Zline Washoe 31-0301 Assembly instructions

Bath Faucets
Installation Guide
and Users Manual

ZLINE created a wide range of faucet solutions delivering comfortable
elegance and undeniable quality down to the smallest detail. Brass
housing allows ZLINE faucets to be durable and provides sophistication.
It’s what’s on the inside that counts.
Behind the scenes, ZLINE’s main focus is improving water efficiency.
The faucets are manufactured with carefully hand selected materials
that undergo over 50,000 unit tests, well over the industry standard for
certification of 15,000 tests. 1.8 gal/min provides the perfect aerated
water pressure — saving water, energy, and time at the best price point in
the industry.

SAFETY INSTRUCTIONS 1
Prior to Installation
Safety Tips
Installation Preparation
Care and Maintenance
Notes
SINGLE HANDLE/CENTERSET FAUCETS 3
Parts
Tools
Models:
31-0301 (Washoe Series)
31-0308 (Diamond Peak Series)
31-0302 (North Lake Series)
31-0303 (South Lake Series)
31-0304 (Aloha Series)
31-0296 (Carnelian Series)
31-0300 (Donner Series)
31-0307 (Vikingsholm Series)
31-0306 (Heavenly Series)
31-0305 (Zephyr Series)
31-0298 (Eagle Falls Series)
31-0297 (Homewood Series)
31-0295 (Spooner Series)
21-0005 (Baldwin Series)
Assembly
TABLE OF CONTENTS

DOUBLE HANDLE FAUCETS 17
Parts
Tools
Models:
26-0075 (Marlette Series)
26-0071 (Alpine Series)
26-0070 (Fallen Leaf Series)
26-0072 (Crystal Bay Series)
26-0073 (Eldorado Series)
26-0074 (Emerald Bay Series)
Assembly
TROUBLESHOOTING 25
TABLE OF CONTENTS

1
Prior to Installation
Make sure that the cold and hot water lines are turned off.
Wrap all threaded connections with plumber’s tape. Always wrap in a clockwise
direction.
Cover your drain to avoid losing parts.
Do not disassemble the main faucet body, as it has been installed and commissioned
correctly and precisely before delivery to the factory.
To keep the faucet from jamming, flush the water pipe before installation.
Operating conditions: Working pressure at 0.05-1.0 MPa (including cold and hot
water pressure) with applicable water temperature: 39.2°F - 194°F.
Installation Preparation
1. Shut off the water and let the water in the current faucet drain.
2. Assemble needed tools. The tools needed for each installation are included at the
beginning of each section.
3. Loosen the hardware that keeps the current faucet in place. Remove faucet.
Care and Maintenance
To keep the product clean and shining, follow the steps below:
1. Rinse clean with water and dry with a soft cloth.
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners.
3. Do not use cloth with a coarse surface.
4. Unscrew the aerator and clean when necessary.
Safety Instructions
If soldering the water connections when installing the faucet, remove the O-rings,
cartridges, and washers before applying any heat.
Protect your eyes when cutting or soldering.
Do not over tighten screws/nuts. Finger tighten, then use a wrench/Philips-head
screwdriver to tighten the fixing screw/nut until snug.

2
NOTES
Faucet Model: Purchase Order #: Date:

3
1.
2.
3.
4.
5.
6.
7.
8.
1. Body
2. C Washer
3. C Washer
4. Lock Nut
5. Pop-up
6. Washer
7. Flat Washer
8. Nut
SINGLE HANDLE/CENTERSET FAUCET
1. Body
2. Washer
3. Washer
4. Nut
5. Pop-up
1. Body
2. Washer
3. Washer
4. Nut
5. Pop-up
6. Washer
7. Flat washer
8. Nut

4
Tools:
Time required:
+/- 45 minutes
Wrench
Legend:
Hot Water
Warning
Cold Water
Plumber’s Tape
Grease
Phillips-head screwdriver
Pliers
SINGLE HANDLE/CENTERSET FAUCET

5
SINGLE HANDLE FAUCET
Single Handle Faucet Models
31-0301 (Washoe Series)
31-0308 (Diamond Peak Series)

6
SINGLE HANDLE FAUCET
Single Handle Faucet Models
31-0302 (North Lake Series)
31-0303 (South Lake Series)

7
SINGLE HANDLE FAUCET
Single Handle Faucet Models
31-0304 (Aloha Series)
31-0296 (Carnelian Series)

8
SINGLE HANDLE FAUCET
Single Handle Faucet Models
31-0300 (Donner Series)
31-0307 (Vikingsholm Series)

9
SINGLE HANDLE FAUCET
Single Handle Faucet Models
31-0306 (Heavenly Series)
31-0305 (Zephyr Series)

10
SINGLE HANDLE FAUCET
31-0297 (Homewood Series)
Single Handle Faucet Models
31-0298 (Eagle Falls Series)

11
SINGLE HANDLE FAUCET
31-0295 (Spooner Series)

12
CENTERSET FAUCET
Centerset Faucet Models
21-0005 (Baldwin Series)

13
Mount faucet to counter top.
Secure the hoses to the hot (red) and
cold (blue) lines appropriately.
Loosen the fixing nut and screws for
the handles and put aside.
Secure the hardware into place.
SINGLE HANDLE/CENTERSET FAUCET

14
Remove the washer, flat washer, and
nut from the pop-up.
Insert the pop-up from above and tighten the nut
and washers below to secure to the counter top.
FOR MODELS WITH LIFT ROD
Set the flat rubber gasket over the drain hole in
your sink, then insert the flange into the drain hole.
Clear area before inserting pop-up
drain stopper.
Insert the stopper tailpiece from above. Position
the tailpiece hole to align with the hole to the side
of the body.
SINGLE HANDLE/CENTERSET FAUCET

15
Connect the drain lever by threading it into the
hole on the side of the body. The lever must pass
through the hole in the stopper tailpiece to function
properly.
Position the drain so that the lever is facing the
back of the fixture, in line with the faucet’s lift rod.
(See STEP 10)
If not already installed, insert the faucet’s lift rod
into its designated hole on the back of the faucet.
Attach the extension rod.
SINGLE HANDLE/CENTERSET FAUCET