Yamaha Acoustic Manual

EFFECT LIST

2
Effect Type List
EFFECT TYPE Display Description
Distortion Distortion Advanced distortion. Mainly used for direct connection to guitar
amp’s front input.
Digital Distortion DigiDistortion Distortion effect. Mainly used for direct connection to guitar amp’s
front input.
Amp Simulator AmpSimulator DG Series amp sound. Mainly used for direct connection to power
amp. Speaker simulator allows direct recording.
Chorus Chorus Chorus effect.
Symphonic Symphonic Symphonic effect.
Flange Flange Flange effect.
Vintage Flange VintageFlanger Flanger produced by utilizing VCM (Virtual Circuitry Modeling) tech-
nology.
Phaser Phaser Maximum 16-stage phaser.
Mono Vintage Phaser MonoVntagPhaser Monaural phaser produced by utilizing VCM (Virtual Circuitry Model-
ing) technology.
Stereo Vintage Phaser StreoVintPhaser Stereo phaser produced by utilizing VCM (Virtual Circuitry Modeling)
technology.
Tremolo Tremolo Tremolo effect.
Auto Pan Auto Pan Autopanner.
Rotary Rotary Rotary speaker simulator.
Ring Mod. RingMod. Ring modulator.
Mod. Filter Mod.Filter Modulation filter.
Compressor Compressor Compressor.
M.Band Dyna. MultiBandDyna. 3-band dynamics processor.
Dyna. Filter Dyna.Filter Filter effect. The effect changes according to input level.
Dyna. Flange Dyna.Flange Flanger effect. The effect changes according to input level.
Dyna. Phaser Dyna.Phaser Phaser effect. The effect changes according to input level.
Tape Echo TapeEcho Vintage tape echo.
Mono Delay MonoDelay Basic monaural delay.
Stereo Delay StereoDelay Basic stereo delay.
Mod. Delay Mod.Delay Basic repeat delay with modulation.
Delay LCR DelayLCR 3-tap delay (left, center, right).
Echo Echo Stereo delay with crossed feedback loop.
8 Band Parallel Delay 8BandParaDelay 8-band modulation delay connected in parallel.
8 Band Series Delay 8BandSeriDelay 8-band modulation delay connected in series.
4 Band 2 Tap Mod.
Delay 4Band2TapModDly 4-band delay connected in parallel w/2 multi-tap modulation delays.
2 Band 4 Tap Mod.
Delay 2Band4TapM.Dly 2-band delay connected in parallel w/4 multi-tap modulation delay.
8 Multi Tap Mod. Delay 8MultiTapM.Dly 8 Multi tap modulation delay.
2 Band Long + 4 Short
Mod. Delay 2Lng4ShrtM.Dly 2 band parallel 2 multi tap + 4 band short modulation delay.
Short + Medium + Long
Mod. Delay S.M.L.ModDly 3 band multi tap delay w/3 delay times.
Reverb Reverb Hall, room, stage, and plate reverb simulations, all with gates.
Early Ref. Early Ref. Early reflections.

3
Gate Reverb Gate Reverb Early reflections with gate.
Reverse Gate Reverse Gate Early reflections with reverse gate.
Spring Reverb Spring Reverb Spring reverb simulation.
HQ. Pitch HQ. Pitch High-quality pitch shifter.
Dual Pitch DualPitch Pitch shifter.
3 Band Parametric EQ 3BandParaEQ 3-band parametric equalizer.
Multi Filter MultiFilter 3-band multi-filter (24 dB/octave).
Reverb+Chorus Reverb+Chorus Reverb and chorus effects in parallel.
Reverb->Chorus Reverb->Chorus Reverb and chorus effects in series.
Reverb+Flange Reverb+Flange Reverb and flanger effects in parallel.
Reverb->Flange Reverb->Flange Reverb and flanger effects in series.
Reverb+Symphonic Reverb+Sympho Reverb and symphonic effects in parallel.
