Pairing AQU01 to mobile
phone or other device
1) Make sure the Aqua Audio device is
o. Activate the Bluetooth pairing mode
by pressing and holding the q for about 6
seconds until the red LED and blue LED are
ashing. e speaker is now ready for pairing.
2) Turn on your mobile phone or other
Bluetooth capable device and activate the
Bluetooth function.
3) Search for Bluetooth devices on your
mobile phone or other Bluetooth capable
device. “Aqua Audio” will show up on the
available Bluetooth devices.
4) Select “Aqua Audio” and enter password
“0000” if requested. e Aqua Audio will make
a single beep to conrm it is paired.
e Aqua Audio is now ready to output audio
from your mobile phone or other Bluetooth
capable device. Any time you turn on the Aqua
Audio, it will automatically connect to this
device if it is on.
Tip: See your phone instructions for more
details on using the Bluetooth function and
pairing devices.
Button Operation
qPower ON/OFF
}IPause button; pauses or resumes music
7 Press for previous song or hold button
down to reduce volume
8 Press for next song or hold button down
to increase volume
Phone button: use to pick up or hang up a
phone call
Troubleshooting
Technical Specications
Bluetooth support: 3.0+EDR
Range: 32'9"- 10 meters
Transmitting frequency:
2.4GHz
Power supply: DC5 Volt/100-120mA
Non-Replaceable Battery:
3.7v 400mAh lithium
Charging time: approx. 3 hours
Operating time: approx. 6 hours
IP grade: IPx4
Unit weight: approx. .1kg - 3.53 oz.
90 Day Limited Warranty
90 day limited warranty from date of purchase
against defects in materials and workmanship. This
warranty does not include damage to the product as
a result of misuse or accident.
Should your product become defective during the warranty
period, package the item securely and return it, prepaid/
insured, along with proof of purchase to: Zadro Products,
Inc. Attn: Customer Service.
To insure prompt repair, be sure that you provide complete
legible information and a note indicating the nature of
the product defect. We will repair or replace (at our sole
discretion) your product at no charge. Please include a
$10 (check or money order) to cover return postage and
handling charges. Zadro Products Inc. shall not be liable
for any incidental or consequential damages arising out
of defects in this product, whether or not caused by its
negligence.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or allow limitations on
how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you. This warranty gives you
specic legal rights and you may also have other rights,
which vary from state to state.
Thank you for choosing Zadro Products, Inc.
© Zadro Products, Inc.
5422 Argosy Ave.
Huntington Beach, CA 92649
(800)468-4348•(714)892-9200
Fax:(714)892-7477
www.zadroinc.com
Sympton Cause Solution
Can not
switch on
AQU01
Battery
Depleted
Charge the Unit
Unable to
pair the
speaker
Speaker
is already
switched on or
not in pairing
mode
Refer to the section
"Pairing AQU01 to
mobile phone or
other device" or see
instructions on your
Bluetooth device for
pairing Bluetooth
devices
revised 09-26-13
