ZENEC E GO - User manual

GPS NAVIGATION SYSTEM
MODEL NO:
QUICK START GUIDE (English)

1
Startup screen: the Navigation menu
When ZENEC Navigation Software starts, the Navigation menu appears. From here you can
reach all parts of ZENEC Navigation Software.
The Navigation menu contains the following options:
•Tap to specify your destination.
•Tap to navigate or to browse the map.
•Tap to customise the way ZENEC Navigation Software works.
The Find menu contains the following options:
•Tap to specify an address as your destination.
•Tap for the list of recent destinations.
•Tap to select one of the stored Points of Interest.
•Tap for the list of your favourite destinations.

2
Navigating to an address
In the Navigation menu, tap , .
By default, ZENEC Navigation Software proposes the country/state and settlement where you
are. If needed, tap the button with the name of the country/state, and select a different one
from the list.
If needed, change the settlement:
•To select the settlement from the list of recently used ones, tap the button.
•To enter a new settlement:
1. Tap the button with the name of the settlement, or if you have changed the
country/state, tap .
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
•After entering a couple of characters, the names that match the string
appear in a list.
•Tap to open the list of results before it appears
automatically.
4. Pick the settlement from the list.

3
Navigating to an address
Enter the street name:
1. Tap .
2. Start entering the street name on the keyboard.
3. Get to the list of results:
•After entering a couple of characters, the names that match the string appear in
a list.
•Tap to open the list of results before it appears automatically.
4. Pick the street from the list.
Enter the house number:
1. Tap .
2. Enter the house number on the keyboard.
3. Tap to finish entering the address.
The map appears with the selected point in the middle. Tap from the Cursor
menu. The route is then automatically calculated, and you can start navigating.

4
Navigating to a POI
On the Map screen, tap to return to the Navigation menu.
In the Navigation menu, tap , .
Select the area around which the POI should be searched for:
•: The POI will be searched for around a given address.
•: The POI will be searched for around the Cursor.
•: The POI will be searched for around the current GPS position.
•: The POI will be searched for around the destination of the active
route.
•: The POI will be searched for not around a given point, but by the size
of the detour it adds to the active route. This can be useful if you search for a later
stopover that causes only a minimal detour, for example upcoming petrol stations or
restaurants.
After this, the list of POI categories appear.

5
Navigating to a POI
You can narrow the search with the following:
•Select the POI group (e.g. Accommodation), and after that, if needed, select the POI
subgroup (e.g. Hotel or Motel).
•To find the POI by its name, tap , and use the keyboard to enter a part
of the name.
•To list all POIs in a given POI group, tap .
[optional] When finally the list of results appear, you can change the list order with the
or button.
Tap the desired POI in the list.
The map appears with the selected point in the middle. Tap from the
Cursor menu. The route is then automatically calculated, and you can start navigating.

6
Map screen
The most important and most often used screen of ZENEC Navigation Software is the Map
screen. The map looks similar to a conventional road-map. The blue arrow represents your
current position, and the orange line shows the recommended route.
There are several screen buttons and data fields on the screen to help you navigate. Their
functions are explained in detail in the User Manual.
During navigation, the screen shows route information and trip data, but when you tap the
map, additional buttons and controls appear for a few seconds. Most parts of the screen
behave as buttons.
, or : Cycles through the available map view modes: a North oriented 2D
(classic top-down) view, a rotated 2D view and a rotated 3D (perspective) view.
: Opens the Navigation menu.
If you have moved the map, a button appears. Tap this button to move the map back to
the current GPS position.