Reverb->Symphonic Reverb->Sympho Reverb and symphonic effects in series.
Reverb->Pan Reverb->Pan Reverb and autopan effects in series.
Delay+Early Ref. Delay+E.Ref. Delay and early reflections effects in parallel.
Delay->Early Ref. Delay->E.Ref. Delay and early reflections effects in series.
Delay+Reverb Delay+Reverb Delay and reverb effects in parallel.
Delay->Reverb Delay->Reverb Delay and reverb effects in series.
Distortion->Delay Dist->Delay Distortion and delay effects in series. Mainly used for direct connec-
tion to guitar amp’s front input.
Amp Multi (Chorus) AmpMulti(Cho)
Multi effect consisting of Comp + Amp Simulator + Chorus + Delay +
Reverb. Mainly used for direct connection to power amp. Speaker
simulator allows direct recording.
Amp Multi (Flange) AmpMulti(Flng)
Multi effect consisting of Comp + Amp Simulator + Flanger + Delay +
Reverb. Mainly used for direct connection to power amp. Speaker
simulator allows direct recording.
Amp Multi (Tremolo) AmpMulti(Trem)
Multi effect consisting of Comp + Amp Simulator + Tremolo + Delay +
Reverb. Mainly used for direct connection to power amp. Speaker
simulator allows direct recording.
Amp Multi (Phaser) AmpMulti(Phas)
Multi effect consisting of Comp + Amp Simulator + Phaser + Delay +
Reverb. Mainly used for direct connection to power amp. Speaker
simulator allows direct recording.
Distortion Multi
(Chorus) DistMulti (Cho) Multi effect consisting of Comp + Distortion + Chorus + Delay + Reverb. Mainly used for direct connection to guitar amp’s front input.
Distortion Multi
(Flange) DistMulti(Flng) Multi effect consisting of Comp + Distortion + Flanger + Delay + Reverb. Mainly used for direct connection to guitar amp’s front input.
Distortion Multi
(Tremolo) DistMulti(Trem) Multi effect consisting of Comp + Distortion + Tremolo + Delay + Reverb. Mainly used for direct connection to guitar amp’s front input.
Distortion Multi
(Phaser) DistMulti(Phas) Multi effect consisting of Comp + Distortion + Phaser + Delay + Reverb. Mainly used for direct connection to guitar amp’s front input.
Acoustic Multi AcousticMulti Multi effect for electric-acoustic guitar.
EFFECT TYPE Display Description

4
Effect Parameters
Distortion
Advanced distortion. Mainly used for direct connection to guitar amp’s front input.
Digital Distortion
Distortion effect. Mainly used for direct connection to guitar amp’s front input.
Parameter Display Range Description
Type TYPE
Lead1, Lead2, Drive1, Drive2,
Crunch1, Crunch2, Fuzz1,
Fuzz2, Distortion1, Distortion2,
Overdrive1, Overdrive2, Tube,
Solidstate
Distortion type
Gain GAIN 0.0 to 10.0 Adjusts the amount of distortion
Master MSTR 0.0 to 10.0 Adjusts the volume
Tone TONE 0.0 to 10.0 Adjusts the tone
EQ 1 Freq. EQ1F 50.0 to 400 Hz Specifies the post effect EQ1 frequency
EQ 1 Gain EQ1G -12.0 to 12.0 dB Specifies the post effect EQ1 gain
EQ 1 Q EQ1Q 0.100 to 20.0 Specifies the post effect EQ1 Q (bandwidth)
EQ 2 Freq. EQ2F 200 to 1.60 kHz Specifies the post effect EQ2 frequency
EQ 2 Gain EQ2G -12.0 to 12.0 dB Specifies the post effect EQ2 gain
EQ 2 Q EQ2Q 0.100 to 20.0 Specifies the post effect EQ2 Q (bandwidth)
EQ 3 Freq. EQ3F 600 to 4.80 kHz Specifies the post effect EQ3 frequency
EQ 3 Gain EQ3G -12.0 to 12.0 dB Specifies the post effect EQ3 gain
EQ 3 Q EQ3Q 0.100 to 20.0 Specifies the post effect EQ3 Q (bandwidth)
EQ 4 Freq. EQ4F 2.00 k to 16.0 kHz Specifies the post effect EQ4 frequency
EQ 4 Gain EQ4G -12.0 to 12.0 dB Specifies the post effect EQ4 gain
EQ 4 Q EQ4Q 0.100 to 20.0 Specifies the post effect EQ4 Q (bandwidth)
Pre EQ Level PELV 0.0 to 10.0 Specifies the pre effect EQ level
