Zonyee ZYBS01 User manual

ZYBS01
Zonyee Wireless Speaker User Manual
Zonyee ® Ultra Portable Wireless Stereo Pairing Splashproof Bluetooth Speakers
with 10W Dual-Drive Heavy Subwoofers, Hands Free Calls, Support A2DP/NFC/TF
Card, Dustproof and Shockproof Also
Bluetooth 4.0 chip set connects faster, more stable, compatible with all your
Bluetooth-equipped Devices. 8 Watts of total output power driven by two
40mm drivers and a massive passive radiator for incredible sound quality to
take sound everywhere you play.
How to use

General Function
Desired Result
Required Action
Power on
Press the (Button 1) about 2 seconds
Enter pairing mode
When power on, speaker will into pairing mode
automatically
Play/pause
Press (Button 4) to play when the device is pausing
and press (Button 4) to pause when the device is
playing
Volume up
Long press (Button 5)
Volume down
Long press (Button 3)
Previous song
Short press (Button 3)
Next song
Short press (Button 5)
Turn off
Press the (Button 1) for 3 seconds
Charging indicator
Plug the charger to port of the device (three led lights
will flash)
Answer a call
Press the (Button 2) for 1 second
Hang up a call
Press the (Button 2) for 1 second
Reject a call
Press the (Button 2) for 2 seconds

Hands-free
photograph
After connecting speaker to phone via Bluetooth, press
the (Button 4 or 2) to photograph
Pairing to a computer and Entertainment
1. If your laptop doesn’t have Bluetooth, you can use a Bluetooth
adapter.(Bluetooth adapter not be included)
2. Turn on the device to go to the pairing mode.
3. Open the Bluetooth software (such as BlueSoleil) installed on your laptop,
and selects “Search your Bluetooth device” function. Refer to user manual
of the Bluetooth software for more information.
4. After a few second the “ZYBS01” will list in Bluetooth software of your laptop
as a discovered device. Select this icon and click right button of mouse to
select “Pairing” item, then select “connect with audio device” with same
operation.
5. Open your media player soft to play music, watch TV/ movie and play game,
then all the sound will be playback on your device.
Charging your speaker
Make sure your speaker is fully charged for at least 6 hours before initial use.
While charging, the white LED lights flash constantly. When charging is
completed, the white LED lights would stay.
Technical specification
Parameter
Value
Bluetooth Specification
V4.0
Bluetooth file
Support A2DP, HFP, HSP
Output power
Total 8W (2×4W)
Waterproof class
IPX6 Waterproof
Speaker driver
40mm 4Ohm,2×1.5 inch speakers
RF Range
10M/33ft
Frequency Response
68HZ-20KHZ
Signal to noise
≥80dB
Distraction
≤5.0%
Power capacity
2000mAh
Playback time
11 hours (medium volume), 6 hours (
Maximum volume)
Standby time
120 hours
Charging time
3 hours

Dimension
4.8 x 1.8 x 2.5"
Weight
0.77 lb / 350 g
music formats
Support APE/FLAC/WAV lossless music formats,
Support TF card, MP3/WMA normal formats
TF memory card
≤32GB
USB
USB2.0/USB1.1
Music format
MP3, WMA, APE, FLAC, WAV
Bit Rate
MP3: 8 Kbps-320 Kbps
WMA:32Kbps-384 Kbps
APE: 600Kbps-1414 Kbps
FLAC: 600 Kbps-1414 Kbps
WAV: 32 Kbps-1414 Kbps
Battery indicator Charging indicator
Mode indicator
Turn on: When waiting for comparing, the white indicator flash quickly
Pause under Bluetooth mode: The white LED indicator flash slowly
Play under TF card: White LED stay
Pause under TF card: White LED flash

Play under Aux In: White LED stay
Mute under Aux In: White LED flash
Max volume: Beeps sound appear
How to pair your devices?
1. Press the power Button for 2 seconds, the white LED indicator will flash
2. Turn on Bluetooth function on cell phone, search the speaker “ZYBS01”
and connect it.
TF card mode and play
Insert TF card and turn on. Short press. Shift to “TF card mode”, the speaker
will play the stored music.

Note: If the speaker is on standby mode, insert the TF card, it will shift to TF
card mode automatically.
Line in mode
Long press to turn on speaker, press the Button 1 to shift the “Line in mode”,
then use the audio cable to play music.
FAQ
Question 1: Why is there no power even when the stereo speaker is power
on?
Answer: Ensure the battery is being charged 3 hours for first time use. The
LED is lighted when it starts charging.
Question 2: There is no sound when playback
Answer: Check the connection between your device with phone or computer,
if the connection is not established, please reconnect again. Make sure the
speaker is paired and connected target phone or other master device.

Question 3: Fail to pair speaker
Answer: 1. Restart speaker
2. If password needed, please input “0000”
Question 3: Music break off
Answer: Bluetooth working range is 33ft/10M, please play it within this area
Question 4: No sound
Answer: Check the volume adjustment; Speaker may paused
Question 5: Where is the volume control button
Answer: Long press towards the track buttons for 5 seconds to get the
volume down or up
Question 6: Music stops every several seconds
Answer: Reset the speaker with metal sticker to reset it