly according to the
polarity markings (+/-). The batteries
inserted in the opposite direction may leak.
- Replace the exhausted batteries
immediately with new ones to prevent a
leakage.
Remove the botteries from the
compartment if the remote control is not
used for more than a month.
If the batteries have leaked, dispose of
them immediately. Avoid touching the
leaked material or letting it come into
contact with clothing, etc. Clean the battery
compartment thoroughly before installing
new batteries.
Do not use old batteries together with new
ones.
Do not use different types of batteries (such
as alkaline and manganese batteries)
together. Read the packaging carefully as
these different types of batteries may have
the same shape and color.
Dispose of the batteries correctly in
accordance with your local regulations.
8
Using the remote control
Point the remote control at
the remote control sensor,
within approximately 6 m
(20 ft) from
the unit.
~
000
000
000
000
000
0000
cooo
Handling the remote control
Do not spill water or other liquids on
the remote control.
Do not drop the remote control.
Do not leave or store the remote
control in the following types of
conditions:
places
of high humidity, such as near a
bath
places
of high temperature, such as near
a
heater or stove
places
of extremely low temperatures
dusty places
Getting Started
1 Open the battery compartment.
2Insert
the two supplied batteries (AA, R06,
UM-3) following
the indications (+/-)
inside
the compartment.
3Close the cover.
Notes:
Insert batteries correctly according to the
polarity markings (+/-). The batteries
inserted in the opposite direction may leak.
- Replace the exhausted batteries
immediately with new ones to prevent a
leakage.
Remove the botteries from the
compartment if the remote control is not
used for more than a month.
If the batteries have leaked, dispose of
them immediately. Avoid touching the
leaked material or letting it come into
contact with clothing, etc. Clean the battery
compartment thoroughly before installing
new batteries.
Do not use old batteries together with new
ones.
Do not use different types of batteries (such
as alkaline and manganese batteries)
together. Read the packaging carefully as
these different types of batteries may have
the same shape and color.
Dispose of the batteries correctly in
accordance with your local regulations.
8
Using the remote control
Point the remote control at
the remote control sensor,
within approximately 6 m
(20 ft) from
the unit.
~
000
000
000
000
000
0000
cooo
Handling the remote control
Do not spill water or other liquids on
the remote control.
Do not drop the remote control.
Do not leave or store the remote
control in the following types of
conditions:
places
of high humidity, such as near a
bath
places
of high temperature, such as near
a
heater or stove
places
of extremely low temperatures
dusty places

Connect the AC power cord to an AC
outlet.
2 Turn on your TV and AV receiver.
3Select
the appropriate input source of the
AV receiver connected to this unit. Refer
to the manual supplied with your AV
receiver for details.
4
Turn on this unit.
S
Set the TV to the correct Video IN
channel. (e.g. EXT1, EXT2, AV1, AV2,
AUDIONIDEO, etc. Refer to the manual
supplied with
your TV for details.
~ The front panel display lights up and the
default screen appears on the TV.
About the auto standby function
This unit is automatically set to the standby
mode when disc playback is stopped or
paused for more than 30 minutes.
When "SCREEN SAVER" is set to
"ON" (see page 22):
The background is displayed when disc
playback
is stopped or the paused picture
is displayed for 15 minutes.
Getting Started
When "SCREEN SAVER" is set to
"OFF" (see page 22):
The background or the paused picture is'
displayed for 30 minutes.
~
This unit is set to the standby mode.
Setting a color system for your
TV
This unit is compatible with both NTSC
and
PAL video formats. Select the color
system that matches your TV.
~
The screen saver is displayed for 15 minutes.
Background
OR
Example of a
paused
picture
1Press SETUP.
2Press ~ repeatedly to select "VIDEO
SETUP PAGE".
3Press
.. IT to highlight [TV TYPE], and
then press ~.
4Press .. IT to highlight one of the following
options.
~
This unit is set to the standby mode.