Pre EQ 1 Freq. PE1F 50.0 to 500 Hz Specifies the pre effect EQ1 frequency
Pre EQ 1 Gain PE1G -12.0 to 12.0 dB Specifies the pre effect EQ1 gain
Pre EQ 1 Q PE1Q 0.100 to 20.0 Specifies the pre effect EQ1 Q (bandwidth)
Pre EQ 2 Freq. PE2F 200 to 2.00 kHz Specifies the pre effect EQ2 frequency
Pre EQ 2 Gain PE2G -12.0 to 12.0 dB Specifies the pre effect EQ2 gain
Pre EQ 2 Q PE2Q 0.100 to 20.0 Specifies the pre effect EQ2 Q (bandwidth)
Pre EQ 3 Freq. PE3F 1.00 k to 10 kHz Specifies the pre effect EQ3 frequency
Pre EQ 3 Gain PE3G -12.0 to 12.0 dB Specifies the pre effect EQ3 gain
Pre EQ 3 Q PE3Q 0.100 to 20.0 Specifies the pre effect EQ3 Q (bandwidth)
N. G. Threshold NGTH 0.0 to 10.0 Level at which the noise gate activates
N. G. Attack NGAT 0 to 120 ms Time required for the noise gate to open after signal exceeds threshold
N. G. Hold NGHL 0.02 to 2040 ms Time noise gate stays open
N. G. Decay NGDC 6 to 44500 ms Time required for the noise gate to close after signal goes below thresh-
old
Parameter Display Range Description
Type TYPE
Distortion1, Distortion2,
Overdrive1, Overdrive2,
Crunch
Distortion type
Drive DRV 0 to 100 Distortion drive
Master MSTR 0 to 100 Master volume
Tone TONE –10 to +10 Tone
Noise Gate NG 0 to 20 Noise reduction

5
Amp Simulator
DG Series amp sound. Mainly used for direct connection to power amp.
Speaker simulator allows direct recording.
Chorus
Chorus effect.
Symphonic
Symphonic effect.
Parameter Display Range Description
Amp Type AMP
Heavy1, Heavy2, Lead1, Lead2,
Drive1, Drive2, Crunch1,
Crunch2, Clean1, Clean2, Solid
Amp type
Gain GAIN 0.0 to 10.0 Adjusts the amount of distortion
Master MSTR 0.0 to 10.0 Adjusts the volume
Tone TONE 0.0 to 10.0 Adjusts the tone
Treble TRE 0.0 to 10.0 Adjusts level of high range frequencies
High Middle HMID 0.0 to 10.0 Adjusts level of upper mid frequencies
Low Middle LMID 0.0 to 10.0 Adjusts level of lower mid frequencies
Bass BASS 0.0 to 10.0 Adjusts level of low frequencies
Presence PRE 0.0 to 10.0 Adjusts level of extremely high frequencies
Speaker
Simulator SP
Off, American 412, British 412,
Modern 412, YAMAHA 412, Hybrid
412, American 212, British 212,
Modern 212, YAMAHA 212, Hybrid
212, American 112, Modern 112,
YAMAHA 112, Hybrid 112, 410,
210
When using a line connection to connect directly to a mixer, this can be
used to simulate the natural characteristics of a speaker giving the tone
a more natural sound
N. G. Threshold NGTH 0.0 to 10.0 Level at which the noise gate activates
N. G. Attack NGAT 0 to 120 ms Time required for the noise gate to open after signal exceeds threshold
N. G. Hold NGHL 0.02 to 2040 ms Time noise gate stays open
N. G. Decay NGDC 6 to 44500 ms Time required for the noise gate to close after signal goes below thresh-
old
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
AM Depth AMDP 0 to 100% Amplitude modulation depth
PM Depth PMDP 0 to 100% Pitch modulation depth
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
EQ Freq. EQ.F 100 Hz to 8.00 kHz EQ (peaking type) frequency
EQ Gain EQ.G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q EQ.Q 10.0 to 0.10 EQ (peaking type) bandwidth
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Depth DPT 0 to 100% Modulation depth
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
EQ Freq. EQ.F 100 Hz to 8.00 kHz EQ (peaking type) frequency
EQ Gain EQ.G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q EQ.Q 10.0 to 0.10 EQ (peaking type) bandwidth
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Mix MIX 0 to 100% Mix level

6
Flange
Flange effect.
