3TEMP Hipster PULS User manual

Rev.100317-02
Made in Sweden
PULS 200101
User manual
Hipster PULS

2
Hipster PULS
Rev.100317-02

3
Hipster PULS
Rev.100317-02
Arvika, Sweden; the home of where the Hipster brewer was created and innovated.
It is in this small industrial town in the middle of Sweden, where hard working men and
women reap their harvest of diligent work; a work of tradition and dedicated skilled
craftsmanship. Arvika is sincerely famous for it’s warmth during the summer, for it’s
environment of magnicent forests and foremost for the surroundings of 365 smaller
lakes, that enhance mysticism and stories from the past to the present.
The home of the Hipster brewer.
The Hipster is classied by baristas and coee people all over the world as one of
the best amongst lter coee machines. Hipster is a unique brewer. Unlike any other
brewer in the market it let’s you control blooming, temperatures in 3 phases and water
distribution for each recipe. It is designed and developed in Sweden by a team with vast
experience from the coee industry.
The Hipster is a game changer as it brings lter coee to a new level. Precision of ow
rate, temperature and extraction time are critical factors to reach the best possible
extraction. In order to preserve the coee’s origin in avour and fragrance, makes the
demands high on these 3 parameters precision in order to recreate the same taste
experience time and again.
The fresh water system and the recipe parameters makes a huge impact on the taste
and a tiny impact on the environment as it consumes barely 7 watts when not brewing.
We hope you will enjoy your new Hipster brewer.
With best wishes
Copyright 2021 All rights reserved
3TEMP
The Story
1. Preface

4
Hipster PULS
Rev.100317-02

Rev.100317-02
Table of contents
1. Preface .........................................................................................3
2. Safety information ................................................................6
2.1 Introduction..........................................................................................6
2.2 This user manual...............................................................................6
2.3 Intended use .......................................................................................6
2.4 Capacity of the machine...............................................................7
2.5 General safety instructions .........................................................7
2.6 Disposal..................................................................................................9
3. Before rst use ........................................................................9
4. Product description Hipster PULS............................. 10
4.1 Description......................................................................................... 10
4.2 The cycle of The Hipster taste-proling ............................ 11
5. Technical data........................................................................12
5.1 Hipster PULS......................................................................................12
5.2 Wiring diagram.................................................................................13
6. Unpacking................................................................................14
7. Installation instructions ....................................................15
7.1 Description..........................................................................................15
7.2 Connect the PULS...........................................................................15
7.3 How to change side of the button controller...................16
7.4 Connect the water lter system..............................................18
7.5 Connect the network ....................................................................18
7.6 Start the PULS ..................................................................................18
.........................................................................................................................18
7.7 Machine status..................................................................................19
8. User instructions ................................................................. 20
8.1 Prepare a brew ................................................................................20
8.2 Select recipe ....................................................................................21
8.3 Thermos detachable serving base...................................... 23
9. Recipe settings with button controller. .................. 24
10. Care and maintenance after use.............................. 27
10.1 Cleaning instructions................................................................. 27
10.2 Cleaning thermos........................................................................ 28
10.3 Cleaning water strainer.............................................................31
11. Spare parts ........................................................................... 32
12. Extra additions ................................................................... 33
13. Declaration of conformity ............................................ 34
14. Warranty ................................................................................ 35
15. Notes ....................................................................................... 36

6
Hipster PULS
Rev.100317-02
This appliance is intended to be used in applications such as:
- Oces and other commercial working environments.
- Hotels, motels.
- Bed and breakfast environments.
Switch o the appliance when NOT in use.
Do not use this appliance for anything other than intended use. Any maintenance other
than cleaning should be performed by authorised person.
Do not install the machine in environments in which the temperature is 0 C or less.
Do not use outdoors.
2. Safety information
2.1 Introduction
2.2 This user manual
Information for the user:
Note!
safety instructions
This user manual is an integral part of the appliance and must be kept in an accessible
place under the working life of the appliance.
2.3 Intended use
Warning!
Electric shock hazard!
ALL ELECTRICAL
WORK MUST BE
PERFORMED
BY AN AUTHORIZED
ELECTRICIAN
Save these instructions for future reference.
Caution!
Burn hazard!
Protect your eyes.