9
Connect the AC power cord to an AC
outlet.
2 Turn on your TV and AV receiver.
3Select
the appropriate input source of the
AV receiver connected to this unit. Refer
to the manual supplied with your AV
receiver for details.
4
Turn on this unit.
S
Set the TV to the correct Video IN
channel. (e.g. EXT1, EXT2, AV1, AV2,
AUDIONIDEO, etc. Refer to the manual
supplied with
your TV for details.
~ The front panel display lights up and the
default screen appears on the TV.
About the auto standby function
This unit is automatically set to the standby
mode when disc playback is stopped or
paused for more than 30 minutes.
When "SCREEN SAVER" is set to
"ON" (see page 22):
The background is displayed when disc
playback
is stopped or the paused picture
is displayed for 15 minutes.
Getting Started
When "SCREEN SAVER" is set to
"OFF" (see page 22):
The background or the paused picture is'
displayed for 30 minutes.
~
This unit is set to the standby mode.
Setting a color system for your
TV
This unit is compatible with both NTSC
and
PAL video formats. Select the color
system that matches your TV.
~
The screen saver is displayed for 15 minutes.
Background
OR
Example of a
paused
picture
1Press SETUP.
2Press ~ repeatedly to select "VIDEO
SETUP PAGE".
3Press
.. IT to highlight [TV TYPE], and
then press ~.
4Press .. IT to highlight one of the following
options.
~
This unit is set to the standby mode.
9

Getting Started
PAL
Select this if the connected TV is a PAL
system TV. It will change the video signals
of NTSC discs and output them in PAL'
format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
formats (such as amulti-system TV). The
output format will be in accordance with
the video signals of the disc.
NTSC
Selectthis if the connected TV is an NTSC
system
TV. It will change the video signals
of PAL discs and output them in NTSC
format.
SSelect an item, and
then press
ENTER/OK to confirm your selection.
Notes:
-Before changing the current TV
standardsetting, ensure that yourTV
supports
the selected TV type.
- If the picture is not displayed
properly on your TV, wait for 15
seconds for this unit to activate
automatic recovery.
Setting an aspect ratio for your
TV
You can set the aspect ratio of this unit to
match your TV. If the aspect ratio of your
TV is 4:3, you do not need to change this
setting.
If you have a widescreen TV,
change this setting according
to the
following procedure.
For details, see "Setting the TV display" on
page 25.
1Press
SETUP.
2Press ~ repeatedly to select "VIDEO
SETUP PAGE".
3Press Jt../T
to highlight [TV DISPLAY], and
then press ~.
4Press Jt../Y to highlight [16:9], and then
press ENTER/OK to confirm the
selection.
10
Getting Started
PAL
Select this if the connected TV is a PAL
system TV. It will change the video signals
of NTSC discs and output them in PAL'
format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
formats (such as amulti-system TV). The
output format will be in accordance with
the video signals of the disc.
NTSC
Selectthis if the connected TV is an NTSC
system
TV. It will change the video signals
of PAL discs and output them in NTSC
format.
SSelect an item, and
then press
ENTER/OK to confirm your selection.
Notes:
-Before changing the current TV
standardsetting, ensure that yourTV
supports
the selected TV type.
- If the picture is not displayed
properly on your TV, wait for 15
seconds for this unit to activate
automatic recovery.
Setting an aspect ratio for your
TV
You can set the aspect ratio of this unit to
match your TV. If the aspect ratio of your
TV is 4:3, you do not need to change this
setting.
If you have a widescreen TV,
change this setting according
to the
following procedure.
For details, see "Setting the TV display" on
page 25.
1Press
SETUP.
2Press ~ repeatedly to select "VIDEO
SETUP PAGE".
3Press Jt../T
to highlight [TV DISPLAY], and
then press ~.
4Press Jt../Y to highlight [16:9], and then
press ENTER/OK to confirm the
selection.
