Zupapa Inflatable SUP User manual

User Manual
Zupapa Inflatable SUP
Read, understand, and follow guidelines in this manual
before (dis)assembling, using your inflatable SUP.
*Not for commercial use 2 models: With/Without the kayak seat
PLAY . ENJOY .BOND
Please make clear the MODEL you have.

User Manual for
Zupapa Inflatable SUP
• If you have any questions, suggestions, and (or) comments, please feel free to contact us at your earliest convenience.
Zupapa® Customer Happiness Executives are standing behind to help out all the time. We promise you are sure to
receive a reply in 12 hours.
• Check the Spam or your Message Settings if you do not receive a reply as it is probably blocked. Our Customer
Happiness Executives will always get back to you no later than the given timeframe.
About Zupapa®..............................................................................................................2
Safety Instructions........................................................................................................3
Parts List ..........................................................................................................................4
Assembly..........................................................................................................................8
Lock the SUP ................................................................................................................16
Disassembly .................................................................................................................17
Maintenance................................................................................................................20
Limited Warranty .......................................................................................................21
Troubleshooting..........................................................................................................21
Appendix.......................................................................................................................24
IMPORTANT
ZUPAPA

Our philosophy is to help the family members to PLAY together, ENJOY more family time, and strengthen the BOND. Since the
early 21st century, we have served hundreds of thousands of families with high-quality trampolines, dome climbers, hammocks &
stands, baseballs & nets, inflatable SUPs, swings, and gymnastics bars. We never slow down our pace to expand the business – we
are continuously working hard with carefully selected partners to provide more safe and reliable products that can deliver joy and
health to more families.
Brief
To be the preferred trustworthy brand in recreational sports and leisure activities.
Our Vision
Want to jump out onto the water for fun in summer? You need a Zupapa® inflatable stand-up paddleboard (SUP). Made of
double-layer military-grade materials, the structure is light weight but very sturdy and durable. It can carry up to 350 pounds, you
can paddle with your families or your friends ( of course, furry friends included!)! The non-slip paddling top fully covered by EVA is
also soft and comfortable, which delivers safer and more enjoyable paddling. It comes with professional shoulder straps, you can
take the equipment everywhere to start your exploration with ease; it also comes with a carry bag, you can pack all the parts inside
during your trip or the offseason.
Our Product
We aim to accompany all kids to grow up healthy both physically and mentally and create valuable memories for generations.
Our Purpose
01
ABOUT ZUPAPA®
2
This user manual applies to Zupapa® inflatable SUPs (stand-up paddleboards). Zupapa® reserves the right to change, update any
contents included without noticing in advance. You can always search for the latest version online.
Read, understand, and follow this user manual before (dis)assembling and using the paddleboard. Save this manual for future
reference. It’s the responsibility of the owner, supervisor, and player for potential risks of injuries due to inappropriate use not
obeying safety instructions in this manual.

Standing behind the excellent products is the industrial-leading after-sales service team. We provide a hassle-free warranty for all
Zupapa® products. Please do not hesitate to message Zupapa Customer Happiness Executives, we will try our best to work it
out for you.
Our Service
As with any kind of sports, the risk of injuries accompanies paddling. To enjoy the Zupapa® inflatable SUPs, please read, under-
stand, and practice the safety instructions below.
02
SAFETY INSTRUCTIONS
PLAY . ENJOY . BOND
• Learn and practice skills to rescue yourself and others.
• Learn the proper treatment of hypothermia and take a first aid
class if possible.
• Purchase and get proficient at using self-rescue aids.
• Recognize your level of experience and consult with a physician to
know whether you can paddle and how long you can do it.
• Keep an eye on the up-to-date weather forecast.
• Paddling on somewhere that matches your skills, knowledge, and
fitness.
• Tell your schedule to others: when, where, and how long you are
going to paddle.
• Go with a friend as much as possible.
• Do not take alcohol or mind-altering drugs before paddling.
Adequate preparation is critical to safepad-
dling. Before paddling, you should equip
yourself with enough self-rescue techniques,
learn as much as you can about the route and
any hazards, get an up-to-date weather
forecast.
Warning: MINORS MUST BE SUPERVISED AT ALL TIMES!
3
Before Paddling

