Akces-Med DALMATIAN INVENTO User manual

DALMATIAN
INVENTO™
USER MANUAL
MULTIFUNCTIONAL STANDER

R
35°C
5°C
70%
45%
CAUTION! Manufacturer takes responsibility for proper usage
of the device only when the product was purchased from
qualified Akces-Med employee or at specialized medical store!
CAUTION! AKCES-MED Ltd. reserve the right to introduce
technical and trading changes in the content of the instruction
without warning.
Medical product first class according to the Regulation
93/42/EWG of European Parliament and Council
regarding medical products. For this product the
producer issued relevant declaration of conformity.
Akces-Med. Sp. z o.o. Company introduced quality
management system ISO 13485 regarding
production, sales and service. The system is certified
by Det Norske Veritas.

DALMATIAN INVENTO
: www.akces-med.com '[phone] *[e-mail]
CONTENTS
The purpose of user manual
Indications for use . ............................. ..
3. General characteristics........................................................................................................6
3.1 Standard equipment...................................................................................................7
3.2 Additional equipment................................................................................................9
Size table..........................................
Detailed description on how to use
STANDING FRAME
6 Additional equipment.......................................................................................
Footers with adjustment
Cushions for upper limbs support
Independent adjustable side pelottes...................................................................
Adjustment of thigh abduction belts
Head stabilizing belt
Soft cover for tray...............................
H harness................................
6 point harness.....................
Tray for manual therapy
7. The use of multifunctional stander ......................................................................................25
7.1. Preparation of the patient.................................................................................................25
7.2. How to use multifunctional stander ...............................................................................26
7.3. Upright position .................................................................................................................27
7.4. How to use vest...................................................................................................................29
8. Safety rules........................................................................................................................32
9. Maintenance and cleaning ..............................................................................................35
10. Labelling.....................................................................................................................................32
1. ..............………...................................................................5
2. ...... ...... ............. ....................................................5
5. multifunctional stander .10
I. ......................................................................................................10
II. ........................................... .......................................................17
III. ......................................... …………………….18
. ...................20
6.1 ....................................................................................................20
4. ............................................................................ ..........8
........................................
POSITIONING CHAIR
.......
.......................
6.2 .................................................................................20
6.3 .........21
6.4 .............................................................21
6.5 ............................................................................22
6.6 .............................................................21
6.7 ............................................................................23
6.8 ............................................................................................23
6.9 .................................................................................................23
LYING FUNCTION

INTRODUCTION
Remember to read this user manual carefully. You will find not only useful
information but also guidelines regarding safe and effective use of the product.
DALMATIAN Invento™ is widely used in the process of rehabilitation. It is
recommended for not only children but also young people. It is used as a
rehabilitation chair during adopting the sitting position and then as a static
standing frame in the further process of rehabilitation. Besides, it can be a lying
function during the whole process. This device is equipped with the gas spring
thanks to which both therapists and care takers can put the child in upright
position without removing him from the chair. This multifunctional device
completes the process of rehabilitation due to adjustment and equipment.
Upright standing may be performed from 0 to 90 degrees. Moreover, safety vest
and pelvic belt are equipped with innovative “hold & pull”© system which allows
for quick and precise stabilization of the child in the device. As far as this product
is concerned, it is created from ecologic materials and it is hand painted.
If you have any questions or remarks, do not hesitate to contact with us:
Medical consultant: mobile [phone]
Akces-MED Sp. z o.o.: ph. [phone]
e-mail:
Thank you for purchasing our product!
[e-mail]
: www.akces-med.com '[phone] *[e-mail]
DALMATIAN INVENTO
CAUTION! Before using the product, user is obliged to
familiarize himself/herself with user manual. Remember
that complying with guidelines is highly important. It assures
safety and extends durability as well as aesthetics of the

