3R Anyty User manual

2.4GHzWireless Digital Microscope
Comprehensive Operating Instruction

1
Contents
1For your safety 2
2Anyty Series Line up and Accessories 3
Manual of Anyty Series PC Model
P1 How to charge Anyty Wireless Digital Microscope 5
P2 Requirement of using Attached Software（Anyty VIEW）6
P3 Installation of Anyty VIEW（Windows7/Vista）7
P4 Installation of Anyty VIEW（Windows8）12
P5 Simple use of the product 13
P6 Turn the power on and Channel Harmonization 14
P7 About operation of Anyty Digital Microscope 15
P8 Capture with Anyty VIEW 16
P9 Edit images which have been photographed by Anyty VIEW 28
P10 Play movies which have been filmed by Anyty VIEW 30
P11 Spec 31
Manual of Anyty Series TV Model
T1 How to charge Anyty Digital Microscope and LCD Monitor 32
T2 Switch on and Channel Harmonization 34
T3 Simple use of the product 37
T4 About operation of Anyty Digital Microscope 38
T5 Capturing still pictures 39
T6 Capturing movie 40 47
T7 Preview of images/movies 41
T8 Deletion of images/movies 43
T9 About all kinds of setting 44
T10 About all atteched accessory（TV connection・stand）47
T11 Spec（LCD Monitor）48
4Common Fix 49
About the sign of magnification
PLEASE NOTE: The signed Magnification is based on exact size of when using 15 inch monitor. Any using
other size of monitor or specified monitors for TV model could lead to different magnification.

2
1 For your safety
For safety use of the product, prohibition of using and cautions are written.
To ensure customer’s safety, PLEASE read this carefully before using.
Caution
Contents of actions lead to danger to life or serious injury.
Attention
ＴＶ Model has two types of charging adaptors. PLEASE use them properly. DO NOT mix them up.
Attention
DO NOT leave or use the product under direct sunlight and circumstances of high temperature. Otherwise
it would lead to dilation or explosion of the battery. If smoke or smell is emitted, PLEASE stop
using the product immediately.
DO NOT look straight at the light laze from the product.
DO NOT look directly at LED light source. It could damage your Visual Acuity.
AVOIDING touching with wet hands
DO NOT use the product with wet hands or the product in wet conditions. It could lead to electric shock.
Decommissioning prohibited
DO NOT decommission or modify the product. It could lead to electric shock or fire hazard.
DO NOT use Organic Solvent on Resin body
PLEASE note that using of alcohol or thinner for cleaning is prohibited.
DO NOT use supply unit in addition to specified supply unit.
It has danger of causing fire hazard or electric shock.
Caution
Other contents that you should be careful about.
Unplug the power cable from the Microscope, Monitor when the charging is complete.
DO NOT insert fingers in lens part. In addition, DO NOT point strong light to lens part.
Rechargeable batteries are In-built. PLEASE follow the instruction of disposal.

3
2 Anyty Series Line UP and Accessory
This Comprehensive Operating Instruction is for 2.4GHz Wireless Microscope「Anyty」Series.
PLESE NOTE: The combination of Accessory could be different due to the your demanded Model
Contents of Accessories in different type of products mentioned below（To see all contents of every
models, please go to next page）
A. Common Accessories for all models
B. Accessories in Microscope of magnification x 200
C. Accessories in Microscope of magnification x 600
D. Accessories in PC Model
E. Accessories in TV Model
●Operating Instruction（This book）
●Dedicated Case
●Model of magnification x 200
●Three Lens covers
（For x60 / 200）
（For x80 / 150）
（For x100）
●Model of magnification x 600
●Two Lens covers
（For x500）
（For x600）
●USB Receiver ●Product Stand ●AC/USB Adaptor
●miniUSB Cable ●Microscope Charging Cable ●Holder
●Simple Scale ●Software CD
●Dedicated Monitor ●Stand for Monitor ●AC/USB Transform Adaptor
●AC Charger for Monitor ●miniUSB Cable ●Microscope Charging Cable
●TV Cable

