h5
Ø6x70 x4
Ø6x50
h16
x4 Ø10x13 x4
J
x
Ø8x32
f5
2
EQUIPMENT
SCHEME OF ECCENTRIC ASSEMBLY
123
0 10 20 30 40 50 60 70 80 90 100 1 10 120 130 140 150 mm
3/11
x8
B
symbol
quantity
dimensions
b2
x8
Ø7x70
x4
Ø6x35
h3
x4
M8x50
H4
x4
f6
Ø8x50
a1
x8
a3
x8
GLUE
x1
The thickness of the mattress shall be such that the internal height (surface of the mattress to the upper edge of the cot frame) is at
t no screws are loose, a child could trap parts
In the cots with drawers and removable dowels, after removing dowels, always remember that drawer should be closed.
If you leave your child unattended always check if the drop side is in the highest position.
ic or gas fires.Do not place your cot in the close proximity of an open fire and other sources of heat, such as radiators electr
The mattress should be no more than 30 mm shorter or narrower than the internal length or width of the cot.
cot base.least 500 mm in the lowest position of the cot base and at least 200 mm in the highest position of the
of the body, or clothing (e.g. ribbons, drawstrings, necklaces) this could pose a risk of strangulation.
Regularly check that all fittings and components of the cot are fully tightened and in working order.
All assembly fittings should be tightened properly and care should be taken to ensure tha
when your child can crawl.
In the cots with removable dowels, always remove three dowels
suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
Should use only spare parts approved by the manufacturer.
o not use the cot if any part is broken, torn or missing.
The mattress should not be thicker than 100 mm.
Do not leave anything In the cot or place the cot close to another product, which could provide a foothold or present a danger of
The Lowest position is the safest, the base should always be used in that position as soon as the baby is old enough to sit up.
II
RETAIN FOR FUTURE REFERENCE”
“IMPORTANT, READ CAREFULLY
In the cots with drop side–
D
10.
11.
12.
13.
EN
1.
2.
3.
4.
5.
6.
7.
8.
9.