3d cabin PS5 User manual

SKU : 3D PS5 DI WM2 4P
PS5 Wall Mount Wall Bracket Holder Stand For Play Station 5 Digital Corner Support
WWW.3DCABIN.CO.UK
3DCabin
@3DCabin
CONTENTS:4 x Bracket (A,B, C, D)6 x Screws6 x Wall Plugs
GB : Contains small Parts Keep away from Children.DE : Enthält Kleinteile Von Kindern fernhalten.FR : Contient de petites pièces Tenir hors de portée des enfants.IT: Contiene piccole parti Tenere lontano dalla portatadei bambini.ES: Contiene piezas pequeñas Mantener alejado de los niños.Please consult a qualified person when installing.Instructions & Offers Inside!
INSTRUCTIONS:1.Find a suitable location and check that there are no hazards in the chosen space, e.g. power cables, water pipes or anything that should not be damaged.2.Using the Drilling template overleaf mark the locations for the holes to be drilled for the bottom brackets A and B3.Using a pen or pencil mark through the mounting screw holes onto the surface you want to mount to.4.If mounting to a solid wall use a 5.5mm drill bit to make the necessary holes as marked.5.Place a Red fixing raw plug in each hole.6.Line up your bracket holes with the Red raw plugs in the wall and using the screws provided, screw the bracket to the wall, DO NOT OVER TIGHTEN Diagrams overleaf to show orientation of brackets7.Place your device into the brackets A and B and ensure snug fit and attach C and D onto the top of the console equidistant, ENSURE it is firmly in place before marking the hole to drill.8.Use a 5.5mm drill bit and Red raw plug’s if necessary, again.9. Your device is now ready to be plugged in!
10% OFF FUTURE PURCHASES USE CODE 2020D10 WWW.3DCABIN.CO.UK
Manufactured By Jabtek Ltd, CT18 8DF