Zanussi ZDV12002FA User manual

Operating Instructions – Dishwasher Zanussi ZDV12002FA
The control panel
1. On/Off indicator light
2. Programme indicators
3. Indicators
End indicator
Salt indicator. It is always off while the programme operates
4. Programme button
Loading your appliance
Before placing dishes in the machine, remove any scraps of food to avoid clogging the filters and consequently
reducing the performance. Do not load very small items which can fall through the baskets.
The lower basket
The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Large dishes and lids should be
arranged around the edge of the basket ensuring that the spray arm can turn freely.
The cutlery basket
Long bladed knives stored in an upright position are a potential hazard. Long and or sharp items of cutlery such as
carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items
such as knives. Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the
handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles
facing upwards. Mix spoons with other cutlery to prevent from sticking together.

The upper basket
The upper basket is designed for plates, salad bowls, cups and glasses. Arrange items on and underneath the fold-
down cup racks so that water can reach all surfaces. Light items (plastic bowls etc) should be loaded in the upper
basket and arranged so they do not move.
Washing programmes
Operating sequence
1. Load the dishes removing any scraps of food. Pull the lower basket out and arrange the saucepans, plates and
cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups in it. Slide the baskets
back into the machine.
2. Ensure that the spray arms can rotate freely.
3. Press the on/off button to activate the appliance.
4. Add the detergent.
5. Set the programme by pressing the button until the indicator of the programme you want to set comes on.
6. Close the door to start the programme.

If you open the door while the programme is running, the appliance stops. When the door is closed the appliance
continues from the point of interruption.
7. At the end of the programme press the on/ off button to deactivate the appliance.
Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as
steam may escape.