dreambaby Arizona Extenda-Gate F2164 User manual

PARTS LIST
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS
CAREFULLY AND KEEP FOR FUTURE REFERENCE.
If you sell or give away this product, make sure you give this instruction to the new owner.
WARNING:
This package contains small parts and
sharp points in an unassembled state.
Keep out of reach of children.
Adult assembly required.
WARNING — Incorrect installation can be dangerous.
WARNING — Do not use the safety barrier if any components are damaged or missing.
WARNING — The safety barrier must not be fitted across windows.
This safety gate is for domestic use only.
This safety gate has been designed for use with children up to 24 months of age.
The surfaces that the gate is to be fixed to must be suitable for the purpose and must be structurally sound.
Never use with a child able to climb over or dislodge/open the gate.
Always check that the gate is securely closed.
This gate has a manual close system.
This gate is intended for indoor use and is not to be exposed to outdoor elements.
Install this gate away from heaters and other sources of heat.
This product does not replace proper adult supervision and will not necessarily prevent all accidents.
NEVER leave child unattended.
P1
INSTRUCTIONS
F2164
F9205
F9206
F9207
Arizona
Extenda-Gate®MIN. 68cm / 26.75in
MAX. 112cm / 44in
This safety gate conforms to EN1930:2011
LM
I
H
F
G
D
K
Wood Screws
Wood use only
For Brick or Masonry use the
appropriate fittings, screws
and plugs
for your wall. (not included)
E
C
B
A
R
Optional
WARNING
J
2164
71mm
34.4mm
37mm
32.5mm
N
N
0 1 2 3 4 5 6
01 2
1
/
21
/
21
/
2
N
0 1 2 3 4 5 6
0 1 2
1 /
21
/
21
/
2
>
60mm / 2.3in
<
60mm / 2.3in
N
0 1 2 3 4 5 6
01 2
1 /
21
/
21
/
2
0123456
012
1/21/21/2
>
60mm/2.3in
<
60mm/2.3in
1

INSTALLATION
1
L
L
M
M
LM
68cm/26.75in
73cm/28.75in
80cm/31.5in
87cm/34.25in
93cm/36.5in
100cm/39.25in
106cm/41.75in
73cm/28.75in
80cm/31.5in
87cm/34.25in
93cm/36.5in
100cm/39.25in
106cm/41.75in
112cm/44in
P1
P1
MAX
16mm
(5/8in)
If the safety barrier
is used at the top of
stairs, it should not
be positioned
below the top level.
At the top of
landing, position
the gate 15cm (6in)
away from the top
step.
If the safety
barrier is used
at the bottom
of the stairs, it
should be
positioned at
the front of the
lowest tread
possible.
BOTTOM OF STAIRS
TOP OF STAIRS
15cm
(6in)
R
Always open
door AWAY
from stairs.
Use One-Way Stopper
(R) to set direction of
gate opening.
Ensure the surface you mount the
gate to is structurally sound such
as solid timber, brick or masonry.
For plaster/gyprock surface, locate
the timber beam or stud behind
and mount in this location
(mounting on plaster/gyprock
alone is not strong enough and
not safe). Do not mount to glass.
D
R
D
R
Use One-Way Stopper (R) to set direction of gate opening.
Skirting boards (baseboards)
ONLY suitable to be mounted onto skirting boards / base
boards that are a maximum thickness of 16mm (5/8in)
2

71mm
37mm
J
B
A
71mm
37mm
INSTALLATION
23
2a 2b
Wood screws (K) included.
For Brick or Masonry use the appropriate
fittings, screws and plugs for your wall
(not included)
A
GF
F
F
H
I
I
F
F
34.4mm
32.5mm
D
E32.5mm
34.4mm
J
D
AE
BC
+
68 - 112cm
26.75 - 44in
4b
A
H
4c
D
4a
C
G
B
X
X
Y
Y
R
Optional
4d
E
I
I
< 60mm / 2.3in
N
0 1 2 3 4 5 6
0 1 2
1
/
21
/
21
/
2
>60mm / 2.3in
WARNING - Prevent Entrapment
Use Ruler to ensure gap between outside edge of gate and the wall is LESS THAN 60mm/2.3in.
The Ruler SHOULD NOT fit through this gap. If gap is too big, disassemble gate and adjust panels
to the next wider setting – Refer INSTALLATION -
1 .
60mm
2.3in
MAX.
60mm
2.3in
MAX.
K
3

Tee-Zed acknowledges that its customers may be entitled to
statutory consumer guarantees and does not seek to exclude or
limit them. These guarantees include that Tee-Zed’s products
are of acceptable quality. This Tee-Zed product is for the
specific purpose detailed in the instructions and packaging and
Tee-Zed considers use outside of that purpose to be abnormal
use. To the maximum extent permitted by law, Tee-Zed does not
accept any liability for damage:
• arising from abnormal use of the products;
• caused by installation or removal of the products other than
in accordance with the supplied installation and removal
instructions; or
• arising under the law of tort or contract. Made in Hangzhou, China
Tee-Zed Products Pty Ltd
PO Box 2022,
Bondi Junction NSW 1355
Australia
� [phone]
 [email protected]
www.dreambaby.com.au
Tee-Zed Products (NZ) Ltd
PO Box 64013,
Botany Town Centre Auckland
New Zealand
� [phone]
 [email protected]
www.dreambaby.co.nz
Tee-Zed Products Ltd
PO Box 29227,
Dunfermline, KY12 2DN
United Kingdom
� [phone]
 [email protected]
www.dreambaby.co.uk
Dreambaby®products by
MAINTENANCE & CARE
• Gate must be fitted according to instructions, to ensure it works correctly.
• Regularly check brackets, hooks and screws to make sure the gate is securely in place. Adjust as required.
• To clean, wipe surface with a damp cloth or sponge using mild detergent and warm water.
Never clean with abrasive, ammonia based bleach based or spirit type cleaners.
• Any additional and replacement parts should be obtained from Tee-Zed Products.
2020.09.10_X.03
©2020 Tee-Zed Products Pty Ltd
CB
2
TO REMOVE
TO OPEN
2
D
1
3
1
4