10

You can select your own preferred
language settings. This unit automatically
switches
to your preferred language
whenever you load adisc. If the selected
language is not available on the disc, the
default language of the disc will be used
instead.
The OSD language in the system
menu remains
once selected.
Setting the OSD language
1Press SETUP.
2Press ..... 1 ~ to select "GENERAL SETUP
PAGE".
3Press
~/T to highlight [OSD
LANGUAGE], and
then press ~.
4Press ~/T to select alanguage, and then
press ENTER/OK to confirm your
selection.
Getting Started
Setting the audio, subtitle and
disc menu languages
Press STOP (.) twice, and then press
SETUP.
2Press ~ repeatedly to select
"PREFERENCE PAGE".
3Press
~/T to highlight one of the options
below
at atime, and then press ~.
-AUDIO (audio language)
-SUBTITLE (subtitle language)
-DISC MENU (disc menu language)
4Press
~/T to select alanguage, and then
press ENTER/OK to confirm your
selection.
If the language you want is not in the
list, select [OTHERS],
and then use the numeric buttons (0-9)
on the remote control to enter the 4-digit
language
code (see "Language Code" on
page 31), and then press ENTER/OK to
confirm the code.
SRepeat
steps 3-4 for other language
settings.
11
You can select your own preferred
language settings. This unit automatically
switches
to your preferred language
whenever you load adisc. If the selected
language is not available on the disc, the
default language of the disc will be used
instead.
The OSD language in the system
menu remains
once selected.
Setting the OSD language
1Press SETUP.
2Press ..... 1 ~ to select "GENERAL SETUP
PAGE".
3Press
~/T to highlight [OSD
LANGUAGE], and
then press ~.
4Press ~/T to select alanguage, and then
press ENTER/OK to confirm your
selection.
Getting Started
Setting the audio, subtitle and
disc menu languages
Press STOP (.) twice, and then press
SETUP.
2Press ~ repeatedly to select
"PREFERENCE PAGE".
3Press
~/T to highlight one of the options
below
at atime, and then press ~.
-AUDIO (audio language)
-SUBTITLE (subtitle language)
-DISC MENU (disc menu language)
4Press
~/T to select alanguage, and then
press ENTER/OK to confirm your
selection.
If the language you want is not in the
list, select [OTHERS],
and then use the numeric buttons (0-9)
on the remote control to enter the 4-digit
language
code (see "Language Code" on
page 31), and then press ENTER/OK to
confirm the code.
SRepeat
steps 3-4 for other language
settings.
11

Disc Operations
IMPORTANT!
5
To stop playback, press. (S'TOP) on the
-If
the inhibition icon «(S) or X)
front panel or STOP (.) on the remote
appears on the TV screen when acontrol.
button is pressed, the function for
To play back aspecific disc directly,
that button is not available on the
press DISC SKIP repeatedly on the
current disc or at the current time.
remote control or press DISC (1, 2, 3,
-
Depending on the DVD or VIDEO
4, 5) on the front panel.
CD disc, some operations may
Press PLA YXCHANGE on the front
operate differently or be
panel to open the disc tray, and then
restricted.
reload or unload discs without
-
Do not push on the disc tray or put
interrupting current disc playback.
any objects other than discs on the
Playback stops after all discs have been
disc tray. Doing so may cause the
played.
disc player to malfunction.
When the disc tray is open, press
~/Il (PLAY/PAUSE),
~ (OPEN/CLOSE),
PLA YXCHANGE or
DISC (1, 2, 3, 4, 5) to close the disc
Press
STANDBY/ON on the front panel
tray automatically.
or ~ / I on the remote control.
2Press ~
(OPEN/CLOSE) on the front
panel to open the disc tray.
3Place discs
in the disc tray with the printed Unless
stated otherwise, all operations
side up. described
here are carried out using the
supplied remote control.
Pausing playback
During playback, press PAUSE (II) .
