2Y-LINK Technology CI-12-ASP-DAASS User manual

1
CCTV INSTALLTION SYSTEM
12 CHANNELS Signal Processor for transmission of Power,
Video, Two-Wa Audio, Control Data
and Two-Wa Securit /Fire Alarm Signals
Signal Processor
CI-12-ASP-DAASS
User Manual

2
The package of 2Y-LINK MultiFunction Model 12 Channels Signal
Processor –CI-12-ASP-DAASS contents :
Product contents
- One 12 Channels Signal Processor CI-12-ASP-DAASS Unit with built-in power
suppl
- One power cord (AU, BS, CN, EU or US)
- CI-12-ASP-DAASS Signal Processor User Manual
Note : This package is onl one part of CCTV installation package, must work with
the Associated Equipment for complete CCTV S stem.
Associated Equipment
Mixer P 300A12DAASS
Mixer P 300A12DASS
DB-4RJ Distribution Board for Four Cameras star connection with RJ45 Sockets
CC-2RJ Distribution Board for Four Cameras ring connection with RJ45 Socket
PS-10KU Power Stabilizer
RM-16 Mounting Bracket
For instructions regarding the connection of the associated equipment in our s stem,
please consult the User Manual of the 2Y-LINK MultiFunction Model 12 Channels
Signal Processor CI-12-ASP-DAASS contents.
Qualified installation Engineers and Technicians are needed to install our
2Y-LINK CCTV s stem.

3
2Y-LINK MultiFunction Model 12 CHANNELS SIGNAL PROCESSOR
CI-12-ASP-DAASS
Contents
Descriptions
Page No.
The Package of System Content 2
Product Overview 4-5
1. Signal Processor CI-12-ASP-DAASS
2. Power Cord
Associated Equipment needed
1. Mixer PF300A12DAASS (for channel 12)
2. Mixer PF300A12DASS (for channel 1 –11)
3. Distribution Board
A. Ring Connection CC-2RJ
B. Star Connection DB-4RJ
4. Power Stabilizer
4
4
5
5
5
6
6
6
6
Cat.5 Ca le Application
Specification – CI-12-ASP-PVDAASS
Typical Wiring
1. Wiring Connections for Channel 1 to Channel 11
(with ONE Cat5. cable for one camera)
6
7
8-15
8-9
2. Wiring Connections for Channel 12
(with Cat5. cable)
3. Wiring Connections of one CAT.5 for four cameras
(Star method )
4. Wiring Connections of one CAT.5 for four cameras
(Ring method)
10-11
12-13
14-15
How to mount the Signal Processor to 19” Rack 16
Detail Overview 17-22
Signal Process: CI-12-ASP-DAASS
17-18
Mixer PF300A12DAASS
Mixer PF300A12DASS
19-20
21-22
Trou le Shooting
Limited Warranty
23
24

4
Product Overview
The system includes following parts
1) Signal Processor PN:CI-12-ASP-DAASS
The Signal Processor should be installed at Control room next to DVR/Monitor for 12
cameras thru mixers selected. The channel 1 – 11, are able to transmit POWER, VIDEO,
ONE WAY AUDIO (from Camera side), CONTROL DATA for camera and TWO WAY ALARM
Signals. In this case, the suitable Mixer should be PF300A12DASS.
The channel 12 is able to transmit POWER, VIDEO, TWO WAY AUDIO, CONTROL DATA for
moving the camera and TWO WAY ALARM signals. The Mixer should use PF300A12DAASS
2) POWER CORD
AU --- AUSTRALIA
BS --- HONG KONG and UK
CN --- CHINA
EU --- EUROPEAN countries (please specific the countr )
US --- onl for US market
CI-12-ASP-DAASS FRONT VIEW
44mm(1-3/4in)
CI-12-ASP-DAASS
CI-12-ASP-DAASS BACK VIEW

5
Associated Equipment needed
1).Mixer P 300A12DAASS (for channel 12)
The Mixer should be installed near the Camera at the surveillance site
2).Mixer P 300A12DASS (for channel 1 –11)
The Mixer should be installed near the Camera at the surveillance site
Thickness
35mm(1-3/8in)
96mm(3-3/4in)
70mm
(2-3/4in)
PF300A12DAASS
70mm
(2-3/4in) Thickness
35mm(1-3/8in)
96mm(3-3/4in)
PF300A12DASS

