Zhongshan Hongmao HT-618 User manual

Boot/bonnet/door switches
Orange
Orange/white
Grey
Black
To starter solenoid To ignition switch
Grey
Black
30
85 86
87A
87
OPTIONAL
Existing Low Current Solenoid
Feed Wire(+12VDC, Key ON Only
Brown Siren
Green/black
Brake light
Foot brake switch
+12V DC
Orange/white
Ignition key ON
Blue
Green
Brown/white
white
Yellow
Black
Red
FUSE 15A
BATTERY
DC 12V
White/yellow
Parking light
White/yellow
Shock Sensor
Red/green/black
Arm & Memory LED
Override Sw.
Antenna
Alarm receiver
1 2 3 4 5 6 7 8 9 10 11 12 13
CONNECTION DIAGRAM
CAR ALARM SYSTEM
OPERATING & INSTALLATION INSTRUCTIONS
HT-618
16.
17.TRANSMITTER LEARNING PROCESS
Method 1:
a)Turn the ignition key to ON & OFF 5 times continuously then stay ON . The status LED
will flash to indicate the transmitter can be learnt.
b)Press any button of the transmitter to be learnt once, the status LED will stop flashing and light
solid, press any button of the transmitter once again, the siren will chirp once, the LED will turn
off and indicate successful learning. The LED will flash again ready for the next learning.
c)Repeat the same procedure in step b) for the maximum learning of 6 transmitters. After
completed learning of each transmitter turn off the ignition key to exit the learning process.
Method 2:
Open the case of the alarm receiver, press the Learning Switch on the control module once, the
status LED will light solid, then press any button of the transmitter to be learnt once, the siren
will chirp once, the LED will turn off and indicate successful learning. Repeat the above
procedures for the maximum learning of 6 transmitters.
18.TO DELETE TRANSMITTERS FROM MEMORY
Method 1: Open the case of the alarm receiver, press and hold the Learning Switch on the control
module for 3 seconds, the siren will chirp twice and the parking lights will flash 8 times to
indicate the transmitters in memory have been erased.
Method 2: Turn the ignition key to ON & OFF 5 times then stay ON , the status LED will
flash, then press the Override Switch 5 times, the siren will chirp twice and the parking lights
will flash 8 times and indicate the transmitters in memory have been erased.
VALET MODE LED ON (SOLID)
This is for situation in which it is not convenient for the alarm to be armed, such as car wash. In
the valet mode all of the alarm ' s security features have been turned "OFF" and only the
convenience features such as keyless entry can be operated. To activate this function, turn "ON"
the ignition, press and hold the Override switch for 5 seconds, the status LED will remain on and
solid for as long as the system is in "Valet Mode". Repeat the above operation to exit valet mode,
the LED will turn "OFF".
""" " ""
""" " ""
The battery for the transmitter is 12V. Change the battery when LED becomes dimmer or
transmission takes place in a nearer distance.
Changing the battery:
a.Remove the screws of the transmitter and open the back lid.
b.Take out the original battery and remember the (+) positive & (-) negative side of the battery.
c.Put in the new battery (Model No:GP23A) correctly.
d.Put on the back lid and screw down the screws and remember not to destroy the switch or the
LED on the circuit board.
WARNING

l Remote arming/disarming
l Silent arming
l Door trigger (negative trigger)
l Auto rearming
l Temporary chirp disable (siren is selectable accessory)
l Car finder
l Remote door lock/unlock
l Auto door unlock when ignition off
l Arm condition memory
l LED status indicator
lValet mode
l Emergency override
l Transmitter programmable
l Power/Vacuum type door lock (Selectable by jumper)
MAIN FEATURES:
1.ARM/DISARM ( BUTTON)
Press the button to arm/disarm the alarm.
Upon Arming: The siren will chirp once, the parking lights will flash once, the central door lock
will lock, the LED will begin to flash, the starter interrupt will engage and the alarm will enter
the armed state in 3 seconds.
Upon Disarming: The siren will chirp twice, the parking lights will flash twice, the central door
locks will unlock and the LED will turn off.
2.PANIC/CAR FINDER (FBUTTON)
Press the F button, the siren will sound and the parking lights will flash for approximately
45 seconds instantly, serving as a S.O.S signal during emergency and serves as a car finder.
Press the or F button within 45 seconds, the siren will stop and the alarm remain armed
and the central lock remain locked.
3.SILENT MODE (REMOTE SELECTABLE)
Press the and Fbutton simultaneously, the parking lights will flash twice and the system
will enter the silent mode. Press the both buttons again, the siren will chirp once and the parking
lights will flash once, the system will return to the chirp mode.
REMOTE CONTROL KEY OPERATION
(REMOTE CONTROL RANGE: 100 FEET)
FEATURES ILLUSTRATION
2.ENVIRONMENTAL PROTECTION SILENT ARMED MODE
Press the button while the alarm is in silent mode, the parking lights will flash once and
the doors will lock. If the alarm is triggered in silent armed state, the parking lights will flash
for 45 seconds.