... Playback is paused and the sound is
muted.
4Press
~/Il (PLAY/PAUSE) on the front
2Press
PAUSE (II) again to select the next
panel or PLAY~) on the remote
picture frame.
control. 3
To resume normal playback, press
... The disc tray closes and playback starts
PLAY~) .
automatically for all of the loaded discs
in the tray in sequence.
12
Disc Operations
IMPORTANT!
5
To stop playback, press. (S'TOP) on the
-If
the inhibition icon «(S) or X)
front panel or STOP (.) on the remote
appears on the TV screen when acontrol.
button is pressed, the function for
To play back aspecific disc directly,
that button is not available on the
press DISC SKIP repeatedly on the
current disc or at the current time.
remote control or press DISC (1, 2, 3,
-
Depending on the DVD or VIDEO
4, 5) on the front panel.
CD disc, some operations may
Press PLA YXCHANGE on the front
operate differently or be
panel to open the disc tray, and then
restricted.
reload or unload discs without
-
Do not push on the disc tray or put
interrupting current disc playback.
any objects other than discs on the
Playback stops after all discs have been
disc tray. Doing so may cause the
played.
disc player to malfunction.
When the disc tray is open, press
~/Il (PLAY/PAUSE),
~ (OPEN/CLOSE),
PLA YXCHANGE or
DISC (1, 2, 3, 4, 5) to close the disc
Press
STANDBY/ON on the front panel
tray automatically.
or ~ / I on the remote control.
2Press ~
(OPEN/CLOSE) on the front
panel to open the disc tray.
3Place discs
in the disc tray with the printed Unless
stated otherwise, all operations
side up. described
here are carried out using the
supplied remote control.
Pausing playback
During playback, press PAUSE (II) .
... Playback is paused and the sound is
muted.
4Press
~/Il (PLAY/PAUSE) on the front
2Press
PAUSE (II) again to select the next
panel or PLAY~) on the remote
picture frame.
control. 3
To resume normal playback, press
... The disc tray closes and playback starts
PLAY~) .
automatically for all of the loaded discs
in the tray in sequence.
12

Selecting a track/chapter
•Press ~ I ~ or use the numeric
buttons (0-9) to selectatrack! chapter
number.
•During
repeated playback of atrack!
chapter, press
~ I ~ to replay the
same track/chapter.
Searching backward/forward
1Press and hold ~ I ~ or press ..... /~.
2While searching, press ~ I ~ or
..... / ~ repeatedly to select the desired
speed.
3
To resume normal playback, press
PLAY~).
Notes:
- ..... / ~ key may not be available with some
discs.
- For MP3 and WMA, the search function
allows you to search the track currently
being played.
Stopping playback
•Press STOP (.).
Disc Operations
Repeat
Repeating chapter/title/disc (DVD)
Each tirne you press REPEAT, the display
changes as follows:
r ~ CHAPTER ~ ~ TITLE ~
L REPEAT OFF +- ~ ALL DISC +- ~ DISC .J
~ CHAPTER*: repeats the current
chapter
~ TITLE: repeats the current title
~ DISC*: repeats the entire disc
~ ALL DISC: repeats all discs loaded in
the tray
REPEAT OFF: exits from the repeat mode
* This feature may not be available with some
discs.
Repeating track/disc (except DVD)
Each time you press REPEAT, the display
changes as follows;
[
~ TRACK ~ ~ DISC
REPEAT OFF -- 0ALL DIS;]
~ TRACK: repeats the current track
~ DISC: repeats the entire disc
~ ALL DISC: repeats all discs loaded in
the tray
REPEAT OFF: exits from the repeat mode
Notes:
-When only one disc is available in the disc
tray, it is continuously played when ~
ALL DISC is selected.
- For VCD, repeat playback is not available
when the PBC mode is selected.
13
Selecting a track/chapter
•Press ~ I ~ or use the numeric
buttons (0-9) to selectatrack! chapter
number.
