Yamesmile BC218 User manual

1

2

3
Care and maintenance

4

5
1
2
3
3
1
2

6
First step Foot tube installation
Second step Transverse tube installation
Third step Bottom hosting installation
Height adjustment tube
Foot tube
Slot
First, turn the height
adjustment tube on one side
into 90 degrees, as shown
in the figure.
Insert the height
adjustment tube into the
foot tube.
There is a marble in the
foot tube. Press the marble to
push the height adjustment
tube for fixing.
When the foot tube on one
side is installed, the other
side is the same operation.
Insert the two feet of the bottom support into the slots inside the foot tube.
Make sure two feet have inserted the bottom of the buckle.
1
1
1
1
1
2
1
2
3
2
2
3

7
Bed rail
Velcro
Side
buckle
Place the bed rail in the bed frame.
Make sure that the side with “Yamesmile”
and the side with buckle are in the same
direction.
Zip up starting from the buckles.
Buckle the protection cloth cover.
Tighten the velcros at the bottom.
Congratulations, the crib installation
steps have been completed here.
1
4
3
2
2
3
4
1

8
Push the button under the tube
The top border can be separated
Zip down one side
The same step on the other side
Flip the side down under the
bed rail and buckle the buttons
5
4
3
2
1
1
2
3
4
5

9
7
6
5
1 2
3
4
6
4
3
5
1 2
7
7

10

11

12

13
Clean the crib with a slightly damp cloth, and then wipe off the water stains with a dry cloth;
Do not use bleach to prevent the residue from being ingested by infants.
Frequently touch the edge of the bed and the fence to see if there are foreign objects that will
affect the infant.
Do not expose the crib to strong sunlight for extended periods of time, exposed to ultraviolet
light under for long time may cause the fabric to fade.
Regularly check whether the crib is working properly or not.
When you find any parts in the crib that are damaged. do not use the crib and contact us
immediately.
Care and maintenance