ZyXEL Communications GN-680T User manual

1/1
www.zyxel.com
ZyXEL GN-680T
Gigabit PCI Network Adapter
1. Auto-negotiating 10/100/1000Mbps
2. Automatic MDI/MDIC crossover
4. Support 802.1Q VLAN
5. Support 802.1p priority queue
6. Support ACPI to save power consumption
7. Support WoL(Wake-On-LAN) for remote wake-up
Specifications
Standards compliance
- IEEE802.3 10BASE-T Ethernet
- IEEE802.3u 100BASE-TX Fast Ethernet
- 1000Base-T gigabit
- ANSI/IEEE802.3 Auto-negotiation
- IEEE802.3x Flow Control
- 802.3ab
- 802.1p Priority Tagging
- 802.1q VLANs
Data transfer rates
- Ethernet 10M/20Mbps(half/full duplex)
- Fast Ethernet 100M/200M(half/full duplex)
- Gigabit 1000M/2000M (half/full)
Interface
- Single port: 10BASE-T, 100BASE-TX &
1000BASE-T Ethernet port
- PCI Bus type
- PCI 2.2
- 32 bit at 33MHz or 66MHz
Media Interface Exchange
- Auto MDI/MDI-X
Status LED
- LINK/ACT
- 10/100/1000Mbps
Cabling
- 10BASE-T: 2-pair UTP Cat.3, 4, 5 (100 m)
EIA/TIA-586 100-ohm STP (100 m)
- 100BASE-TX: UTP Cat.5 (100 m max.)
EIA/TIA-586 100-ohm STP (100 m max.)·
- 1000BASE-T: UTP Cat.5 (100 m max.)
EIA/TIA-586 100-ohm STP (100 m max.)
Performance
- QoS: 802.1Q VLAN tagging
802.1p, 8-priority queues (VLANs)
- Jumbo frame: Up to 7.5KB
Power saving
- ACPI Ver 2.0WoL
Management
- DMI 2.0WfM Baseline V2.0
Physical and Environmental Specifications
- Operating temperature: 0℃~45℃(32ºF to
113ºF)
- Humidity: 10% to 90% (Non-condensing)
- Dimensions:133(L) x 49(W) mm
- Weight : 64g
System requirement
- Gigabit switch(e.g.GS-108A)
- Network Cables
Certifications
- FCC Class B, CE, C-Tick