ZyDAS ZD1211 User manual

Wireless LAN USB Adapter
w/Ext.Antenna
QUICK START GUIDE
VERSION 2.0
2007/05/08

The installation & driver CD will automatically activate the autorun
tep 1 : installation & driver CD
tep 2 : to continue.
WLAN Adapter Quick Start Guide Driver CD
w/ Ext. Antenna
installation program after you insert the disk into your CD drive.
S
Insert the
into your CD-ROM.
S
Click Next
1

Step 3 :
Click Next to install at the
tep 4 : ing files until it finish
tep 5 : h to complete
tep 6 : shed install driver and
designated folder. Or, click
“Browse” to select different
folder.
S
Start copy
the installation.
S
Click Finis
installation.
S
After fini
utility on your system, plug the
USB adapter into the USB port of
your PC. Windows XP/2000 will
automatically detect the USB
Adapter.
2

WLAN USB Adapter uses its own management software. All functions e
controlled by users are provided by this application. When you insert th
WLAN USB Adapter into the USB port of PC, a new icon should appear in
the Windows System Tray automatically.
If the icon is in red, it means that WLAN USB Adapter configuration is
ity
he Link Quality and Signal Strength
e
nsmitting
x/Rx Frame displays the instantaneous
These values are updated every two
he Configuration Tool contains several fields where operating parameters
eed to
invalid or incomplete. Double click on that icon and the configuration
window will pop up as shown below. It shows the SSID of available
network. Once a network is chosen, the signal strength and link qual
are displayed.
T
bar chart is only active when the
node is in Infrastructure Mode. Th
bar graph displays the quality and
strength of the link between the
node and its Access Point. Link
Quality is a measurement
of receiving and tra
performances over the radio.
T
wireless Transmit and Receive
throughput in bytes per second.
seconds.
T
of the driver can be viewed or changed. Changes to any of the
parameters in this panel can be applied to the driver without a n
restart the computer
3

1. The installation & driver CD will automatically activate the autorun ase
. To install manually:
lug your USB dongle into USB arch
ocate and install the driver
tep 2 : installation disc into the
tep 3 : Vista search for the d
installation program after you insert the disk into your CD drive. Ple
refer to page 2 “INSTALL DRIVER/UTILITY”
2
P
interface, windows Vista will se
for compatible driver to install.
Step 1 :
Select “L
software”, Windows will guide you
through the process of installing
driver software for your device.
S
Insert the
CD-ROM and click “next” to continue
installation.
S
Windows
software and it will be installe
successfully.
4

Step 4 : allation, right click the a
tep 5 : etwork to connect to and
tep 6 : nnect Anyway” if the k.
After inst
network icon on the Windows Vist
System Tray, and click “Connect to a
network”.
S
Select a n
click “Connect”.
S
Click “Co
network is an unsecured networ
5

Step 7: le successfully connected
USB Dong
to network, Click “Close”
6