7
Hipster PULS
Rev.100317-02
For the optimal performance of the PULS these parameters shall not be exceeded:
Maximum permissible inlet water pressure : 800KPa (8Bar)
Minimum permissible inlet water pressure: 200KPa (2Bar)
Maximum working temperature: 40C
Minimum working temperature: 10 C
Read all the user instructions before using the machine.This guide contains important
instructions for proper and safe use of the Hipster brewer. Always keep this manual close
at hand for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event of technical problems or any
questions. Please contact our [email protected]
The appliance is only to be installed in locations where it can be overseen by trained
personnel.
The English language is used for the original instructions.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance in a safe way and if they
understand the hazards involved by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Cleaning and user maintenance shall not be made by children without supervision.
Access to the service area should only be permitted to persons having knowledge
and practical experience of the appliance, in particular as far as safety and hygiene are
concerned.
The appliance is intended for indoor use and max altitude 2000m.
Warning! In case of improper use the responsibility is on the user.
2.5 General safety instructions
2.4 Capacity of the machine.

8
Hipster PULS
Rev.100317-02
Avoid getting the coee machine wet and do not spray liquids onto it. In the event of contact
with liquid immediately switch o the power at the socket or main breaker and dry the
appliance thoroughly.
Never immerse the machine, plug or mains cable in water because there is a danger of
electric shock.
Never try to put out a re or ames with water. Turn of the appliance and remove the plug
from the socket, and smother the ames with a re blanket or other appropriate cover.
Do not operate any electrical appliance with a damaged cord or after the appliance has been
damaged in any manner. If the mains cable is damaged it must be replaced by the customer
service to avoid a hazard. Only use the attached power cord.
Do not install the machine in environments in which the temperature is 0° C or less.
Do not move the Hipster brewer whilst in operation.
Do not use the Hipster brewer on a sink drain board.
Do not place the Hipster brewer on or near a hot gas or electric burner, or where it could
touch a heated oven.
Keep the appliance and accessories clean. Follow the cleaning instructions provided in this
manual.
Only use original spare parts. The use of spare parts not approved by the
manufacturer could lead to res, electric shocks or personal injury.
Do not place on top of any other appliance.
Appliance must not be cleaned by a water jet.
Electric shock hazard!
This appliance dispense hot water from the brewing hat and may cause injury if not
used correctly. The brew basket must be in place before a recipe is started.
Do not move the brew basket while the coee is being brewed.
Do not touch hot surfaces with your hands; use the handles and buttons.
Burn hazard!

9
Hipster PULS
Rev.100317-02
2.6 Disposal
Do not dispose of the device in household waste! Recycle devices, accessories and
packaging. Observe applicable national regulations.
EU only: In accordance with European Directive on waste electrical and electronic
equipment and implementation in national law, used electric power tools must be
collected separately and handed in for environmentally friendly recycling. By collecting and
recycling waste, you help save natural resources, and make sure the product is disposed in
an environmental friendly and healthy way.
Remove all packaging materials attached to your Hipster PULS. Ensure that you have removed
all parts and accessories before discarding the packaging.
Clean parts and accessories, lter, basket and thermos. Use warm water and a gentle dish
washing liquid and rinse well. Wipe the outer housing and drip tray with a soft damp cloth and
dry thoroughly.
3. Before rst use
Danger! Do not immerse power cord, power plug for appliance in water or any
other liquid. Do not clean any of the parts or accessories in the dishwasher.
Important to clean the product propertly.
Important! Ensure that you have removed all parts and accessories before
discarding the packaging.
Note! We recommend that you save the packaging for a possible return
of goods.