Vintage Flange
Flanger produced by utilizing VCM (Virtual Circuitry Modeling) technology.
Phaser
Maximum 16-stage phaser.
Mono Vintage Phaser
Monaural phaser produced by utilizing VCM (Virtual Circuitry Modeling) technology.
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Depth DPT 0 to 100% Modulation depth
FB. Gain FB –99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
EQ Freq. EQ.F 100 Hz to 8.00 kHz EQ (peaking type) frequency
EQ Gain EQ.G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q EQ.Q 10.0 to 0.10 EQ (peaking type) bandwidth
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Type TYPE 1, 2, 3 Flanger type
Speed SPD 0.0 to 10.0 Modulation speed
Depth DPTH 0.0 to 10.0 Modulation depth
Manual MANU 0.0 to 10.0 Adjusts flanger’s delay time
Feedback FB 0.0 to 10.0 Feedback gain
Spread SPRD 0.0 to 10.0 Left and right flange spread (diffusion)
Mix MIX 0.0 to 10.0 Mix level
Parameter Display Range Description
Stage STAG 2, 4, 6, 8, 10, 12, 14, 16 Number of phase shift stages
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Depth DPT 0 to 100% Modulation depth
FB. Gain FB –99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Offset OFST 0 to 100 Lowest phase-shifted frequency offset
Phase PHAS 0.00 to 354.38 degrees Left and right modulation phase balance
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Stage STAG 4, 6, 8, 10, 12, 16 Number of phase shift stages
Mode MODE 1, 2 Phaser type
Speed SPD 0.0 to 10.0 Modulation speed
Depth DPTH 0.0 to 10.0 Modulation depth
Manual MANU 0.0 to 10.0 Sets the manner in which the phaser acts
Feedback FB 0.0 to 10.0 Feedback gain
Color CLOR 0.0 to 10.0 Sets the phaser’s tone

7
Stereo Vintage Phaser
Stereo phaser produced by utilizing VCM (Virtual Circuitry Modeling) technology.
Tremolo
Tremolo effect.
Auto Pan
Autopanner.
Rotary
Rotary speaker simulator.