DALMATIAN INVENTO
SEINDICATIONS FOR U
The present user manual contains basic information which is essential for
proper usage, preparation, maintenance, cleaning and guarantee conditions
regarding DALMATIAN INVENTO™ multifunctional stander.
User manual should be kept in easily accessible place. It is designed for people
who look after disabled children, and for both doctors as well as
physiotherapists who operate the device.
Remember that complying with guidelines is highly important. It assures safety
and extends durability as well as aesthetics of the device.
CAUTION! Before using the product, user is obliged to
familiarize himself/herself with user manual.
THE PURPOSE OF USER
It is recommended for children in the following cases:
źCerebral palsy – various types and forms.
źBrain and spinal cord injuries with lower limbs paralysis and weakness,
balance and motor coordination disorders with different etiology.
źDemyelinating disease (e.g. multiple sclerosis – SM).
źMeningocele.
źMuscles diseases with weakness and paralysis (dystrophy, myasthenia
gravis, myositis).
źGenetic disorders.
źDegeneration and neurological diseases.
źOther condition connected with muscles weakness, paralysis and
musculoskeletal disorders.
źAfter head and spinal cord injuries and spine trauma with paralysis and
paresis.
5
: www.akces-med.com '[phone] *[e-mail]

DALMATIAN INVENTO
GENERAL CHARACTERISTICS OF STANDER
6
: www.akces-med.com '[phone] *e[email protected]
10
1.
2.
3.
4. ,
5.
6.
7.
8.
9.
10. Gas spring
11. ,
12.
13. ,
Frame with castors and brakes
Independently adjustable footrest
Deep adjustable seat
Chest support (size 1, 2) Independently adjustable chest and pelvic support (size 3)
Tray
Forearm supports
Adjustable HexagonPro™ Headrest
Pelvic belt ('hold & pull' system)
Backrest
Removable and adjustable abduction block Knee support
4 points safety vest ('hold & pull' system)
Breathable upholstery ATMO™ SIZE 1 GRASS, SIZE 2 SEA, SIZE 3 LATE
7
9
4
6
3
2
1
8
5
12
11
13
3.2. Standard equipment

3.2. Additional equipment
DALMATIAN INVENTO
5
7
: www.akces-med.com '[phone] *produk[email protected]
DM_105 Poduszka podparcia karku
Headrest cotton cover
Head supporting belt
Soft cover for tray
Tray for nonverbal communication
Tray for manual therapy
Independently adjustable
side supports
3D foot adjustment
H Harness
6 points safety vest Trunk belt
Adjustable extended
headrest
Belt for moving patients
Thigh abduction belts
Tango wheel 75/100/125 mm
DMI_002 DMI_003 DMI_015
DMI_020
DMI_016
DMI_101 DMI_102 DMI_103
DMI_106 DMI_109 DMI_114
DMI_123 DMI_125 DMI_126
DMI_401 DMI_407 DMI_410
Lower limb supporting
cushion

DALMATIAN INVENTO
8
: www.akces-med.com '[phone] *e[email protected]
Elastico seat cushion
Shaped seat cushion (thigh
shape)
Elastico backrest cushion
Oxygen tank holder
DMI_413 DMI_412 DMI_419
DMI_507
Push handle
DMI_431

DALMATIAN INVENTO
4SIZE TABLE
9
: www.akces-med.com '[phone] *[e-mail]
Symbol Measurement Unit Size 1 Size 2 Size 3
ASeat width [cm] 33 36 45
LSeat depth [cm] 16-25 20-31 27-42
C1 Backrest height [cm] 28 35 40
CHeadrest height [cm] 37-52 42-53 49-64
EBackrest width [cm] 13-23 18-26 18-32
FFootrests length [cm] 15-34 15-37 15-45
Knee supports spacing [cm] 18-26 21-29 25-37
Knee supports height [cm] 19-46 28-51 19-58
Footplate length [cm] 19 22 25
L1 Abduction block adjustment (from backrest) [cm] 0-17 5-25 7-30
Tray height [cm] 67-80 74-97 95-112,5
Stander tilt angle [°] -10 - +85
XBackrest tilt angle [°] 90-180 90-180 90-180
ZFootrests tilt angle [°] 90-180 90-180 90-180
Maximum user weight [kg] 25 45 60
WEIGHT AND DIMENSIONS OF THE DEVICE Size 1 Size 2 Size 3
Width [cm] 46 50 60
Length – chair function [cm] 70 81 97
Height – chair function [cm] 96 118 138
Weight [kg] 22,5 27,5 43
WIndicative user height* [cm] <100 80-130 100-165
-10 - +85 -10 - +85
Note: Measurement tolerance range is +/- 1 cm / ½ in.
*The value cannot be main factor for selection of product size.
Note: Measurement tolerance range is +/- 1 cm / ½ in.
Note: Approximate values, depending on the product configuration.

