3idee MSI - G241VC-017 User manual

www.3idee.eu
Instruction manual
The VESA adapter is compatible with the following MSI
products: MSI-G241VC-017.
MSI – G241VC-017

Assembly instruction
Step 1:
- Take the screw bag with the 2 short screws and attach the adapter to the back of your
monitor (see gure 1).
- Make sure that the adapter is rmly screwed to the monitor.
Step 2:
- Recommendation: It is best to carry out this step with the help of a second person.
- Hold the monitor to your VESA arm / mount and insert the 4 longer screws through from
behind until you can screw them to your monitor with the adapter. (see gure 2)
Figure 1
Figure 2
2
Instruction manual

Do not hesitate to ask your questions:
[email protected]
Do not hesitate to call us:
[phone]
Do you have any
questions?
Mail
Tel
Safety instructions
General Notes:
Material Notes:
– Make sure that all screws are tight and
that the monitor audibly clicks into place
during installation.
– The material of the adapter is not heat
resistant. Avoid direct heat in the vicinity of
the adapter, such as PC exhaust air or direct
sunlight.
The adapter is made of high quality
polylactide (PLA) plastic. PLA is both a
colorfast and UV-resistant material and
has low ammability. Polylactide has a low
temperature resistance of about 45°C-55°C
and is therefore not suitable for use around
direct heat and heat sources.
– Avoid jerky movements (pulling, tearing)
on the PC monitor. This can impair the
performance of the VESA adapter.
– Do not subject the PC monitor to
excessive loads such as leaning or pushing.
This may aect the performance of the
VESA adapter.
We wish you a lot of fun with your product.
Your 3idee Team
3idee SARL
19, Rue de Bitbourg
LU-1273 Lussemburgo
3Instruction manual