10
Hipster PULS
Rev.100317-02
On / Off
4. Product description Hipster PULS
4.1 Description
Brewer hat
Brew basket
Drip tray insert
Water inlet
connection
Driptray
Touch controller
Thermos 2,5 lThermos 3,8 l
Level tube
Coee tap
On/O
backside

11
Hipster PULS
Rev.100317-02
4.2 The cycle of The Hipster taste-proling
”Regular”
brewer
Target
Pre-brew phase End phase
End phase
Time
Temperature
End phase
+ Blooming
Pre-brew phase

12
Hipster PULS
Rev.100317-02
5. Technical data
5.1 Hipster PULS
Including button controller, router.
The machine is placed on the counter.
Capacity: 200 cups/h (1x3,8 lit).
Dimensions main unit: W 286mm/D 400mm/H 636mm.
Weight total : 21 kg.
Max power hot: 230V 1x2400W.
Max power cold: 1x38W.
Max power idle: 7 W.
286 56
636
399,26

13
Hipster PULS
Rev.100317-02
5.2 Wiring diagram.
220-240 VAC 2400W

14
Hipster PULS
Rev.100317-02
6. Unpacking
Thermos 2,5 Litres
Inlet hose
Router
Coee lter 1x 25. 110/330
Brew basket plastic

15
Hipster PULS
Rev.100317-02
On / Off
7. Installation instructions
ALL ELECTRICAL
WORK MUST BE
PERFORMED
BY AN AUTHORIZED
ELECTRICIAN
7.1 Description
Spirit-level,
Hex key 4 mm
2,5 mm
Tools needed:
7.2 Connect the PULS
1. Fasten the cords.
Tighten the inlet hose on the backside, according to
national standard ref. cl. 7.12.1 in 60335-2-75.
LANPower inlet
Inlet hose
Place machine on a horizontal at surface

16
Hipster PULS
Rev.100317-02
Metal panels
Adhesive tape
7.3 How to change side of the button controller.
This side is for
the button controller.
This side is for
the button controller
1. Decide where to place the button
controller either on the left hand side or the
right hand side
2. Fasten the panels with the magnets and the
bracket for the button controller.
Wood panels

17
Hipster PULS
Rev.100317-02
Route the CAN cable through the side wall .
Attach the CAN cable to the backside of the plug.
Tighten the screw with a hex key.
A
A
A
B
B
C
C
3. . Fasten the button controller and attach
the CAN cable.

18
Hipster PULS
Rev.100317-02
7.4 Connect the water lter system.
Connect the network cable (RJ45) white cable. To the LAN-port of the router.
1. Start the router 1 minute before the coee machine, to get an IP-address.
2. Start the machine, see 7.6 “Start the PULS
3.A short beep sound means the brewer is on.
4. After 3-8 sec long beep means that the brewer have received an IP-address.
5, Start a run cold. 300-400 ml will be dispensed,
6. Now the PULS is installed. You are now ready to brew see page 20.
Note! See manual with the lter set.
7.5 Connect the network
7.6 Start the PULS
1. Press ON button to start the PULS
On / Off
On/O
backside

19
Hipster PULS
Rev.100317-02
Note! For 3TEMP to be able to support you in the best possible way,
please connect your Hipster to the internet via LAN, WLAN or GSM.
Use tethering on the router and connect to your existing Wi-Fi.
If you need support, please send us an email to [email protected]om or call your
nearest support.
If you want to give us feedback on the product; please send us an email to
[email protected]
O
Startup
Idle Green
Running Blue
Heater error Red slow blink
Connector error Red fast blink
Watersupply error Red fast blink
State name Led
7.7 Machine status
recipe
1-8
start/stop
grams of coffee
thermos
1-8
setup
+
HIPSTER

20
Hipster PULS
Rev.100317-02
8. User instructions
8.1 Prepare a brew
1. Place the thermos under the brew basket. 2. Remove the brew basket from
the brew hat.
3. Add lter to the brew basket. 4. Add coee into the lter
Note! Make sure the lter ts correct.
Use 3TEMP coee lter paper
Note! Make sure the coee is spread
evenly and the surface is at.
Danger! Can cause serious burns. Do not remove the brew basket while brewing
and the lamp indicator ashes blue.