I. POSITIONING CHAIR
5.1 The adjustment of seat
Please follow these steps so as to adjust the
depth of seat:
• loosen 4 fastening knobs situated under
the seat,
• adjust the depth of seat at your discretion,
• tighten knobs.
Please follow these steps so as to
adjust the tilt angle of seat:
• press pedal situated at the back of chair
and at the same time adjust the tilt angle
of seat at your discretion,
• block seat, release pedal.
It is always better to adjust it when
patient is placed in the device because
his/her weight makes it easier to cope
with spring force, otherwise you need to
use more strength.
DALMATIAN INVENTO
5 DESRIPTION HOW TO USE MULTIFUNCTIONAL STANDER
10
: www.akces-med.com '[phone] *e[email protected]

5.2 The adjustment of backrest's tilt angle
Please follow these steps so as to adjust the
tilt angle of backrest:
• loosen fastening knobs,
• adjust the tilt angle of backrest at your
discretion,
• tighten firmly fastening knobs.
5.3 The adjustment of trunk pelottes
Please follow these steps so as to adjust
trunk pelottes:
• loosen 4 fastening knobs,
• adjust the width and the height of
pelottes in compliance with patient's
measurements,
• tighten knobs.
DALMATIAN INVENTO
11
: www.akces-med.com '[phone] *[e-mail]

5.4 The adjustment of feet support
a) Please follow these steps so as to adjust
the height of footers:
• loosen fastening knobs,
• adjust the height of footer at your
discretion,
• tighten knobs.
b) Please follow these steps so as to adjust
the tilt angle of footrest:
• loosen fastening knobs situated at the side
of each footrest
• adjust the tilt angle at your discretion
• tighten knobs
DALMATIAN INVENTO
12
: www.akces-med.com '[phone] *e[email protected]
a
b
5.4.1. How to adjust new generation footrest tilt angle
Pull the lock pin on the footrest and adjust needed tilt angle
Release the lock pin when the needed footrest position have been set up
•
•
fig.3 fig.4

DALMATIAN INVENTO
13
: www.akces-med.com '[phone] *[e-mail]
b
cc
a
a
5.5 Abduction block with knee support
a) Please follow these steps so as to
adjust abduction block:
• loosen fastening knob,
• move abduction block either forwards
or backwards,
• tighten knob.
a) Please follow these steps so as to
mount knee support
źunscrew significantly fastening
knob situated at the front of
abduction block,
źinsert knee support,
źtighten fastening knob.
b) Please follow these steps so as to
adjust knee stabilizing pelottes
źloosen knobs fastenings knee
pelottes,
źadjust the distance of pelottes at
your discretion,
źtighten fastening knobs.

5.6 The adjustment of headrest
a) Please follow these steps so as to adjust
headrest:
• loosen fastening knobs situated at both
sides of headrest,
• adjust headrest,
• tighten firmly fastening knobs.
b) Next, it is important to:
• loosen screws from headrest's ribbing
with the aid of Allen key,
• adjust the shape of headrest at your
discretion,
• tighten firmly screws.
CAUTION! If vest and pelvic belt are mounted, it is
necessary to make sure that
- buckles do not unfasten under pressure
- buckles do not shift due to incorrect assembly
DALMATIAN INVENTO
14
: www.akces-med.com '[phone] *e[email protected]
HexagonPro© Headrest
The headrest may be adjusted with Allen key. You
can also change the width of the headrest. After
adjustment, there is necessary to screw all of screws
and bolts tightly!