•During
repeated playback of atrack!
chapter, press
~ I ~ to replay the
same track/chapter.
Searching backward/forward
1Press and hold ~ I ~ or press ..... /~.
2While searching, press ~ I ~ or
..... / ~ repeatedly to select the desired
speed.
3
To resume normal playback, press
PLAY~).
Notes:
- ..... / ~ key may not be available with some
discs.
- For MP3 and WMA, the search function
allows you to search the track currently
being played.
Stopping playback
•Press STOP (.).
Disc Operations
Repeat
Repeating chapter/title/disc (DVD)
Each titne you press REPEAT, the display
changes as follows:
r ~ CHAPTER ~ ~ TITLE ~
L REPEAT OFF +- ~ ALL DISC +- ~ DISC .J
~ CHAPTER*: repeats the current
chapter
~ TITLE: repeats the current title
~ DISC*: repeats the entire disc
~ ALL DISC: repeats all discs loaded in
the tray
REPEAT OFF: exits from the repeat mode
* This feature may not be available with some
discs.
Repeating track/disc (except DVD)
Each time you press REPEAT, the display
changes as follows;
[
~ TRACK ~ ~ DISC
REPEAT OFF -- 0ALL DIS;]
~ TRACK: repeats the current track
~ DISC: repeats the entire disc
~ ALL DISC: repeats all discs loaded in
the tray
REPEAT OFF: exits from the repeat mode
Notes:
-When only one disc is available in the disc
tray, it is continuously played when ~
ALL DISC is selected.
- For VCD, repeat playback is not available
when the PBC mode is selected.
13

Disc Operations
Repeating a section within a
chapter/track
While playing adisc, press A-B at the
desired starting point.
2Press A-B again at the desired end point.
• A and Bcan only be
set within the same
chapter/track.
... The selected section repeats
continuously.
3 To exit from the sequence, press A-B.
Shuffle (except DVDNCD/SVCD)
With the shuffle function, you can play
tracks in a random order.
During playback, press SHUFFLE
repeatedly to select between SHUFFLE
DISC, SHUFFLE
ALL DISC, and SHUFFLE
OFF.
... The selected mode appears in the front
panel display for several seconds.
•
In the SHUFFLE DISC mode, all tracks
on the disc currently playing are played
in a random order.
• In the SHUFFLE ALL DISC mode, tracks
from all discs are played in a random
order:
- If the disc currently playing is a CD, only
tracks from CDs will be played.
-
If the disc currently playing is formatted
in MP3 or WMA, tracks on the disc
currently playing are played in a random
order. When all the tracks on that disc
have
been played, shuffle playback
continues with
the next disc.
Using the disc menu
Depending on the disc, amenu may appear
on the TV screen once you load the disc.
To select a playback feature or item
• Use ..... ' ~'A'''' or the numeric
buttons (0-9) on the remote control,
and then press ENTER/OK to start
playback.
To access or exit from the menu
•Press MENU on the remote control.
Slow motion
You can play back in slow motion.
Press
... for reverse slow motion or • for
forward slow motion.
2During
slow motion, press ... ,.
repeatedly to select the desired speed.
3
To resume normal playback, press
PLAY~).
Note:
- Reverse slow motion is not available for
VCDs and SVCDs.
14
Disc Operations
Repeating a section within a
chapter/track
While playing adisc, press A-B at the
desired starting point.
2Press A-B again at the desired end point.
• A and Bcan only be
set within the same
chapter/track.
... The selected section repeats
continuously.
3 To exit from the sequence, press A-B.
Shuffle (except DVDNCD/SVCD)
With the shuffle function, you can play
tracks in a random order.
During playback, press SHUFFLE
repeatedly to select between SHUFFLE
DISC, SHUFFLE
ALL DISC, and SHUFFLE
OFF.
... The selected mode appears in the front
panel display for several seconds.