3.DISARMING THE ALARM
Press the button to disarm the alarm. In alarm armed state, the siren will chirp twice and
the parking lights will flash twice. In silent armed state, the parking lights will flash twice.
4.CAR LOCATING WITH SOUND AND LIGHT
Press the F button, the siren will sound and the parking lights will flash for 45 seconds.
5.AUTO REARMING (REMOTE SETECTABLE)
If 30 seconds passed after disarming the alarm without any door being opened, the system
will rearm automatically. If accidentally the central door lock does not lock or the system does
not arm, then after 30 seconds, the siren will chirp once and the parking lights will flash
once, the central lock will lock automatically and the system will enter armed state.
To disable this function, turn the ignition key to ON position and open the door, then press and
hold the button for 1 second, the siren will chirp once and the parking lights will flash
once. Press and hold the button again for 1 second to enable this function, the siren will
chirp twice and the parking lights will flash twice.
6. AUTO LOCK (FOOT BRAKE LOCK)/AUTO UNLOCK (REMOTE SELECTABLE)
Central door lock will automatically lock while stepping on foot brake after turning ignition key
to ON position and doors/bonnet/boot closed. Next stepping on the foot brake, the central door
lock will not repeat lock except doors opened and closed again. Central door lock will
automatically unlock when the ignition key is removed.
To disable this function, turn the ignition key to ON position and close all the doors, then press
and hold the button for 1 second, the siren will chirp once and the parking lights will flash
once. Press and hold the button again for 1 second to enable this function, the siren will
chirp twice and the parking lights will flash twice.
7.DOOR NOT CLOSE WARNING (REMOTE SELECTABLE)
If any of the doors is open before the vehicle is in motion, the ignition key is in ACC, ON
position, the parking lights will keep on flashing until the door is closed, this will warn the others
driving behind.
To disable this function, turn the ignition key to ON position and open the door, then press and
hold the F button for 1 second, the siren will chirp once. Press and hold the F button again for
1 second to enable this function, the siren will chirp twice.
8. AUTO ARMING (REMOTE SELECTABLE)
Turn off the ignition and exit the vehicle, the alarm will arm automatically in one minute, the
siren will chirp once and the parking lights will flash once to confirm but the central door lock
will not lock.
To disable this function, turn the ignition key to ON position and close all the doors, then press
and hold the F button for 1 second, the siren will chirp once. Press and hold the F button again
for 1 second to enable this function, the siren will chirp twice.
9. IGNITION/STARTER DISABLE
Turn the ignition key to ON position while the alarm is armed, the system will break electronic
connection to the vehicle's ignition/starter circuit. This immobilizes your
vehicle, so thief cannot drive away even he had gained entry.
10. EMERGENCY OVERRIDE
While the alarm is armed, in the event that the remote transmitter is lost, wet or there is a strong
inference, the system can be reset without using transmitter. Open the vehicle door (the alarm
will sound), turn the ignition key to ON position and press the Override Switch once then the
system will disarm.
11.DOORS PROTECTION
When any door is opened while the alarm is armed, the siren will sound and the parking lights
will flash for approximately 45 seconds. If the door keeps open, this cycle will repeat 3 times
then the siren will stop but the parking lights will keep on flashing until the door is closed or
alarm disarmed.
12.LED INDICATOR TO SHOW THE STATUS OFTHE ALARM SYSTEM
A dashboard mounted, the red LED indicates when the alarm is in armed, disarmed and triggered
mode.
a)Alarm armed: LED flashes once each second.
b)Alarm disarmed: LED will not be lighted.
c)Alarm has been triggered: LED will be lighted continuously. (To reset the LED indicator, turn
the ignition key to ON position while the alarm is in disarmed mode and the LED should turn
off immediately.)
13.THREE INDEPENDENT TRIGGERING ZONES WITH MEMORY
There are sensor, doors and ignition key zones. If the alarm is triggered while it is armed, the
siren will emit a series of chirps upon disarming the alarm to alert the user, 3 chirps indicating
the doors zone is triggered; 4 chirps indicating the sensor is triggered and 5 chirps indicating the
ignition key zone triggered. The memory will be automatically cleared when turn the ignition
key to ON position in disarmed mode.
14.ARM CONDITION MEMORY
If the vehicle battery is disconnected while the alarm system is armed, the system will remain
armed when the battery is reconnected.
15.POWER/VACUUM TYPE DOOR LOCK (SELECTABLE BY JUMPER)
The factory setting is power door lock. You may select vacuum pump type door lock by opening
the case of the alarm receiver and changing the position of the jumper.
1. ALARM ARMED MODE
Press the button, the siren will chirp once, the parking lights will flash once, the doors
will lock and the starter interrupt will engage. If the alarm is triggered, the siren will sound and
the parking lights will flash for approximately 45 seconds as an intrusion alert.
Arm/Disarm
Car finder
or
For