Please follow the guidelines when paddling.
When Paddling • Wear a leash all the time in case of a fall.
• Wear slip-resistant footwear all the time.
• Wear a PFD (Personal Flotation Device) that is Coast Guard
approved.
4
• You can keep balance on a paddleboard by:
√ Standing at the center of the board about shoulder-width apart,
positioning your feet so that they are parallel, with knees slightly
bent and your back straight.
√ Keeping your gaze level at the horizon.
• To hold the paddle properly, you should hold it with the blade
sloping away from you. Please grip the top of the paddle with one
hand, place another hand about 24 inches (24”) below the shaft.
• If you’re paddling on the right, your left hand must be on the top
of the grip, and vice-versa.
• Wear a wetsuit or dry suit during cold weather.
• Carry a whistle so that you can send signals at any time.
• Carry a waterproof flashlight so that you can ask for help when
needed.
• Do not paddle at sunset.
• Avoid riding the equipment on shallow water because it may
damage fins.
The most basic skill is to use your core rather
than your arms. Try to twist your torso and
use your core muscles rather than pulling
yourself with the sole strength of your arms.
Please follow the suggestions instructed about
how to keep balance, hold the paddle, and
control the direction.
Basic Paddling Skills
When Paddling

You can refer to the following chart for the diagram, description, and quantity. When you need the replacement(s), get in touch
with Zupapa® Customer Happiness Executives, we are ready to make you 100% satisfied. Do not forget to provide the order
number, part number, quantity, and pictures (or video clips if applicable) so that you can get what you need as soon as
possible.
03
PARTS LIST
1. You will receive 16 kinds of parts for the model with the kayak seat and 12 kinds of parts for
the model without the kayak seat.
2. The listed 4 parts (marked as “/” in the following table) are NOT included for the model without
the kayak seat: Paddle Holder, Foot Bar, Paddle B, and Kayak Seat.
3. The Tool Kit includes the following: a container, a pump adapter, a wrench tool, and 2 pieces of
repair patches.
5
IMPORTANT
41.3”
Diagram Description Quantity
(with seat)
Tool Kit
( 1* container
1* pump adapter
1* wrench tool
2 * repair patches)
1
Paddle Holder 1
Quantity
(without seat)
1
/

Foot Bar 1
Coil Leash 1
/
1
6
Diagram Description Quantity
(with seat)
Quantity
(without seat)
Shoulder Strap 3 3
Air Pump Hose 1 1
Air Pump 1 1

Large Center Fin 1
Small Fin 2
1
2
7
Diagram Description Quantity
(with seat)
Quantity
( without seat)
Paddle Bar A 1 1
Paddle A 1 1
Paddle B /
1

Paddle Bar B 1 1
Paddle Board 1 1
8
Diagram Description Quantity
(with seat)
Backpack 1
Kayak Seat 1
Quantity
( without seat)
1
/
ZUPAPA

04
ASSEMBLY
Before Assembling
Assembly Instructions
The very first step is to inspect and tighten the valve as per the following steps. Please understand that although our factory
inflates each piece of equipment for more than 24 hours to ensure it is in good condition before sending the item out, the valve
may still get loose in transit, which is out of our control. For your safety, please inspect and tighten the valve each time
before using the SUP.
Please follow the guidelines below before the assembly.
We will introduce the steps to inflate the paddle board, assemble the accessories and seat (if there is), as well as the method to
lock your Zupapa® inflatable SUP.
1. Check and confirm you have all the listed parts according to the chapter Parts List. If you need any replacement(s), feel free to
reach out to Zupapa® Customer Happiness Executives with the ORDER NUMBER, PART NUMBER, REQUIRED QUANTITY for each
part, and photos (or video clips if applicable)
2. Inspect and tighten the valve in the way introduced in Step 1 of the Assembly Instructions.
3. Install the Foot Bar before inflating the paddle board
9
STEP 1 – INSPECT THE VALVE

a. Place the wrench tool into the core of the valve.
Details of the Valve
10
b. Tighten the valve by turning
the wrench tool clockwise.
Message Zupapa Customer Happiness Executives if you need more help or have any concerns.
IMPORTANT
c. The work is done when you can NOT move the tool. You can also re-confirm it by pouring some soapy water to see if it leaks.