7
1 End User Licence Agreement
1 The contracting parties
1.1 Contracting parties to this Agreement are, on the one hand:
NNG Global Services LLC. (23 Bérc utca, H-1016 Budapest, Hungary; Hungarian reg.no.: 01-
09-913383) as Licensor
and
the legal user (as defined in Section 2) of the object of this Agreement according to Section 4,
hereinafter referred to as User on the other hand (hereinafter jointly referred to as Parties).
2 Conclusion of the Agreement
2.1 The Parties hereby acknowledge that this Agreement shall be concluded by implicit
conduct of the Parties, without a signature of the Parties.
2.2 The User hereby acknowledges that following the lawful acquisition of the software
product constituting the object of this Agreement (Section 4), any degree of use, installation to
a computer or other hardware, installation of such hardware into a vehicle, pressing of the
“Accept” button displayed by the software during installation or use (hereinafter referred to as
Actions of Use) shall be deemed as implicit conduct resulting in the conclusion of the
Agreement between the User and the Licensor.
2.3 This Agreement shall by no means entitle persons who unlawfully acquire, use, install on
a computer, install in a vehicle or utilise in any manner whatsoever the Software Product.
2.4 The End User Licence Agreement between the Parties shall be concluded with terms set
forth in this Agreement.
2.5 The time of conclusion of this Agreement is the time of executing the first Action of Use
(commencement of use).
3 Applicable law
3.1 In issues not regulated by this Agreement, the jurisdiction of the Republic of Hungary shall
be applicable, with specific reference to the Act No. 4 of 1959 on the Civil Code (CC) and to
Act No 76 of 1999 on Copyrights (CA).
3.2 This agreement is issued in English and in Hungarian. In case of dispute the Hungarian
text shall prevail.
4 The object of the Agreement
4.1 The object of this Agreement shall be the navigation guidance software product of
Licensor (hereinafter referred to as Software Product).
4.2 The Software Product shall include the operating computer program, its complete
documentation, and the map database belonging thereto.
4.3 Any form of display, storage, coding, including printed, electronic or graphic display,
storage, source or object code of the Software Product, or any other as yet undefined form of
display, storage, or coding, or any medium thereof shall be deemed as part of the Software
Product.
4.4 Error corrections, additions, updates used by the User as defined in Section 2 following
the conclusion of this Agreement shall also be deemed as part of the Software Product.
5 Owner of copyrights
5.1 The Licensor - unless contractual or legal regulations state otherwise - is the exclusive
owner of all material copyrights vested in the Software Product.
5.2 Copyrights extend to the whole Software Product and its parts separately as well.
5.3 The owner(s) of the copyrights of the map database forming part of the Software Product
is (are) natural person(s) or corporate entity(ies) as listed in the Appendix to this Agreement
or in the “About/Map” menu item of the operating computer program (hereinafter referred to
as Database Owner). Licensor hereby states that Licensor has obtained sufficient usage and

8
representation rights from the Database Owner in order to utilise and give into further
utilisation the map database as set forth in this Agreement.
5.4 In the conclusion and execution of this Agreement the Database Owner is represented by
Licensor in relations to the User.
5.5 By concluding this Agreement, Licensor shall withhold all rights vested in the Software
Product, except for those that the User is entitled to according to explicit legal regulations or
that of this Agreement.
6 Rights of the User
6.1 The User is entitled to install the Software Product on one hardware device (desktop,
handheld, portable computer, navigation device) at a time, and to run and use one copy
thereof.
6.2 The User is entitled to make one security copy of the Software Product. However, if the
Software Product is operational after installation without the use of the original media copy,
then the original media copy is deemed to be a security copy. In all other cases, the User is
only entitled to use the security copy if the original media copy of the Software Product has
become unsuitable for proper and legal use without any doubt, such state thereof being
supported by acceptable proof.
7 Limitations of use
7.1 The User is not entitled
7.1.1 to duplicate the Software Product (to make a copy thereof);
7.1.2 to lease, rent, lend, distribute, transfer it to a third person with or without a
consideration;
7.1.3 to translate the Software Product (including translation (compilation) to other
programming languages);
7.1.4 to decompile the Software Product;
7.1.5 to modify, extend, transform the Software Product (in whole or in part), to separate it
into parts, compose it with other products, install it in other products, utilise it in other
products, not even with the aim of achieving interoperability with other products;
7.1.6 apart from using the computer program, to obtain information from the map database
included in the Software Product, to decompile the map database, to use, copy, modify,
extend, transform the map database in whole or in part or the group of data stored therein, or
to install it in other products, utilise it in other products, not even with the aim of achieving
interoperability with other products;
8 Non-warranty, limitation of responsibility
8.1 Licensor hereby informs the User that although the greatest care was taken in producing
the Software Product, yet with respect to the essence of the Software Product and the
technical limitations, the Licensor does not warrant for the Software Product being completely
error-free, and the Licensor is not bound by any contractual obligation by which the Software
Product obtained by the User should be completely error-free.
8.2 The Licensor does not warrant that the Software Product is suitable for any purpose
defined either by the Licensor or the User, and does not warrant that the Software Product is
capable of interoperating with any other system, device or product (e.g. software or
hardware).
8.3 The Licensor does not assume any responsibility for damages incurred due to an error in
the Software Product (including errors of the computer program, the documentation and the
map database).
8.4 The Licensor does not assume any responsibility for damages incurred due to the
Software Product not being applicable for any defined purpose, or the error or lack of
interoperability thereof with any other system, device or product (e.g. software or hardware).
8.5 The Licensor shall hereby also draw the attention of the User with great emphasis to the
fact that while utilising the Software Product in any form of transportation, observing the traffic
regulations and rules (e.g. use of obligatory and/or reasonable and suitable security