DALMATIAN INVENTO
15
: www.akces-med.com '[phone] *[e-mail]
5.7 Assembly and adjustment of vest
Please follow these steps so as to mount
vest:
• fasten 4 fastening buckles,
• pull cotters so as to adjust the vest at
your discretion.
5.8 Assembly and adjustment of pelvic
belt
Please follow these steps so as to
mount pelvic belt:
• fasten two fastening buckles,
• pull cotters so as to adjust the length of
belt at your discretion
CAUTION!
elements of seat.
Shin cannot be squeezed by seat or any other
CAUTION! Before using the vest, it is essential to familiarize
yourself with the safety rules contained in the instruction.
Information on how to safely use the VEST can be found on the
page 29 of the instruction. Improper use and not obeying the
safety rules may endanger the user's health and life

DALMATIAN INVENTO
16
: www.akces-med.com '[phone] *e[email protected]
5.10 The adjustment of upper limb support
Please follow these steps so as to adjust the
height of upper limb support:
• loosen two fastening knobs that bolt batten with
upper limb support,
• adjust the height and tilt angle of upper limb
support at your discretion,
• tighten fastening knobs.
5.9 Assembly and adjustment of tray
Please follow these steps so as to mount tray:
• loosen fastening knobs situated under tray's top,
• adjust upper limb support at the same height,
• place tray on upper limb support,
• tighten fastening knobs.

DALMATIAN INVENTO
17
: www.akces-med.com '[phone] *[e-mail]
II. LYING FUNCTION
If you wish to adjust chair to lying position it
is necessary to adjust two footrest and
backrest horizontally. Points 5.2 and 5.4b
clearly show how footrest and backrest
should be adjusted.
Knee support in lying position
a) Knee support in lying position is
mounted on upper part of abduction block;
b)Adjust the height of knee support with
the aid of knob situated at the front of
abduction block;
c) It is possible to adjust standing frame.
Please follow steps described in point 5.5
( Look point 5.5, Knee support, page 13) .
Please follow these steps so as to adjust the tilt
angle of upper part of upper limb support
• loosen fastening knob,
• adjust the tilt angle at your discretion,
• tighten fastening knobs.
CAUTION!
function, the depth of the seat should be put down to a
minimum!
When configuring the device for the lying

DALMATIAN INVENTO
18
: www.akces-med.com '[phone] *e[email protected]
III STANDING FRAME
Please prepare the device for lying function if you want to move on to upright
standing. This process is described on page 17 (Look point II ,
page 17)
Mount knee support and move on to upright standing once all elements are
prepared and adjusted to the patient. Unblock safety mandrel, press pedal (a)
and place the patient in a proper position (b).
LYING FUNCTION
.
CAUTION!
pelvic belt are correctly fastened and adjusted before upright
standing. Furthermore, check if knee support is properly
mounted and , moreover, make sure that knee support
protects legs from bending.
It is important to make sure that both vest and
c
CAUTION!
function, the depth of the seat should be put down to a
minimum! Otherwise, during the upright position the feet of
the footrest can catch on the ground.
When configuring the device for the upright

DALMATIAN INVENTO
19
: www.akces-med.com '[phone] *[e-mail]
CAUTION!
are not placed between movable elements from the device,
otherwise patient will hurt.
Please always make sure that patient's body parts

6.1 Footers with adjustment
Please follow these steps so as to mount footers with adjustment:
ź dismantle standard footers,
ź mount footers with adjustment; mount them in a places where standard
footers were mounted,
ź adjust footers at your discretion,
ź tighten fastening knobs.
6.2 Cushions for upper limbs support
Please follow these steps so as to mount cushions for upper limbs support:
ź unscrew fastening knobs from each cushion,
ź put cushions on footrest's profiles,
ź adjust the height at your discretion,
ź tighten fastening knobs.
ADDITIONAL EQUIPMENT
6
DALMATIAN INVENTO
20
: www.akces-med.com '[phone] *e[email protected]