STEP 2 – INFLATE THE PADDLE BOARD
Find the tips and the detailed steps to inflate the SUP from here.
Tips!
1. You can turn the electric pump into an inflatable SUP pump with
the Pump Adapter (in the Tool Kit).
11
2. About the PSI reading. It should NOT be over 15 PSI. The pump shows no reading for 0-5 PSI (see fig.1). The 12-13 PSI is
recommended for hot weather while it can be up to 15 PSI in cool weather (see fig.2 and fig.3)
Let’s inflate the paddle board.
a. Connect the hose with the pump where the “IN” is on.
b. Turn the valve anticlockwise.
c. Ensure the stem (the white part) is locked (up).
d. Connect the other end of the hose to the core of the valve, and turn the lock clockwise.
e. When inflating, you can change the pumping system by adjusting the Green Lever (see below). When the reading shows
from 0 – 8 PSI, we recommend you turn the Green Lever left to the SINGLE ACTION so that it would inflate to 15 PSI
much easier; when the reading is over 8 PSI, it would inflate faster if you turn it right to the DOUBLE ACTION.
1 2
2
1
3

12
Now it’s an inflated board!
STEP 3 – ASSEMBLE THE ACCESSORIES
Find the detailed steps to assemble the shoulder straps, the fins, and the paddle.
e
b
ac
SINGLE ACTION DOUBLE ACTION
d

Assemble the Shoulder Straps
a. Please fix the board at first. Pick out one strap, twist it around the middle (the widest part) of the board, then fasten the
buckle. Please repeat with another strap.
2
21 3
b. Connect the two assembled straps with the third
strap.
1413
ZUPAPA

Assemble the Fins
The 3 fins apply to the same assembly steps. Please slide the fin into the slot, then lock and tighten the screw.
1 2
2
13
Assemble the Paddle
There are 3 steps to assemble the paddle. We choose the Paddle Bar B for the assembly instruction. You can either use the
Paddle Bar B or Paddle B to form a complete paddle.
1 2
2
13
1414
Paddle A
Paddle Bar B
Paddle Bar A

a. Connect the Paddle Bar A with the
Paddle A by pressing down & locking the
button on the latter.
b. Connect the Paddle Bar B with the Paddle Bar A in the way as shown below. The bracket on the shaft (at the other end of the
Paddle Bar A) would make the work easy to be done.
1415
c. Fix the completed paddle to the
shoulder strap by sticking the Velcro.

Congratulations! Your Zupapa inflatable SUP without a seat is ready to go!
1416
STEP 4 – ASSEMBLE THE KAYAK SEAT
Please note that this step ONLY applies to the model with the kayak seat.
a. Place the seat on the board.
b. Tie the two lower straps with the two D rings behind the backrest. See fig. b below.
c. Tie the two upper straps with the two D rings beside the seat. See fig. c below.
• You can get a comfortable seat by adjusting the straps.
• Please do NOT sit on the SUP when it is still on the ground and with the fins
assembled, because it may damage the item, which will also void the warranty.
IMPORTANT
bac

All Zupapa® inflatable SUPs can be locked. When you have to leave your equipment aside temporarily,
please follow the steps below to lock it.
LOCK THE SUP
05
Note: We provide a free Paddle Keeper for the model with the seat while you need to find a Paddle
Keeper by yourself for the non-seat one.
1417
2
1
34 5

Please follow the steps below to disassemble Zupapa inflatable SUPs. Please understand Zupapa® will not be liable for any
damages due to improper operations.
DISASSEMBLY
06
Please loosen the screw to remove the fin from the slot. Important: Please make sure that the surrounding is free of debris or
sharp objects.
STEP 1 - REMOVE THE FINS
1418
STEP 2 – RINSE THE BOARD
With the board inflated and the valve closed, please rinse the board with fresh water and dry it out before moving to the next step.
Please take it seriously because debris, sand, salt, etc. would ruin the board.
a. Push down the white stem slowly so that the air inside would not ruin the valve’s internal mechanism.
b. Press down the white stem. Please keep your face away from the valve because the air released may cause harm.
For a safer operation, instead of pressing down the white stem immediately, please follow the steps below to deflate the board:
STEP 3 – DEFLATE THE BOARD
lock posltlon unlock posltlon

c. Extract out the left air with the air pump. Please note that the hose should be connected to the pump where the OUT is on.
1419
a. Take off the hose.
b. Ensure the valve is locked by check the status of the white stem (see the picture below).
c. Close the valve cap.
To roll up the board, you should make sure the valve is closed at first. Please do the following in order:
STEP 4 – DEFLATE THE BOARD
lock posltlon unlock posltlon