6
Associated Equipment needed
3). Distribution Board for ONE Cat5 cable support 4 cameras
A. Ring Connection
CC-2RJ
B. Star Connection
DB-4RJ
4). Power Stabilizer PS-10KU
For better performance of the picture qualit , it
can be used mainl for maintain stable picture
when moving the camera b the control data of
RS-485
Cat.5 Ca le Application
The Cable connecting RJ45 connector for Mixer to Signal Processor with Cat5 is as follows
To achieve best performance of the
2Y
-
LINK
S stem, t
he
main
points for
standard Cat.5 cable must be noted as follows:
(1) DC resistance ≤
≤≤
≤ 10 Ohm/100m(330ft)
(2)
For Cat.5 cable wiring connection,RJ45 connector should be used according to
usual computer network standard TIA/EIA-568-B as below:
(3)
“Non
-
standard”
Cat. 5 cable like the conducting wire made b copper
plated
steel wire is not suitable for use

7
Specification- CI-12-ASP-DAASS
Specifications for Signal Processor CI-12-ASP-DAASS
NO. of Channel
12 Channels
Each Channel Video Output
1.0 Vp-p 75 ohm
Each Channel Audio Output
2.0Vp-p 600 ohm
Each Channel Alarm Output
DC 12V 50mA
Alarm Input
Normal Open
Microphone
2Y-LINK Microphone （ PVA-MIC ） or Microphone with output
impedance 600-3000 Ohm and DC operating voltage 9-15
Volt
Band Width
10MHZ
Max. Distance/Channel
Specified for different Mixer Models up to 500 m (1640 ft.)
Connecting Ports
Front :
Power, Video, Audio, Control data and Alarm
I/O between SP and Mixer : RJ45 Sockets
(One Cat.5 cable for 1 Cameras)
Power, Video, Audio, data (RS485)and Alarm
I/O between SP and Mixer : RJ45 Sockets
(One Cat.5 cable for 4 Cameras)
Data (RS485) Input from Control Ke pad : RJ45 Sockets
Alarm Input/Output : Terminal
Back:
Video Output to DVR/Monitor: BNC Plug
Audio Output to DVR: BNC Plug
Audio Output to Active Speakers : Terminal
Data (RS485) Input from Control Ke pad: Terminal
Microphone Input: Terminal
Power IN from AC/DC adapter Socket
AC Power Main
AC 110V/60Hz (for US) or
AC230V/50Hz (for BS, CN, AU, EU)
Operating Temperature 0
o
C ~ +40
o
C / 32
o
F ~ 104
o
F
Operating Humidit 10~80%
Case/Weight STEEL / 3.4kg( 7.5 lb)
Dimensions
440mm(L)×280mm(W)×44mm(H)
17-5/12in.(L)×11in.(W)×1-3/4in(H)
Built-in Power Suppl
(i) Maximum Power/Channel
(ii) Total Power for 12 Channels
(2000mA/DC12V) for one Camera
(10000mA/DC12V)one 50m Cat,5 for 1 channel for 12
Cameras

8
Typical Wiring
1). Wiring connections for Channel 1 to Channel 11
with ONE Cat5. cable for one camera (HIGH POWER and LONG Transmission)
Camera power distance table
Camera power
(12V DC)
100~1200 mA
(1.2 ~ 14.4 W)
1200~1500mA
(14.4 ~ 18 W)
1500~2000
mA
(18 ~ 24W)
Distance
≤500m
≤1640ft
≤400m
≤1312ft
≤300m
≤980ft
Surveillance Site
Mixer
PF300A12DASS
｝ ｝
｝

9
Typical Wiring
Control Room
C01~C11
｝
AC Power In
Signal Processor
CI-12-ASP-DAASS
｝

10
Typical Wiring
2). Wiring connections for Channel 12
with ONE Cat5. cable for one camera (HIGH POWER and LONG Transmission)
Camera power distance table
Camera power
(12V DC)
100~1000 mA
(1.2 ~ 12 W)
1000~1300mA.
(12 ~ 15.6 W)
1300~1600mA
(15.6 ~ 19.2W)
1600~2000mA
(19.2 ~24W)
Distance
≤500m
≤1640ft
≤400m
≤1312ft
≤300m
≤980ft
≤200m
≤650ft
Mixer
PF300A12DAASS
｝
｝
｝ ｝
Surveillance Site
｝ ｝