•
In the SHUFFLE DISC mode, all tracks
on the disc currently playing are played
in a random order.
• In the SHUFFLE ALL DISC mode, tracks
from all discs are played in a random
order:
- If the disc currently playing is a CD, only
tracks from CDs will be played.
-
If the disc currently playing is formatted
in MP3 or WMA, tracks on the disc
currently playing are played in a random
order. When all the tracks on that disc
have
been played, shuffle playback
continues with
the next disc.
Using the disc menu
Depending on the disc, amenu may appear
on the TV screen once you load the disc.
To select a playback feature or item
• Use ..... ' ~'A'''' or the numeric
buttons (0-9) on the remote control,
and then press ENTER/OK to start
playback.
To access or exit from the menu
•Press MENU on the remote control.
Slow motion
You can play back in slow motion.
Press
... for reverse slow motion or • for
forward slow motion.
2During
slow motion, press ... ,.
repeatedly to select the desired speed.
3
To resume normal playback, press
PLAY~).
Note:
- Reverse slow motion is not available for
VCDs and SVCDs.
14

Zooming in
This function allows you to enlarge or
lessen the picture on the TV screen and
pan through
the enlarged picture.
During playback, press ZOOM repeatedly
to display the picture at different scales.
•Use .... ' ~'A'. to pan through the
enlarged picture.
-. Playback continues.
2Press
ZOOM repeatedly to return to the
original size.
Resuming playback from the last
stopped point
You can resume playback of the last 10
discs, even if the discs were ejected or the
power of this unit was turned off.
Load one of the last 10 discs.
-. "LOADING #" (#: the disc tray number
(1-5)) appears on the TV screen.
2Press
PLAY~) while "LOADING #" is
displayed on the TV screen.
.. "RESUME PLAY" appears on the TV
screen and the disc is played back from
the last point.
To cancel the resume mode
• When playback is stopped, press
STOP (.) again.
Disc Operations
On-screen display (050)
The OSD menu shows disc playback
information (e.g.,
the title or chapter
number, elapsed playing time or audio/
subtitle language). A
number of operations
are possible without interrupting disc
playback.
During playback, press
ON SCREEN.
-. Alist of available disc information
appears on the TV screen.
DVD
VCD/SVCD
2Press Jti..r"" to view the information, and
then press ENTER/OK to access the
selected item.
3Use the numeric buttons (0-9) to input
the number/time or press Jti../T to make a
selection, and
then press ENTER/OK to
confirm the selection.
-. Playback changes to the selected time
or to the selected title/chapter/track.
15
Zooming in
This function allows you to enlarge or
lessen the picture on the TV screen and
pan through
the enlarged picture.
During playback, press ZOOM repeatedly
to display the picture at different scales.
•Use .... ' ~'A'. to pan through the
enlarged picture.
-. Playback continues.
2Press
ZOOM repeatedly to return to the
original size.
Resuming playback from the last
stopped point
You can resume playback of the last 10
discs, even if the discs were ejected or the
power of this unit was turned off.
Load one of the last 10 discs.
-. "LOADING #" (#: the disc tray number
(1-5)) appears on the TV screen.
2Press
PLAY~) while "LOADING #" is
displayed on the TV screen.
.. "RESUME PLAY" appears on the TV
screen and the disc is played back from
the last point.
To cancel the resume mode
• When playback is stopped, press
STOP (.) again.
Disc Operations
On-screen display (050)
The OSD menu shows disc playback
information (e.g.,
the title or chapter
number, elapsed playing time or audio/
subtitle language). A
number of operations
are possible without interrupting disc
playback.
During playback, press
ON SCREEN.
-. Alist of available disc information
appears on the TV screen.
DVD
VCD/SVCD
2Press Jti..r"" to view the information, and
then press ENTER/OK to access the
selected item.
3Use the numeric buttons (0-9) to input
the number/time or press Jti../T to make a
selection, and
then press ENTER/OK to
confirm the selection.
