ZyXEL Communications WAH7608 User manual

Reset
Hardware Installation
Reset
Reset
Reset
Reset
Reset
Reset
4G
1
2
5
6
3
4
Declaration of Conformity
Safety Warning
Warranty Card
Battery
Adapter
USB cable
Device
QSG
Doc
Package Contents
1Check Internet Connection
2
POWER
ON
SIM Card
Drop the latch and push it upwards to lock
the SIM card into place.
Note : To Insert a Micro SD memory card
repeat steps 1-3 in the Micro SD card slot.
Gently insert the battery and close the
WAH7608 with the lid.
3
4
EN
Remove the lid. Push the metal latch in the
SIM slot down to unlock it. Then lift the latch.
Gently place the Mini SIM card into the SIM
Card slot.
Note 1 : If you have a Micro or Nano SIM card,
use a SIM card adapter to correctly fit it into
the Mini SIM Card slot.
Note 2 : Make sure the SIM card is placed
correctly to avoid damage to the pins.
1
2
EN Press the Power button and release it when
the screen turns on.
Check if the WAH7608 has successfully
connected to the mobile network.
Note : Your SIM card should have an active
mobile data plan.
5
6
EN
Quick Start Guide
WAH7608
LTE portable device (cat.4 Mi-Fi)

LTE Ally
Power Outlet
within
minutes
2
WiFi
WPS
setup
Android Only
Twice
Optional
WiFi 2.4G
Name : Zyxel _ _ _ _ _
KEY : _ _ _ _ _ _ _ _ _ _
OR OR
POWER
WPS
ON
Charge your WAH7608 Download the App Troubleshooting
Use the included power adapter to connect the
WAH7608 to a power outlet or a computer's USB
port.
EN
Press the Power button twice to view the
WAH7608’s wireless network settings. From
another device find this Name (SSID) and enter
the KEY to connect wirelessly to the WAH7608.
OR
(Optional) If your client supports WPS, press its
WPS button. Within 2 minutes, press the
WAH7608's WPS button to begin WPS pairing.
EN Download and use LTE Ally to configure the
WAH7608's fast Internet sharing, control
connected devices and data usage.
EN
Problem: I cannot connect to the WAH7608 wireless
network.
Possible Solutions:
1. Make sure the wireless network is enabled. Press
the WPS button for 3 seconds to enable or disable
the WAH7608’s wireless network.
2. Make sure you used the correct WiFi Name and
KEY to connect.
3. Remove the lid. Press the Reset button and release
it when the screen displays Reset to return your
WAH7608 to factory-default settings.
Problem: I am connected to the WAH7608 but cannot
access the Internet.
Possible Solutions:
1. If your SIM card has a PIN code, use LTE Ally or
connect to the web configurator (http://192.168.1.1)
using the username (admin) and password
(Default: 1234) to unlock your SIM card.
2. Make sure your SIM card’s account is valid and has
an active data plan.
3. Make sure your data plan has not reached its limit.
4. Make sure you’re in the ISP’s coverage area.
5. Make sure you correctly inserted the SIM card in
the SIM card slot.
6. Make sure your mobile access information
(such as APN) is entered correctly. You can check
this in the web configurator (http://192.168.1.1) or
LTE Ally.
See the User's Guide at www.zyxel.com
for more information, including customer support
and safety warnings .
EU Importer
Zyxel Communications A/S
Generatorvej 8D, 2860 Søborg, Denmark.
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
Connecting to the WAH7608
3