Zanussi ZCF 106 A Specification sheet

820 41 72 31
OPERATING AND INSTALLATION MANUAL
CHEST FREEZER
ZCF 78 A
ZCF 92 A
ZCF 106 A
ZANUSSI

2
Prior to Installation
Check the appliance for transport damage. Under no
circumstances should a damaged appliance be
installed. In the event of damage please contact your
retailer.
Installation
This appliance is heavy. Care should be taken when
moving it.
It is dangerous to alter the specifications or attempt
to modify this product in any way.
Ensure that the appliance does not stand on the
electrical supply cable.
Important: If the supply cable is damaged, it must
be replaced by authorised service or qualified
personnel using a special cable of the same type.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall, but leaving the required
distance for ventilation, as stated in the installation
instructions.
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow
the refrigerant to settle.
Refrigerant
The refrigerant isobutane (R 600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is neverthless flammable.
During transportation and installation of the
appliance, be certain that none of the components
of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
- avoid open flames and sources of ignition.
- thorougly ventilate the room in witch the appliance
is situated.
Child Safety
Do not allow children to tamper with the controls or
play with the product.
There is a risk of suffocation! Keep packaging
material away from children!
General Safety
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by
authorised technicians.
Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible
fluid leakages.
The appliance must not be located close to
radiators or boilers.
Avoid prolonged exposure of the appliance
to direct sunlight.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.
During Use
This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs. It
is not intended for commercial or industrial use.
Containers with flammable gases or liquids can
leak at low temperatures. Do not store any
containers with flammable materials, such as
spray cans, fire extinguisher refill cartridges etc.
in the refrigerator.
Maintenance and Cleaning
Before cleaning, always switch off the appliance
and disconnect from the electrical supply.
When unplugging always pull the plug from the
mains socket, do not pull on the cable.
Servicing
This product should be serviced by an
authorised engineer and only genuine spare
parts should be used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Service Force Centre.
At the end of the Appliance Life
When disposing of your appliance use an
authorised disposal site.
Check with your local Council or Environmental
Health Officer to see if there are facilities in your
area for recycling the appliance.
Remove the plug and ensure that any locks or
catches are removed, to prevent young children
being trapped inside.
IMPORTANT SAFETY INSTRUCTIONS
These warnings are provided in the interests of your safety. Ensure that you understand them all
before installing or using this appliance. Your safety is of paramount importance. If you are unsure
about any of the meanings or these warnings contact the Customer Care Department.

3
Instructions for the User
Important Safety Information 2
Description of the Appliance 4
Control Panel 4
Operation
Before use 5
Starting the Appliance 5
Alarm light 5
Temperature Control 5
Opening/Closing the Lid 5
The role of the pressure equalisation valve 6
Freezing Fresh Food 6
Frozen Food Storage 6
Thawing 6
Low Frost System. 6
Baskets 7
Hints and Tips
Normal Operating Sounds 8
Food Storage 8
Energy Saving Advice 8
In the Event of a Power Failure 8
Defrosting 9
Maintenance and Cleaning
Internal cleaning 10
External cleaning 10
When the appliance is not in use 10
Something Not Working 11
Service and Spare Parts 12
Customer Care 12
Guarantee Conditions 13
Instructions for the Installer
Technical Specifications 16
Installation
Positioning 16
Electrical Connections 17
Guide to Use the Instructions
The following symbols will be found in the text to
guide you throughout the instructions:
Safety instructions
Step by step instructions for an operation
Hints and Tips
Contents

4
Description of the Appliance
Control Panel
A - Compartment for frozen food storage
B - Freezer calendar (recommended storage times for frozen foods)
C - Compartment for freezing fresh foods
D - Dividing wall
E - Control panel
F - Defrost water drain

5
Before Use
Remove all packaging and securing tapes. Wash
inside the appliance with lukewarm water and
bicarbonate of soda (5m1 to 0.5 litre of water). Do not
use soap or detergent as the smell may linger. Dry
thoroughly.
Starting the Appliance
Insert the plug into the wall socket. The green pilot
light will illuminate to show that the appliance is
switched on.
The red alarm light will also illuminate until the freezer
reaches the correct temperature.
Alarm Light
The red alarm light will illuminate when the
temperature in the freezer is higher than the
thermostat setting. This alarm light will illuminate if:
The appliance has just been started.
Fresh food has been put in the freezer.
The lid has been left open, opened frequently or
open for too long.
The red light will go out when the freezer has returned
to the correct temperature.
Temperature Control
The temperature within the freezer is controlled by the
thermostat situated on the lower front of the cabinet.
To operate the freezer, proceed as follows:-
When you first start the freezer we suggest that you
turn the thermostat to a medium setting ie 3-4. The
correct setting can be found by measuring the
temperature of the top middle package in the freezer.
This should not have a temperature warmer than
-18°C.
1 = Lowest setting, minimum cold
7 = Highest setting, maximum cold
Allow the freezer to run for several hours before
placing food inside.
Do not fill the freezer to more than 5mm below the top
edge.
Opening/Closing the Lid
The lid is fitted with a tightly closing sealing strip to
prevent moisture entering the freezer, increasing the
amount of frost formed.
When the lid is opened the air inside the freezer
becomes slightly warmer and expands. When the lid is
closed again the air is cooled immediately. This may
lead to the creation of a vacuum which makes it hard
to open the lid again immediately. Never use
excessive force on the handle.
Operation