Parameter Display Range Description
Stage STAG 4, 6, 8, 10 Number of phase shift stages
Mode MODE 1, 2 Phaser type
Speed SPD 0.0 to 10.0 Modulation speed
Depth DPTH 0.0 to 10.0 Modulation depth
Manual MANU 0.0 to 10.0 Sets the manner in which the phaser acts
Feedback FB 0.0 to 10.0 Feedback gain
Color CLOR 0.0 to 10.0 Sets the phaser’s tone
Spread SPRD 0.0 to 10.0 Left and right phaser spread (diffusion)
Parameter Display Range Description
Wave WAVE Sine, Triangle, Square Modulation waveform
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Depth DPTH 0 to 100% Modulation depth
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
EQ Freq. EQ.F 100 Hz to 8.00 kHz EQ (peaking type) frequency
EQ Gain EQ.G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q EQ.Q 10.0 to 0.10 EQ (peaking type) bandwidth
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Parameter Display Range Description
Wave WAVE Sine, Triangle, Square Modulation waveform
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Depth DPTH 0 to 100% Modulation depth
Direction DIR L<->R, L—>R, L<—R, Turn L,
Turn R Panning direction
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
EQ Freq. EQ.F 100 Hz to 8.00 kHz EQ (peaking type) frequency
EQ Gain EQ.G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q EQ.Q 10.0 to 0.10 EQ (peaking type) bandwidth
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Parameter Display Range Description
Rotate ROT Stop, Start Rotation stop, start
Slow SLOW 0.05 to 10.00 Hz Slow rotation speed
Fast FAST 0.05 to 10.00 Hz Fast rotation speed
Speed SPD Slow, Fast Rotation speed (see Slow and Fast parameters)
Drive DRV 0 to 100 Overdrive level
Accel ACCL 0 to 10 Acceleration at speed changes
Low LOW 0 to 100 Low-frequency filter
High HIGH 0 to 100 High-frequency filter
Mix MIX 0 to 100% Mix level

8
Ring Mod.
Ring modulator.
Mod. Filter
Modulation filter.
Compressor
Compressor.
Parameter Display Range Description
Source SRC OSC, SELF Modulation source: oscillator or input signal
OSC Freq. OSC 0.0 to 5000.0 Hz Oscillator frequency
FM Freq. FM.F 0.05 to 40.00 Hz Oscillator frequency modulation speed
FM Depth FM.D 0 to 100% Oscillator frequency modulation depth
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Type TYPE Low Pass Filter, High Pass Filter,
Band Pass Filter Filter type: low pass, high pass, band pass
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Depth DPTH 0 to 100% Modulation depth
Phase PHAS 0.00 to 354.38 degrees Left-channel modulation and right-channel modulation phase differ-
ence
Offset OFST 0 to 100 Filter frequency offset
Resonance RESO 0 to 20 Filter resonance
Level LEVL 0 to 100 Output level
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Comp. Threshold THRE -54.0 to 0.0 dB Level at which compressor activates
Comp. Ratio RATI 1:1 to ∞:1 Compression ratio
Comp. Attack ATAK0to 120 ms Time required for compressor to peak after exceeding threshold
Comp. Release RELE 6 to 11500 ms Time required for compressor to terminate after going below threshold
Comp. Knee KNEE Hard, 1 to 5 Adjusts the width of the gain curve just above the threshold
Comp. Gain GAIN 0.0 to 18.0 dB Output level

9
M.Band Dyna.
3-band dynamics processor, with individual solo and gain reduction metering for each band.
Dyna. Filter
Filter effect. The effect changes according to input level.
Dyna. Flange
Flanger effect. The effect changes according to input level.
Parameter Display Range Description
Slope SLOP –6, –12 dB Filter slope
Low Gain LO.G –96.0 to +12.0 dB Low band level
Mid Gain MI.G –96.0 to +12.0 dB Mid band level
High Gain HI.G –96.0 to +12.0 dB High band level
Lookup LKUP 0.0 to 100.0 ms Lookup delay
Ceiling CEIL –6.0 to 0.0 dB, Off Specifies the maximum output level
L–M Xover L-MX 21.2 Hz to 8.00 kHz Low/mid crossover frequency
M–H Xover M-HX 21.2 Hz to 8.00 kHz Mid/high crossover frequency
Presence PRE –10 to +10
For positive values, the threshold of the high band is lowered and the
threshold of the low band is increased. For negative values, the oppo-
site will occur. When set to 0, all three bands are affected the same.