-. Playback changes to the selected time
or to the selected title/chapter/track.
15

Disc Operations
Title/Chapter/Track selection Repeat/Time display (DVDNCD)
(DVDNCD)
Press ./. to select [REPEAT] or [TIME
Press ./. to select [TITLE] or
DISP.].
[CHAPTER] (DYD)
or [TRACK] (YCD). 2Press
ENTER/OK to confirm the
2Press
ENTER/OK to confirm the
selection.
selection. 3Press
./. to highlight your selection, and
3Select atitle,
chapter or track number
then press ENTER/OK.
using the numeric buttons (0-9).
Time display (CD)
Time search (DVDNCD)
Each time you press ON SCREEN, the
Press ./. to select [TT TIME] or [CH
time display changes as follows:
TIME] (DYD) or [TRACK TIME] or [DISC [TOTAL
ELAPSED -----. TOTAL REMAIN J
TIME] (YCD).
.[TTTIME] refers
to the total time of the
SINGLE REMAIN +--- SINGLE ELAPSED
current title, and [CH TIME] refers to
the total time of the current chapter.
2Press
ENTER/OK to confirm the
selection.
3
Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9) Playing
by title
(e.g. 0:34:27). Press
MENU .
Audio/Subtitle/Angle (DVD)
... The disc title menu appears on the TV
You can change [AUDIO], [SUBTITLE]
or
screen.
[ANGLE] if these functions are available on
2Use
.... , ~'A'T or the numeric buttons
the disc you are playing. (0-9)
to select aplayback option.
Press
./. to select [AUDIO], 3Press
ENTER/OK to confirm your
[SUBTITLE] or [ANGLE]. selection.
2Press ENTER/OK to confirm the
selection.
Camera angle
3
For Audio and Subtitle: .Press
ANGLE repeatedly to select the
Press ./. to highlight your selection, and desired angle.
then press ENTER/OK.
OR
For Angle:
Select an angle using
the numeric
buttons (0-9).
16
Disc Operations
Title/Chapter/Track selection Repeat/Time display (DVDNCD)
(DVDNCD)
Press ./. to select [REPEAT] or [TIME
Press ./. to select [TITLE] or
DISP.].
[CHAPTER] (DYD)
or [TRACK] (YCD). 2Press
ENTER/OK to confirm the
2Press
ENTER/OK to confirm the
selection.
selection. 3Press
./. to highlight your selection, and
3Select atitle,
chapter or track number
then press ENTER/OK.
using the numeric buttons (0-9).
Time display (CD)
Time search (DVDNCD)
Each time you press ON SCREEN, the
Press ./. to select [TT TIME] or [CH
time display changes as follows:
TIME] (DYD) or [TRACK TIME] or [DISC [TOTAL
ELAPSED -----. TOTAL REMAIN J
TIME] (YCD).
.[TTTIME] refers
to the total time of the
SINGLE REMAIN +--- SINGLE ELAPSED
current title, and [CH TIME] refers to
the total time of the current chapter.
2Press
ENTER/OK to confirm the
selection.
3
Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9) Playing
by title
(e.g. 0:34:27). Press
MENU .
Audio/Subtitle/Angle (DVD)
... The disc title menu appears on the TV
You can change [AUDIO], [SUBTITLE]
or
screen.
[ANGLE] if these functions are available on
2Use
.... , ~'A'T or the numeric buttons
the disc you are playing. (0-9)
to select aplayback option.
Press
./. to select [AUDIO], 3Press
ENTER/OK to confirm your
[SUBTITLE] or [ANGLE]. selection.
2Press ENTER/OK to confirm the
selection.
Camera angle
3
For Audio and Subtitle: .Press
ANGLE repeatedly to select the
Press ./. to highlight your selection, and desired angle.
then press ENTER/OK.
OR
For Angle:
Select an angle using
the numeric
buttons (0-9).
16