4
Summary of common contents in every type of products
Contents and accessories in every Model are noted below. PLEASE check Alphabets in previous page if it contains the
right accessories.
No
Product
Model
Contents
1
2.4GHz Wireless Digital Microscope
Magnification x 200 PC Model
3R-WM401PC
A、B、D
2
2.4GHz Wireless Digital Microscope
Magnification x 200 TV Model
3R-WM401TV
A、B、E
3
2.4GHz Wireless Digital Microscope
Magnification x 600 PC Model
3R-WM601PC
A、C、D
4
2.4GHz Wireless Digital Microscope
Magnification x 600 TV Model
3R-WM601TV
A、C、E
5
2.4GHz Wireless Digital Microscope
Set of Magnification x 200 PC&TV Model
3R-WM401PCTV
A、B、D、E
6
2.4GHz Wireless Digital Microscope
Set of Magnification x 600 PC&TV Model
3R-WM601PCTV
A、C、D、E
7
2.4GHz Wireless Digital Microscope
Magnification of x 200/600 PCModel
3R-WM461PC
A、B、C、D
8
2.4GHz Wireless Digital Microscope
Magnification x 200/600 PC Model
3R-WM461TV
A、B、C、E
9
2.4GHz Wireless Digital Microscope
Full set of Magnification x 200/600 PC
＆TV Model
3R-WM461PCTV
A、B、C、D、E
10
2.4GHz Wireless Digital Microscope
Microscope of Magnification x 200
3R-WM401
A、B
11
2.4GHz Wireless Digital Microscope
Microscope of Magnification x 600
3R-WM601
A、C
12
2.4GHz Wireless Digital Microscope
A Receiver for PC Model
3R-WMSOFTSET
A、D
13
2.4GHz Wireless Digital Microscope
A Monitor for TV model
3R-WMMOTV
A、E
Operation of PC Model →See page 5
Operation of TV Model →See page 32

5
P1 How to charge Anyty Wireless Digital Microscope
Microscope itself is chargeable. Before start using it, please charge the battery of microscope.
Connect charging cable (attached inside) to charging connector on Microscope.
Then, connect to USB port on PC or AC/USB Transform Adaptor.
During charging period, the dial switch will be shining (blue light).
Charging period will be approximately 3 hours. It could last for 5 hours in full power condition.
Attention USB Charging Cable is for Microscope ONLY. DO NOT use ANY other charging cable on it..
Charging Connector
Charging Connector is on back of Microscope.
Dial Switch
Power switch is on side face of Microscope. Turn right until you hear the sound of ‘click’and the power
will be turned on.
Turn left until the same sound is made. The power will be off.
Dial Switch
Dial Switch will be lighting up during charge or operation。Patterns of lighting up in each condition
are noted below.
Charging Blue flash
Charging complete Blue light
Low power Red light

6
P2 Requirements of using attached Software（Anyty VIEW）
Installation of Anyty VIEW will be required in order to be able to use PC Model on PC. Requirements
will be mentioned below.
※The software of this product is not officially compatible with Windows8 purchased in 2012.
To understand the newest compatibility, please contact: [e-mail]
★The minimum specs
Compatible OS※Windows7（32bit / 64bit）
Newer than WindowsXPSP2、Vista （Only for 32 bit）
CPU CPU above Pentium Ⅲ600Mhz
Optics Drive Essential
Memory 256MB or more of Physical Memory
Save Area 100MB or more HD space
Connection Method USB1.1/2.0
Display Space 15 Inch（XGA）or more of display space
Graphics Facility 16bit color or higher graphics facility
Practical use authority Installation and using of the software may require ADM
★Recommended specs
CPU Pentium 4 1.6Ghz or better CPU
Memory 512MB or more memory space
Save Area 10GB or more HD space
Display Space 17 Inch（SXGA）or more display space
Graphics Facility Higher than 16bit color, 64MB or more of Graphics Card

7
P3 Installation of Anyty VIEW（Windows7/Vista）
※The installation could be done irregular if antivirus software is active. PLEASE exit antivirus
software for a while refers to its manual during installation.
※DO NOT connect Receiver to PC until installation is complete.
※Please press ‘Continue’if User Account Control(UAC) is activated.
①Insert Software CD into CD-ROM. The option will be shown as below if auto play is activated. Press
Autorun.exe to start installation.
※If ‘Auto play’is not activated. Please double click ‘My computer’and RIGHT click CD-ROM icon, choose
‘Open’. Then find ‘Autorun.exe’and double click to start installation.

8
②The Menu will be shown as below when set up program is activated. Choose ‘Install Software（32bit）’
or ‘Install Software（64bit）’on the basis of your PC specs.
※Please see 49 page to confirm your PC spec(32bit or 64bit)
③The image will be shown on screen as below. Please press ‘Next’

9
④‘License Agreement’will be shown. To continue installation, please tick ‘I accept'.
Then click ‘Next’.
⑤You could choose which folder to save it at next screen.
Normally, click ‘Next’to start program installation.