ZKTeco IWB86BPAQ User manual

figure 3
ÿ20×ÿ13 mm
Figure 1
Spring cushion M12
Adjustable Wrench (User Prepared)
Attach Wall Bracket to Left
Bracket (as in Figure 2), 3 sets of
mounting heights (1 & 4, 2 & 5, 3 & 6),
optional on demand.
Figure 4
Packing list
Figure 2
· It is recommended to equip this model with a 55 to 86 inch
interactive whiteboard.
Step 3
Step 2
M8 × 25 mm
Note: "*" Indicates that due to differences in models, some models include this accessory, please refer to the current one.
Step 1
M6 × 130 mm
Adjust the wheel to
the braking state before
operation.
Step 4
Set the wheel to the brake state and screw it into the brackets
(as in Figure 1).
2support 3
4 pieces
F - Bar for hanging on the wall 2 pieces*
fasten all
bolts
First insert the
hole position
2 pieces
· To ensure correct and safe use, read
6
· The maximum weight of the bearing can support up to 100 kg.
carefully read this manual before installation.
5
Phillips Screwdriver (User Prepared)
1
on the stand
4
M6 screw*
1 PC
1 PC
Mobile Stand Installation Guide
C - Wall bracket 1 piece
Cross recessed hex head screw 14 pieces
A - Left support 1 piece
Compatible models
55“ Matching holes
3, 6 2, 5 1,
4
65" - 70"
75" - 86"
supports (as in Figure 4).
Attach the right bracket to the other end of the bracket Installation of the tray between the two
E - Wheels 4 pieces
wall (as shown in Figure 3).
Wall Bracket Hole Suggestions
1
B - Right support 1 piece
Tray in
positioning
pins
adjust the
D - Tray 1pc
Version: 1.1
Tray on
locating pin
Front of
Front of
1
1
installation steps

2 Hang the interactive whiteboard on the wall mounting plate and lock the security bolt.
requires at least 2 professionals to complete. 1Attach the wall mount plate to the wall bracket.
Make sure the brakes are locked, this step
Figure 6Figure 5
step 5 step 6
step 7
Attach the wall hanging bar to the entire machine as required.
necessary (as shown in Figure 5).
Make sure the side of the
wall plate with the locking
holes is the front side.
F
ZKTECO CO.,LTD. www.zkteco.com Copyright © 2020 ZKTECO CO., LTD. All rights reserved.
OBSERVATIONS:
Wall hanging bar (as in Figure 6).
finished product.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia City, Dongguan, China.
Phone: +86 769 - 82109991 Fax: +86 755 - 89602394
1
When the interactive whiteboard with its own hanging bar cannot be seamlessly combined
Hang the complete assembled machine on the
continuation.
effective with the tripod, you need to modify it together with the wall mount plate, as shown below.
Please refer to the following image for the
wall bracket and lock the security screw of the
Front of
Front of
Machine Translated by Google