Comp. Bypass COMP Off, On Compressor bypass
Comp. Threshold CMPT –24.0 to 0.0 dB Compressor threshold
Comp. Ratio CRAT 1:1 to 20:1 Compressor ratio
Comp. Attack CATA 0 to 120 ms Compressor attack
Comp. Release CREL 6 to 11500 ms Compressor release time
Comp. Knee CKNE 0 to 5 Adjusts the width of the gain curve just above the compressor‘s thresh-
old
Exp. Bypass EXP Off, On Expander bypass
Exp. Threshold EXPT –54.0 to –24.0 dB Expander threshold
Exp. Ratio ERAT 1:1 to ∞:1 Expander ratio
Exp. Release EREL 6 to 11500 ms Expander release time
Lim. Bypass LIM Off, On Limiter bypass
Lim. Threshold LIMT –12.0 to 0.0 dB Limiter threshold
Lim. Attack LATA 0 to 120 ms Limiter attack
Lim. Release LREL 6 to 11500 ms Limiter release time
Lim. Knee LKNE 0 to 5 Adjusts the width of the gain curve just above the limiter‘s threshold
Parameter Display Range Description
Type TYPE Low Pass Filter, High Pass Filter,
Band Pass Filter Filter type
Decay DCY 6 to 46000 ms Filter frequency change decay speed
Direction DIR Up, Down Upward or downward frequency change
Sense SENS 0 to 100 Sensitivity
Offset OFST 0 to 100 Filter frequency offset
Resonance RESO 0 to 20 Filter resonance
Level LVL0to 100 Output level
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Decay DCY 6 to 46000 ms Decay speed
FB. Gain FB –99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Direction DIR Up, Down Upward or downward frequency change
Sense SENS 0 to 100 Sensitivity
Offset OFST 0 to 100 Delay time offset
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
EQ Freq. EQ.F 100 Hz to 8.00 kHz EQ (peaking type) frequency
EQ Gain EQ.G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q EQ.Q 10.0 to 0.10 EQ (peaking type) bandwidth
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Mix MIX 0 to 100% Mix level

10
Dyna. Phaser
Phaser effect. The effect changes according to input level.
Tape Echo
Vintage tape echo.
Mono Delay
Basic repeat delay.
Stereo Delay
Basic stereo delay.
Parameter Display Range Description
Decay DCY 6 to 46000 ms Decay speed
FB. Gain FB –99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Direction DIR Up, Down Upward or downward frequency change
Sense SENS 0 to 100 Sensitivity
Offset OFST 0 to 100 Lowest phase-shifted frequency offset
Stage STAG 2, 4, 6, 8, 10, 12, 14, 16 Number of phase shift stages
LSH Freq. LSHF 21.2 Hz to 8.00 kHz Low shelving filter frequency
LSH Gain LSHG –12.0 to +12.0 dB Low shelving filter gain
HSH Freq. HSHF 50.0 Hz to 16.0 kHz High shelving filter frequency
HSH Gain HSHG –12.0 to +12.0 dB High shelving filter gain
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Time DT 0.0 to 10.0 Delay time
Feedback FB 0.0 to 10.0 Delay feedback level
Level LEVL 0.0 to 10.0 Delay level
Parameter Display Range Description
Delay TIME 0.0 to 2730.0 ms Delay time
FB. Gain FB –99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
High Ratio HRAT 0.1 to 1.0 High-frequency feedback ratio
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Delay L DT.L 0.0 to 1350.0 ms Left channel delay time
Delay R DT.R 0.0 to 1350.0 ms Right channel delay time
FB. Gain L FB.L –99 to +99% Left channel feedback (plus values for normal-phase feedback, minus
values for reverse-phase feedback)
FB. Gain R FB.R –99 to +99% Right channel feedback (plus values for normal-phase feedback, minus
values for reverse-phase feedback)
High Ratio HRAT 0.1 to 1.0 High-frequency feedback ratio
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Mix MIX 0 to 100% Mix level