9
measures, proper and generally expected care and attention in the given situation, and
special care and attention required due to utilising the Software Product) is the exclusive
responsibility of the User; the Licensor shall not assume any responsibility for any damages
occurred in relation to utilising the Software Product during transportation.
8.6 By concluding this Agreement, the User shall especially acknowledge the information
stated in Section 8 above.
9 Sanctions
9.1 The Licensor hereby informs the User that according to regulations of the CA, should the
Licensor find its rights to be breached, the Licensor may
9.1.1 claim the acknowledgement of such breach by court;
9.1.2 claim ceasing the breach and ordering the person under breach from continuing such;
9.1.3 claim that the person under breach give proper compensation (even by way of publicity,
to the expense of the person under breach);
9.1.4 claim the return of the increase of assets due to the breach;
9.1.5 claim ceasing the breaching situation, the restitution of the state before the breach, to
the expense of the person in breach, and may claim the destruction of instruments and
materials used for the breach, and that of the objects created by the breach;
9.1.6 claim damages.
9.2 The Licensor hereby also informs the User that the breach of copyrights and related rights
is a crime according to Act IV of 1978 on the Hungarian Criminal Code, which may draw as a
sanction a sentence of two years in prison in basic cases and up to eight years in prison in
qualified cases.
9.3 For disputes arising from this Agreement, the parties hereby agree on the exclusive
competence of - depending on value and title disputed - either the Central Court of Budapest
Districts (Pesti Központi Kerületi Bíróság) or the Municipal Court of Budapest (Fővárosi
Bíróság).

1 CH DVB-T TUNER
ZE-DVBT1 0
MODEL NO:
ZENEC · By ACR AG · Bohrturmweg 1 · Bad Zurzach · Switzerland
Other manuals for E GO -
4
This manual suits for next models
1
Table of contents
Other ZENEC GPS manuals

ZENEC
ZENEC ZE-NA2000N Mounting instructions

ZENEC
ZENEC INFOTAINER Z-N328 User manual

ZENEC
ZENEC ZE-NC620DMH User manual

ZENEC
ZENEC ZE-NA2000N User manual

ZENEC
ZENEC ZE-NC514 Mounting instructions

ZENEC
ZENEC ZENEC GPS NAVIGATION SYSTEM User manual

ZENEC
ZENEC ZE-NC524 Technical manual

ZENEC
ZENEC ZE-NC514 Technical manual

ZENEC
ZENEC ZENEC GPS NAVIGATION SYSTEM User manual

ZENEC
ZENEC ZENEC GPS NAVIGATION SYSTEM User manual